An official website of the United States government
Abstract We demonstrate an electrically-driven metal-dielectric photonic crystal emitter by fabricating a series of organic light emitting diode microcavities in a vertical stack. The states of the individual microcavities are shown to split into bands of hybridized photonic energy states through interaction with adjacent cavities. The propagating photonic modes within the crystal depend sensitively on the unit cell geometry and the optical properties of the component materials. By systematically varying the metallic layer thicknesses, we show control over the density of states and band center. The emergence of a tunable photonic band gap due to an asymmetry-introduced Peierls distortion is demonstrated and correlated to the unit cell configuration. This work develops a class of one dimensional, planar, photonic crystal emitter architectures enabling either narrow linewidth, multi-mode, or broadband emission with a high degree of tunability.
more »
« less
High Symmetry Metal‐Dielectric Photonic Crystal Organic Light Emitting Diodes With Single‐Cavity Unit Cells
Abstract Vertically‐stacked organic light emitting diode (OLED) microcavities form 1D metal‐dielectric photonic crystals (MDPC) with many degrees of freedom for engineering complex emission profiles. The photonic band structure of the MDPC OLED is determined by the underlying unit cell and is particularly sensitive to the properties of the metallic electrodes. The electronic requirements of microcavity OLED fabrication often necessitate dissimilar metallic electrodes to achieve good performance. This can profoundly impact the photonic properties of a MDPC by doubling the unit cell length. This work presents a MDPC OLED formed with single‐cavity unit cells by employing optically similar Ag alloys as the semi‐transparent electrode materials. The crystal is found to display a single photonic band without a band gap up to eight stacked cavities. The states within the band are evenly‐spaced and clearly resolved, which is critical for applications seeking to utilize specific photonic states. Design considerations are presented for optimizing the photonic behavior of MDPC OLEDs through selective control of the optical properties of metallic alloys.
more »
« less
- Award ID(s):
- 1932677
- PAR ID:
- 10440361
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Optical Materials
- Volume:
- 11
- Issue:
- 2
- ISSN:
- 2195-1071
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
In this paper, a 1-bit wideband reconfigurable intelligent surface (RIS) design operating at sub-6 band is proposed. The unit cells of the RIS surface are designed based on a three-layer stacked patch structure. Employing a 1-bit PIN diode to reconfigure the phase states, a phase difference of 𝟏𝟖𝟎𝟎 ± 𝟐𝟎𝟎 is observed over the frequency range of 4.81 – 5.77 GHz, corresponding to a 19.2% fractional bandwidth. The reflection magnitude of the unit cell is above –3 dB in the band of interest, and the cross-polarization of the scattered waves is found significantly lower than the single-patch structure. The RIS array with a dimension of 𝟖. 𝟐𝝀 × 𝟓. 𝟏𝝀 , corresponding to a 𝟏𝟔 × 𝟏𝟎 array is structured according to the proposed unit cell with good beam steering capabilities.more » « less
-
The newly discovered graded photonic super-crystal (GPSC) with a large size of unit cell can have novel optical properties that have not been explored. The unit super-cell in the GPSC can be designed to be large or small and thus the GPSC can have no photonic band gap or several gaps. The photonic band structures in Si GPSC can help predict the light absorption in Si. Photonic resonance modes help enhance the absorption of light in silicon; however, photonic band gaps decrease the absorption for light with a large incident angle. The Si device patterned in GPSC with a unit super-cell of 6a × 6a (a is a lattice constant in traditional photonic crystal) has a broadband high absorption with strong incident-angular dependence. The device with the unit super-cell of 12a × 12a has relatively low light absorption with weak incident-angle dependence. The Si GPSC with a unit super-cell of 8a × 8a combines both advantages of broadband high absorption and weak dependence of absorption on the incident angle.more » « less
-
Here, we present results of a computational study of electronic, magnetic, and structural properties of FeVTaAl and FeCrZrAl, quaternary Heusler alloys that have been recently reported to exhibit spin-gapless semiconducting behavior. Our calculations indicate that these materials may crystallize in regular Heusler cubic structure, which has a significantly lower energy than the inverted Heusler cubic phase. Both FeVTaAl and FeCrZrAl exhibit ferromagnetic alignment, with an integer magnetic moment per unit cell at equilibrium lattice constant. Band structure analysis reveals that while both FeVTaAl and FeCrZrAl indeed exhibit nearly spin-gapless semiconducting electronic structure at their optimal lattice parameters, FeVTaAl is a 100% spin-polarized semimetal, while FeCrZrAl is a magnetic semiconductor. Our calculations indicate that expansion of the unit cell volume retains 100% spin-polarization of both compounds. In particular, both FeVTaAl and FeCrZrAl are 100% spin-polarized magnetic semiconductors at the largest considered lattice constant. At the same time, at smaller lattice parameters, both compounds exhibit a more complex electronic structure, somewhat resembling half-metallic properties. Thus, both of these alloys may be potentially useful for practical applications in spin-based electronics, but their electronic structure is very sensitive to the external pressure. We hope that these results will stimulate experimental efforts to synthesize these materials.more » « less
-
We introduce and experimentally demonstrate a miniaturized integrated spectrometer operating over a broad bandwidth in the short-wavelength infrared (SWIR) spectrum that combines an add-drop ring resonator narrow band filter with a distributed Bragg reflector (DBR) based broadband filter realized in a silicon photonic platform. The contra-directional coupling DBR filter in this design consists of a pair of waveguide sidewall gratings that act as a broadband filter (i.e., 3.9 nm). The re-directed beam is then fed into the ring resonator which functions as a narrowband filter (i.e., 0.121 nm). In this scheme the free spectral range (FSR) limitation of the ring resonator is overcome by using the DBR as a filter to isolate a single ring resonance line. The overall design of the spectrometer is further simplified by simultaneously tuning both components through the thermo-optic effect. Moreover, several ring-grating spectrometer cells with different central wavelengths can be stacked in cascade in order to cover a broader spectrum bandwidth. This can be done by centering each unit cell on a different center wavelength such that the maximum range of one-unit cell corresponds to the minimum range of the next unit cell. This configuration enables high spectral resolution over a large spectral bandwidth and high extinction ratio (ER), making it suitable for a wide variety of applications.more » « less
