An official website of the United States government
We introduce and experimentally demonstrate a miniaturized integrated spectrometer operating over a broad bandwidth in the short-wavelength infrared (SWIR) spectrum that combines an add-drop ring resonator narrow band filter with a distributed Bragg reflector (DBR) based broadband filter realized in a silicon photonic platform. The contra-directional coupling DBR filter in this design consists of a pair of waveguide sidewall gratings that act as a broadband filter (i.e., 3.9 nm). The re-directed beam is then fed into the ring resonator which functions as a narrowband filter (i.e., 0.121 nm). In this scheme the free spectral range (FSR) limitation of the ring resonator is overcome by using the DBR as a filter to isolate a single ring resonance line. The overall design of the spectrometer is further simplified by simultaneously tuning both components through the thermo-optic effect. Moreover, several ring-grating spectrometer cells with different central wavelengths can be stacked in cascade in order to cover a broader spectrum bandwidth. This can be done by centering each unit cell on a different center wavelength such that the maximum range of one-unit cell corresponds to the minimum range of the next unit cell. This configuration enables high spectral resolution over a large spectral bandwidth and high extinction ratio (ER), making it suitable for a wide variety of applications.
more »
« less
Maximizing Archimedes spiral packing density area
In this paper, we experimentally demonstrate a broadband Archimedes spiral delay line with high packing density on a silicon photonic platform. This high density is achieved by optimizing the gap between the adjacent waveguides (down to sub-micron scale) in the spiral configuration. However, care must be taken to avoid evanescent coupling, the presence of which will cause the spiral to behave as a novel type of distributed spiral resonator. To this end, an analytical model of the resonance phenomenon was developed for a simple spiral. Moreover, it is demonstrated that this distributed spiral resonator effect can be minimized by ensuring that adjacent waveguides in the spiral configuration have different propagation constants ( β ). Experimental validations were accomplished by fabricating and testing multiple spiral waveguides with varying lengths (i.e., 0.4, 0.8, and 1.4 mm) and separation gaps (i.e., 300 and 150 nm). Finally, a Linear Density Figure of Merit (LDFM) is introduced to evaluate the packing efficiency of various spiral designs in the literature. In this work, the optimum experimental design with mitigated resonance had a length of 1.4mm and occupied an area of 60 × 60µm, corresponding to an LDFM of 388km -1 .
more »
« less
- Award ID(s):
- 2023730
- PAR ID:
- 10440232
- Date Published:
- Journal Name:
- Optics Express
- Volume:
- 30
- Issue:
- 21
- ISSN:
- 1094-4087
- Page Range / eLocation ID:
- 39040
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
The development of manufacturable and scalable integrated nonlinear photonic materials is driving key technologies in diverse areas, such as high-speed communications, signal processing, sensing, and quantum information. Here, we demonstrate a nonlinear platform—InGaP-on-insulator—optimized for visible-to-telecommunication wavelength χ(2) nonlinear optical processes. In this work, we detail our 100 mm wafer-scale InGaP-on-insulator fabrication process realized via wafer bonding, optical lithography, and dry-etching techniques. The resulting wafers yield 1000 s of components in each fabrication cycle, with initial designs that include chip-to-fiber couplers, 12.5-cm-long nested spiral waveguides, and arrays of microring resonators with free-spectral ranges spanning 400–900 GHz. We demonstrate intrinsic resonator quality factors as high as 324 000 (440 000) for single-resonance (split-resonance) modes near 1550 nm corresponding to 1.56 dB/cm (1.22 dB/cm) propagation loss. We analyze the loss vs waveguide width and resonator radius to establish the operating regime for optimal 775–1550 nm phase matching. By combining the high χ(2) and χ(3) optical nonlinearity of InGaP with wafer-scale fabrication and low propagation loss, these results open promising possibilities for entangled-photon, multi-photon, and squeezed light generation.more » « less
-
Optical delay lines control the flow of light in time, introducing phase and group delays for engineering interferences and ultrashort pulses. Photonic integration of such optical delay lines is essential for chip-scale lightwave signal processing and pulse control. However, typical photonic delay lines based on long spiral waveguides require extensively large chip footprints, ranging from mm2to cm2scales. Here we present a scalable, high-density integrated delay line using a skin-depth engineered subwavelength grating waveguide, i.e., an extreme skin-depth (eskid) waveguide. The eskid waveguide suppresses the crosstalk between closely spaced waveguides, significantly saving the chip footprint area. Our eskid-based photonic delay line is easily scalable by increasing the number of turns and should improve the photonic chip integration density.more » « less
-
Electron Paramagnetic Resonance (EPR) is an important technique for the investigation of the structure and function of metalloproteins and enzymes. The variety of questions in this line of research requires versatile instrumentation. In this work, we explored the utility of the open resonator concept for a general-use highly tunable TE011 resonator design at Q-band frequencies (≈ 34 GHz). Using proof-of-concept calculations, we establish a viable range of critical parameters compatible with the desired instrument specifications. We then present the resonator design, targeting ease of execution and handling. Experimental characterization of the built resonator shows high tunability. Specifically, we show that the resonator can be critically coupled and overcoupled with a three-fold change in the bandwidth using a matching short. We also show that the resonator can be incorporated with frequency tuning by means of movable axial plungers, allowing it to work with a wide range of samples using relatively narrow-bandwidth microwave instrumentation. Furthermore, because of its high tunability, the resonator is very tolerant of manufacturing imperfections, which makes it affordable and easy to execute with minimal tooling. We also discuss the long-term use of the resonator in our research, highlighting its versatility.more » « less
-
Wind instruments containing a resonator (i.e., pipe) with an open end are expected to exhibit an acoustic standing wave characterized by a density oscillation whose amplitude falls to zero a short distance beyond the end of the resonator. An extrapolation of this amplitude based on the behavior inside the resonator yields an “effective” node of the standing wave (i.e., a point at which the extrapolated amplitude vanishes), and the distance from the end of the resonator to the location of this effective node (which is commonly referred to as simply a “node”) is known as the “end correction.” Recent work using a novel optical technique involving optical speckle patterns surprisingly suggested instead that a node is located inside the resonator with unexpected structure in the standing wave amplitude just beyond the end of the resonator. We have studied this problem by numerically solving the Navier-Stokes equations and find that the effective node of the density oscillation is located at the expected position outside the resonator with no unexpected structure in the functional form of the standing wave. We also show how pressure gradients and the flow pattern found near the end of the resonator can account for the unexpected behavior observed in the experiments. This sensitivity of optical interference effects to flow structure may give a new experimental way to investigate vorticity and other complex flows found in the mouthpiece of a musical instrument and in other situations.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1364/OE.470249
