An official website of the United States government
Abstract Scintillators, one of the essential components in medical imaging and security checking devices, rely heavily on rare‐earth‐containing inorganic materials. Here, a new type of organic‐inorganic hybrid scintillators containing earth abundant elements that can be prepared via low‐temperature processes is reported. With room temperature co‐crystallization of an aggregation‐induced emission (AIE) organic halide, 4‐(4‐(diphenylamino) phenyl)‐1‐(propyl)‐pyrindin‐1ium bromide (TPA‐PBr), and a metal halide, zinc bromide (ZnBr2), a zero‐dimensional (0D) organic metal halide hybrid (TPA‐P)2ZnBr4with a yellowish‐green emission peaked at 550 nm has been developed. In this hybrid material, dramatically enhanced X‐ray scintillation of TPA‐P+is achieved via the sensitization by ZnBr42−. The absolute light yield (14,700 ± 800 Photons/MeV) of (TPA‐P)2ZnBr4is found to be higher than that of anthracene (≈13,500 Photons/MeV), a well‐known organic scintillator, while its X‐ray absorption is comparable to those of inorganic scintillators. With TPA‐P+as an emitting center, short photoluminescence and radioluminescence decay lifetimes of 3.56 and 9.96 ns have been achieved. Taking the advantages of high X‐ray absorption of metal halides and efficient radioluminescence with short decay lifetimes of organic cations, the material design paves a new pathway to address the issues of low X‐ray absorption of organic scintillators and long decay lifetimes of inorganic scintillators simultaneously.
more »
« less
(C 7 H 11 N 2 ) 2 MBr 4 (M=Cu, Zn): X‐Ray Sensitive 0D Hybrid Metal Halides with Tunable Broadband Emission
Abstract Herein, a new family of hybrid metal halides, (DMAP)2MBr4(M = Cu, Zn), featuring zero‐dimensional (0D), pseudo‐layered crystal structures containing isolated molecular 4‐dimethylaminopyridinium (DMAP, C7H11N2+) cations and MBr42−tetrahedral anions are reported. (DMAP)2MBr4show remarkable long‐term stability, with no signs of degradation after one year of ambient air exposure. The reported solution synthesis affords large crystals measuring up to 1 cm, which showed significant response to soft 8 keV X‐ray photons when implemented into X‐ray detectors. Furthermore, (DMAP)2ZnBr4demonstrates tunable color light emission properties, which is attributed to the organic molecular units based on our combined experimental and computational results. The measured photoluminescence quantum yield (PLQY) for (DMAP)2ZnBr4is 7.35 %, a remarkable enhancement of emission efficiency as compared to a weak emission from the organic precursor. The inexpensive and earth‐abundant chemical compositions and ease of preparation of the new hybrid metal halides make them promising candidates for optical and electronic applications.
more »
« less
- Award ID(s):
- 2045490
- PAR ID:
- 10446958
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- European Journal of Inorganic Chemistry
- Volume:
- 2022
- Issue:
- 10
- ISSN:
- 1434-1948
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Zero‐dimensional (0D) organic metal halide hybrids (OMHHs) are emerging materials with significant potential for optoelectronic applications, including direct X‐ray detectors. While 0D OMHH single crystals exhibit excellent X‐ray detection properties, their scalability remains a significant challenge due to the time‐intensive growth process and difficulty in producing large single crystals exceeding a few centimeters. This limitation hinders their practicality for large‐area detector applications. Here, we report for the first time the development of amorphous 0D OMHH films via solution processing for efficient direct X‐ray detection. By reacting a non‐crystalline organic halide, triphenyl(9‐phenyl‐9H‐carbazol‐3‐yl)phosphonium bromide (TPPCarzBr), with zinc bromide (ZnBr2), we have successfully produced amorphous 0D (TPPCarz)2ZnBr4films with controlled thickness via facile solution processing. The organic cations (TPPCarz⁺) feature a lower bandgap than the ZnBr42−anions, enabling efficient molecular sensitization, where ZnBr42−anions serve as X‐ray absorbers and TPPCarz⁺ cations as charge transporters. Direct X‐ray detectors based on 0D (TPPCarz)2ZnBr4films demonstrate outstanding performance, achieving a stable X‐ray detection sensitivity of 2,165 µC Gyair⁻1cm⁻2at 20 V mm⁻¹ and a detection limit of 6.01 nGyair s⁻¹. The amorphous nature of these films enhances their processability, allowing for fabrication in various sizes and shapes, and making them highly adaptable for scalable detector applications.more » « less
-
Abstract All‐inorganic metal halides such as Cs4PbX6and CsPbX3(X = Cl, Br, and I) are attracting global attention owing to their promise in optoelectronic applications. However, the presence of the toxic heavy metal lead (Pb) in these materials is a major concern. Here, a family of nontoxic high‐efficiency blue‐emitting all‐inorganic halides Rb2CuX3(X = Br and Cl) is reported; the compounds exhibit 1D crystal structures featuring anionic2−ribbons separated by Rb+cations. The measured record high photoluminescence quantum yield values range from 64% to 100% for Rb2CuBr3and Rb2CuCl3, respectively. Furthermore, the measured emission linewidths are quite narrow with full width at half maximum values of 54 and 52 nm for Rb2CuBr3and Rb2CuCl3, respectively. Single crystals of Rb2CuCl3demonstrate an anti‐Stokes photoluminescence signal, shown for the first time for Pb‐free metal halides. The discovery of highly efficient narrow blue emitters based on a nontoxic and inexpensive metal copper paves a way for the consideration of low‐cost and environmentally friendly copper halides for practical applications.more » « less
-
Abstract The photophysical tuning is reported for a series of tetraphenylphosphonium (TPP) metal halide hybrids containing distinct metal halides, TPP2MXn(MXn=SbCl5, MnCl4, ZnCl4, ZnCl2Br2, ZnBr4), from efficient phosphorescence to ultralong afterglow. The afterglow properties of TPP+cations could be suspended for the hybrids containing low band gap emissive metal halide species, such as SbCl52−and MnCl42−, but significantly enhanced for the hybrids containing wide band gap non‐emissive ZnCl42−. Structural and photophysical studies reveal that the enhanced afterglow is attributed to stronger π–π stacking and intermolecular electronic coupling between TPP+cations in TPP2ZnCl4than in the pristine organic ionic compound TPPCl. Moreover, the afterglow in TPP2ZnX4can be tuned by controlling the halide composition, with the change from Cl to Br resulting in a shorter afterglow due to the heavy atom effect.more » « less
-
Abstract Scintillation based X-ray detection has received great attention for its application in a wide range of areas from security to healthcare. Here, we report highly efficient X-ray scintillators with state-of-the-art performance based on an organic metal halide, ethylenebis-triphenylphosphonium manganese (II) bromide ((C38H34P2)MnBr4), which can be prepared using a facile solution growth method at room temperature to form inch sized single crystals. This zero-dimensional organic metal halide hybrid exhibits green emission peaked at 517 nm with a photoluminescence quantum efficiency of ~ 95%. Its X-ray scintillation properties are characterized with an excellent linear response to X-ray dose rate, a high light yield of ~ 80,000 photon MeV−1, and a low detection limit of 72.8 nGy s−1. X-ray imaging tests show that scintillators based on (C38H34P2)MnBr4powders provide an excellent visualization tool for X-ray radiography, and high resolution flexible scintillators can be fabricated by blending (C38H34P2)MnBr4powders with polydimethylsiloxane.more » « less
