skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • Interrogating the Effect of Assay Media on the Rate of Virus Inactivation of High‐Touch Copper Surfaces: A Materials Science Approach
Title: Interrogating the Effect of Assay Media on the Rate of Virus Inactivation of High‐Touch Copper Surfaces: A Materials Science Approach
Abstract Contamination of high‐touch surfaces with infected droplets of bodily secretions is a known route of virus transmission. Copper surfaces have been reported to inactivate human coronaviruses after several minutes, via the release of Cu cations. Utilization of copper alloys for high‐touch surfaces can be a pivotal preemptive strategy for preventing the next pandemic. Understanding the true efficacy by which copper, and copper alloys, inactivate the virus under realistic conditions is essential for tuning intrinsic alloy features such as composition, grain orientation, and surface attributes, to optimize for antiviral function. However, virus inactivation measurements depend on the presence of an assay media (AM) solution as a carrier for the virus, and its effects on the surface properties of pure copper that regulate oxidative copper release are previously unknown. Herein, these properties and the influence of AM on the efficacy of virus inactivation occurring on the surface of pure copper are investigated. The process is uncovered by which a five‐fold decrease in virus half‐life is observed in simulated real‐life conditions, relative to exposure to traditional AM. The investigation highlights the notion that virus inactivation on copper surfaces may be significantly more effective than previously thought.  more » « less
Award ID(s):
2040273
PAR ID:
10445940
Author(s) / Creator(s):
 ;  ;  ;  ;  ;  ;  ;  
Publisher / Repository:
Wiley Blackwell (John Wiley & Sons)
Date Published:
Journal Name:
Advanced Materials Interfaces
Volume:
9
Issue:
17
ISSN:
2196-7350
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; (, Environmental Science & Technology)
    null (Ed.)
    UV254 disinfection strategies are commonly applied to inactivate pathogenic viruses in water, food, air, and on surfaces. There is a need for methods that rapidly predict the kinetics of virus inactivation by UV254, particularly for emerging and difficult-to-culture viruses. We conducted a systematic literature review of inactivation rate constants for a wide range of viruses. Using these data and virus characteristics, we developed and evaluated linear and nonlinear models for predicting inactivation rate constants. Multiple linear regressions performed best for predicting the inactivation kinetics of (+) ssRNA and dsDNA viruses, with cross-validated root mean squared relative prediction errors similar to those associated with experimental rate constants. We tested the models by predicting and measuring inactivation rate constants of a (+) ssRNA mouse coronavirus and a dsDNA marine bacteriophage; the predicted rate constants were within 7% and 71% of the experimental rate constants, respectively, indicating that the prediction was more accurate for the (+) ssRNA virus than the dsDNA virus. Finally, we applied our models to predict the UV254 rate constants of several viruses for which high-quality UV254 inactivation data are not available. Our models will be valuable for predicting inactivation kinetics of emerging or difficult-to-culture viruses. 
    more » « less
  2. ; ; ; ; ; ; ; ; ; ; et al (, eLife)
    null (Ed.)
    Ambient temperature and humidity strongly affect inactivation rates of enveloped viruses, but a mechanistic, quantitative theory of these effects has been elusive. We measure the stability of SARS-CoV-2 on an inert surface at nine temperature and humidity conditions and develop a mechanistic model to explain and predict how temperature and humidity alter virus inactivation. We find SARS-CoV-2 survives longest at low temperatures and extreme relative humidities (RH); median estimated virus half-life is >24 hours at 10C and 40% RH, but ~1.5 hours at 27C and 65% RH. Our mechanistic model uses fundamental chemistry to explain why inactivation rate increases with increased temperature and shows a U-shaped dependence on RH. The model accurately predicts existing measurements of five different human coronaviruses, suggesting that shared mechanisms may affect stability for many viruses. The results indicate scenarios of high transmission risk, point to mitigation strategies, and advance the mechanistic study of virus transmission. 
    more » « less
  3. ; ; ; ; (, Materials)
    Dental amalgam is an alloy consisting of a mixture of fine metallic powder of silver, tin, zinc, copper, and a trace amount of palladium in combination with about fifty percent elemental mercury that forms a matrix phase. Dental amalgams consisting of a high-copper content are the most common types of alloys currently utilized for the restoration of decayed, broken, and fractured posterior human teeth. The present research objective was primarily to improve the material properties by determining and analyzing the amount of mercury vapor released from dental amalgam received from eight different commercial brands. The mechanical hardness of the alloys was found to increase with an increase in copper content in the amalgam. The effect of copper addition on material aging was also studied. During the release of mercury vapor, the corresponding energies associated with the release of mercury vapor from each sample were determined for each successive measurement. The results indicated that increasing the copper content of the amalgam counters the release of mercury vapor from posterior teeth and improves the hardness properties. 
    more » « less
  4. ; (, Metals)
    Advanced manufacturing techniques such as Additive Manufacturing (AM) have grown rapidly in major industries such as aerospace, automotive, and biomedical device manufacturing. Biomedical industry has benefitted immensely from AM because of its flexibility in design and its rapid production cycle. Powder bed processes are the major production technique for metal-based AM implants. This paper serves as a comprehensive review on the research efforts being made using AM to develop new patient centered medical devices. This review focuses on AM of the most common metals for biomedical applications, Magnesium alloys, Cobalt-Chromium alloys, pure Titanium, Titanium alloys. Several different aspects are discussed including biocompatibility and osseointegration, application of specific metals in different types of implants, their advantages and disadvantages, mechanical properties in comparison to bone, and their production technologies. Regulatory and quality assurance hurdles that are facing new innovations made using AM are discussed. 
    more » « less
  5. ; ; (, Frontiers in Food Science and Technology)
    We propose a special design enclosure device that promotes isotropic distribution of germicidal UV-C light for the effective disinfection of difficult to reach surfaces. We used experimental and computational approaches to investigate the disinfection efficacy of this device againstEscherichia coliandListeria innocua. Stainless steel, Copper metal, and a Copper polymer were used as solid substrates of varying roughness and hydrophobicity. Bacteria reductions of up to 6.9 log CFU were achieved at various locations relative to the UV-C source after 3 min of treatment (20–990 mJ/cm2cumulative fluence depending on the location). Inactivation kinetics was nonlinear and followed the Weibull model (0.77 ≤R2≤ 0.97). Optical ray tracing simulation was used to generate maps of spatial light distribution, which were then coupled with microbial inactivation kinetics to create spatial maps of inactivation. The modeling approach used accurately predicted microbial inactivation at various locations, with only small discrepancies (±8%) between predicted and experimental data. These findings demonstrate that the proposed device is suitable for disinfecting various hard to reach surfaces, with numerous possible applications in the food and healthcare industries. Additionally, the modeling approach used here can be used to aid in the design of a highly effective Ultraviolet treatment system. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email