Optical levitation of dielectric particles in vacuum is a powerful technique for precision measurements, testing fundamental physics, and quantum information science. Conventional optical tweezers require bulky optical components for trapping and detection. Here, we design and fabricate an ultrathin dielectric metalens with a high numerical aperture of 0.88 at 1064 nm in vacuum. It consists of 500-nm-thick silicon nano-antennas, which are compatible with an ultrahigh vacuum. We demonstrate optical levitation of nanoparticles in vacuum with a single metalens. The trapping frequency can be tuned by changing the laser power and polarization. We also transfer a levitated nanoparticle between two separated optical tweezers. Optical levitation with an ultrathin metalens in vacuum provides opportunities for a wide range of applications including on-chip sensing. Such metalenses will also be useful for trapping ultracold atoms and molecules.
We describe the design, construction, and operation of an apparatus that utilizes a piezoelectric transducer for in-vacuum loading of nanoparticles into an optical trap for use in levitated optomechanics experiments. In contrast to commonly used nebulizer-based trap-loading methods that generate aerosolized liquid droplets containing nanoparticles, the method produces dry aerosols of both spherical and high-aspect ratio particles ranging in size by approximately two orders of magnitude. The device has been shown to generate accelerations of order 107 g, which is sufficient to overcome stiction forces between glass nanoparticles and a glass substrate for particles as small as 170 nm in diameter. Particles with sizes ranging from 170 nm to ∼10μm have been successfully loaded into optical traps at pressures ranging from 1 bar to 0.6 mbar. We report the velocity distribution of the particles launched from the substrate, and our results indicate promise for direct loading into ultra-high-vacuum with sufficient laser feedback cooling. This loading technique could be useful for the development of compact fieldable sensors based on optically levitated nanoparticles as well as matter–wave interference experiments with ultra-cold nano-objects, which rely on multiple repeated free-fall measurements and thus require rapid trap re-loading in high vacuum conditions.
more » « less- Award ID(s):
- 2110524
- NSF-PAR ID:
- 10440302
- Publisher / Repository:
- American Institute of Physics
- Date Published:
- Journal Name:
- Review of Scientific Instruments
- Volume:
- 93
- Issue:
- 11
- ISSN:
- 0034-6748
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
-
more » « less
In this paper, we discuss a technique for selectively loading a particle into a magneto-gravitational trap using the sublimation of camphor to release particles from a tungsten probe tip directly into the trapping region. This sublimation-activated release (SAR) loading technique makes use of micropositioners with tungsten probe tips, as well as the relatively fast rate of sublimation of camphor at room temperature, to selectively load particles having diameters ranging from 8 to 100 μm or more. The advantages of this method include its ability to selectively load unique particles or particles in limited supply, its low loss compared to alternative techniques, the low speed of the particle when released, and the versatility of its design, which allows for loading into traps with complex geometries. SAR is demonstrated here by loading a particle into a magneto-gravitational trap, but the technique could also be applicable to other levitated optomechanical systems.
-
more » « less
The center-of-mass motion of optically trapped dielectric nanoparticles in a vacuum is extremely well decoupled from its environment, making a powerful tool for measurements of feeble subattonewton forces. We demonstrate a method to trap and maneuver nanoparticles in an optical standing wave potential formed by retroreflecting a laser beam from a metallic mirror surface. We can reliably position a
diameter silica nanoparticle at distances of a few hundred nanometers to tens of micrometers from the surface of a gold-coated silicon mirror by transferring it from a single-beam tweezer trap into the standing wave potential. We can further measure forces experienced by the particle while scanning the two-dimensional space parallel to the mirror surface, and we find no significant excess force noise in the vicinity of the surface. This method may enable three-dimensional scanning force sensing near surfaces using optically trapped nanoparticles, promising for high-sensitivity scanning force microscopy, tests of the Casimir effect, and tests of the gravitational inverse square law at micrometer scales. -
more » « less
Abstract Levitated diamond particles in high vacuum with internal spin qubits have been proposed for exploring macroscopic quantum mechanics, quantum gravity, and precision measurements. The coupling between spins and particle rotation can be utilized to study quantum geometric phase, create gyroscopes and rotational matter-wave interferometers. However, previous efforts in levitated diamonds struggled with vacuum level or spin state readouts. To address these gaps, we fabricate an integrated surface ion trap with multiple stabilization electrodes. This facilitates on-chip levitation and, for the first time, optically detected magnetic resonance measurements of a nanodiamond levitated in high vacuum. The internal temperature of our levitated nanodiamond remains moderate at pressures below 10−5Torr. We have driven a nanodiamond to rotate up to 20 MHz (1.2 × 109rpm), surpassing typical nitrogen-vacancy (NV) center electron spin dephasing rates. Using these NV spins, we observe the effect of the Berry phase arising from particle rotation. In addition, we demonstrate quantum control of spins in a rotating nanodiamond. These results mark an important development in interfacing mechanical rotation with spin qubits, expanding our capacity to study quantum phenomena.
-
Bio-inspired pinecone-like bioactive glasses consisting of ordered thin-layers separated by consistent cavities were synthesized using a sol–gel process. The short diameter of the as-produced particles was as short as 161 nm, and the surface area was as high as 280 m 2 g −1 . The pore volume, ranging from ∼0.74 cm 3 g −1 to ∼0.67 cm 3 g −1 , could be modulated by the aqueous ammonia concentration. The surface was further tailored for positive charges by amino grafting. The as-produced nanoparticles could successfully enter cells via endocytosis. The microRNA delivery of the bioactive glass particles was further investigated by fluorescence microscopy and flow cytometry, indicating a loading efficiency and transfection efficiency greater than 90%. The potential of such particles as drug carriers was also studied. CCK8, live–dead cell staining and PI/annexinV double staining analyses confirmed that the bioactive glass particles loaded with antitumour doxorubicin (DOX) significantly accelerated the apoptosis of tumour cells. These bio-inspired bioactive glasses are promising as novel vectors for drug and microRNA delivery with high efficiency.more » « less
