skip to main content

Attention:

The NSF Public Access Repository (PAR) system and access will be unavailable from 11:00 PM ET on Friday, December 13 until 2:00 AM ET on Saturday, December 14 due to maintenance. We apologize for the inconvenience.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Expedition 405 Scientific Prospectus: Tracking Tsunamigenic Slip Across the Japan Trench (JTRACK)
The 11 March 2011 M 9.0 Tohoku-oki earthquake was one of the largest earthquakes ever recorded and was accompanied by a devastating tsunami. Slip during the earthquake was exceptionally large at shallow depth on the plate boundary fault, which was one of the primary factors that contributed to the extreme tsunami amplitudes that inundated the coast of Japan. International Ocean Discovery Program Expedition 405 aims to investigate the conditions and processes that facilitated the extremely shallow slip on the subduction interface in the 2011 Tohoku-oki earthquake. Proposed work includes coring and logging operations at two sites in a transect across the trench. The first site, located within the overriding plate, will access the fault zone in the region of large shallow slip, targeting the plate boundary décollement, overlying frontal prism, and subducted units cut by the décollement. The second site, located on the Pacific plate, will access the undisturbed sedimentary and volcanic inputs to the subduction zone. A borehole observatory will be installed into the décollement and surrounding rocks to provide measurements of the temperature in and around the fault over the following several years. Sampling, geophysical logs, and the observatory temperature time series will document the compositional, structural, mechanical, and frictional properties of the rocks in the décollement and adjacent country rock, as well as the hydrogeologic structure and pore fluid pressure of the fault zone and frontal prism—key properties that influence the effective stress to facilitate earthquake slip and potential for large slip. Results from Expedition 405 will address fundamental questions about earthquake slip on subduction zones that may directly inform earthquake and tsunami hazard assessments around the world.  more » « less
Award ID(s):
1326927
PAR ID:
10435226
Author(s) / Creator(s):
; ; ; ; ; ; ; ; ;
Date Published:
Journal Name:
Scientific prospectus
Volume:
405
ISSN:
2332-1385
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ( , Scientific prospectus)
    null (Ed.)
    The 2004 Mw 9.2 earthquake and tsunami that struck North Sumatra and the Andaman-Nicobar Islands devastated coastal communities around the Indian Ocean and was the first earthquake to be analyzed by modern techniques. This earthquake and the Tohoku-Oki Mw 9.0 earthquake and tsunami in 2011 showed unexpectedly shallow megathrust slip. In the case of North Sumatra, this shallow slip was focused beneath a distinctive plateau of the accretionary prism. This intriguing seismogenic behavior and forearc structure are not well explained by existing models or by relationships observed at margins where seismogenic slip typically occurs farther landward. The input materials of the North Sumatran subduction zone are a distinctive, thick (up to 4–5 km) sequence of primarily Bengal-Nicobar Fan–related sediments. This sequence shows strong evidence for induration and dewatering and has probably reached the temperatures required for sediment-strengthening diagenetic reactions prior to accretion. The correspondence between the 2004 rupture location and the overlying prism plateau, as well as evidence for a strengthened input section, suggests the input materials are key to driving the distinctive slip behavior and long-term forearc structure. The aim of Expedition 362 is to begin to understand the nature of seismogenesis in North Sumatra through sampling these input materials and assessing their evolution, en route to understanding such processes on related convergent margins. Properties of the incoming section affect the strength of the wedge interior and base, likely promoting the observed plateau development. In turn, properties of deeper input sediment control décollement position and properties, and hence hold the key to shallow coseismic slip. During Expedition 362, two primary, riserless sites (proposed Sites SUMA-11C and SUMA-12A) will be drilled on the oceanic plate to analyze the properties of the input materials. Coring, downhole pressure and temperature measurements, and wireline logging at these sites will constrain sediment deposition rates, diagenesis, thermal and physical properties, and fluid composition. Postexpedition experimental analyses and numerical models will be employed to investigate the mechanical and frictional behavior of the input section sediments/sedimentary rocks as they thicken, accrete, and become involved in plate boundary slip system and prism development. These samples and downhole measurements will augment the internationally collected site survey bathymetric, seismic, and shallow core data that provide the regional geological framework of the margin. 
    more » « less
  2. ; ; ( , Seismica)
    NA (Ed.)

    We investigate the impact of outer-rise normal fault subduction on the structural evolution of the décollement and frontal prism in a portion of the Japan trench that hosted the 2011 Tohoku earthquake. We use seismic reflection data to map the relative occurrence of sediment accretion, sediment subduction, and frontal tectonic erosion in the shallow portion of the subduction zone and correlate these deformation styles to the magnitude of outer-rise fault throw and incoming plate sediment thickness. These data reveal spatial heterogeneity in the modes of deformation over distances of 5-10 km that necessitate correlative heterogeneity in the geometry and composition of the shallow décollement over similar length-scales. We find that sediment accretion predominantly occurs in regions where incoming plate sediment thickness is greater than fault throw. In these areas, the décollement appears to be non-planar and compositionally homogenous. Conversely, frontal tectonic erosion and slope failures are predominantly observed in regions where fault throw is greater than sediment thickness. In these areas, the décollement may be planar but compositionally heterogeneous. Additionally, spatial variations in near trench slip appear to correlate with the dominant deformation modes, suggesting that both sediment thickness and outer-rise fault throw may be important controls on shallow megathrust behavior.

     
    more » « less
  3. ; ; ( , Proceedings of the International Ocean Discovery Program)
    null (Ed.)
    Drilling the input materials of the north Sumatran subduction zone, part of the 5000 km long Sunda subduction zone system and the origin of the Mw ~9.2 earthquake and tsunami that devastated coastal communities around the Indian Ocean in 2004, was designed to groundtruth the material properties causing unexpectedly shallow seismogenic slip and a distinctive forearc prism structure. The intriguing seismogenic behavior and forearc structure are not well explained by existing models or by relationships observed at margins where seismogenic slip typically occurs farther landward. The input materials of the north Sumatran subduction zone are a distinctively thick (as thick as 4–5 km) succession of primarily Bengal-Nicobar Fan–related sediments. The correspondence between the 2004 rupture location and the overlying prism plateau, as well as evidence for a strengthened input section, suggest the input materials are key to driving the distinctive slip behavior and long-term forearc structure. During Expedition 362, two sites on the Indian oceanic plate ~250 km southwest of the subduction zone, Sites U1480 and U1481, were drilled, cored, and logged to a maximum depth of 1500 meters below seafloor. The succession of sediment/rocks that will develop into the plate boundary detachment and will drive growth of the forearc were sampled, and their progressive mechanical, frictional, and hydrogeological property evolution will be analyzed through postcruise experimental and modeling studies. The large penetration depths with good core recovery and successful wireline logging in the challenging submarine fan materials will enable evaluation of the role of thick sedimentary subduction zone input sections in driving shallow slip and amplifying earthquake and tsunami magnitudes at the Sunda subduction zone and globally at other subduction zones where submarine fan–influenced sections are being subducted. 
    more » « less
  4. ; ; ( , Preliminary report)
    null (Ed.)
    Drilling the input materials of the north Sumatran subduction zone, part of the 5000 km long Sunda subduction zone system and the origin of the Mw ~9.2 earthquake and tsunami that devastated coastal communities around the Indian Ocean in 2004, was designed to groundtruth the material properties causing unexpectedly shallow seismogenic slip and a distinctive forearc prism structure. The intriguing seismogenic behavior and forearc structure are not well explained by existing models or by relationships observed at margins where seismogenic slip typically occurs farther landward. The input materials of the north Sumatran subduction zone are a distinctively thick (as thick as 4–5 km) succession of primarily Bengal-Nicobar Fan–related sediments. The correspondence between the 2004 rupture location and the overlying prism plateau, as well as evidence for a strengthened input section, suggest the input materials are key to driving the distinctive slip behavior and long-term forearc structure. During Expedition 362, two sites on the Indian oceanic plate ~250 km southwest of the subduction zone, Sites U1480 and U1481, were drilled, cored, and logged to a maximum depth of 1500 meters below seafloor. The succession of sediment/rocks that will develop into the plate boundary detachment and will drive growth of the forearc were sampled, and their progressive mechanical, frictional, and hydrogeological property evolution will be analyzed through postcruise experimental and modeling studies. Large penetration depths with good core recovery and successful wireline logging in the challenging submarine fan materials will enable evaluation of the role of thick sedimentary subduction zone input sections in driving shallow slip and amplifying earthquake and tsunami magnitudes, at the Sunda subduction zone and globally at other subduction zones where submarine fan–influenced sections are being subducted. 
    more » « less
  5. ; ; ; ; ( , Nature Communications)
    Abstract

    Extreme slip at shallow depths on subduction zone faults is a primary contributor to tsunami generation by earthquakes. Improving earthquake and tsunami risk assessment requires understanding the material and structural conditions that favor earthquake propagation to the trench. We use new biomarker thermal maturity indicators to identify seismic faults in drill core recovered from the Japan Trench subduction zone, which hosted 50 m of shallow slip during theMw9.1 2011 Tohoku-Oki earthquake. Our results show that multiple faults have hosted earthquakes with displacement ≥ 10 m, and each could have hosted many great earthquakes, illustrating an extensive history of great earthquake seismicity that caused large shallow slip. We find that lithologic contrasts in frictional properties do not necessarily determine the likelihood of large shallow slip or seismic hazard.

     
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email