An official website of the United States government
Perovskite light-emitting diodes (PeLEDs) are advancing because of their superior external quantum efficiencies (EQEs) and color purity. Still, addi-tional work is needed for blue PeLEDs to achieve the same benchmarks as the other visible colors. This study demonstrates an extremely efficient blue PeLED with a 488 nm peak emission, a maximum luminance of 8600 cd m−2, and a maximum EQE of 12.2% by incorporating the double-sided ethane-1,2-diammonium bromide (EDBr2) ligand salt along with the long-chain ligand methylphenylammonium chloride (MeCl). The EDBr2 successfully improves the interaction between 2D perovskite layers by reducing the weak van der Waals interaction and creating a Dion–Jacobson (DJ) structure. Whereas the pristine sample (without EDBr2) is inhibited by small stacking number (n) 2D phases with nonradiative recombination regions that diminish the PeLED performance, adding EDBr2 successfully enables better energy transfer from small n phases to larger n phases. As evidenced by photoluminescence (PL), scanning electron microscopy (SEM), and atomic force microscopy (AFM) characterization, EDBr2 improves the morphology by reduction of pinholes and passivation of defects, subsequently improving the efficiencies and operational lifetimes of quasi-2D blue PeLEDs.
more »
« less
Reduced Energetic Disorders in Dion–Jacobson Perovskites for Efficient and Spectral Stable Blue LEDs
Abstract Metal halide perovskites have witnessed great success in green, red, and near‐infrared light‐emitting diodes (LEDs), yet blue LEDs still lag behind. Reducing undesired energetic disorders – broad n ‐phases and halide segregation – is considered as the most critical strategy to further improve the performances. Here, the study reports a newly designed and synthesized di‐ammonium ligand with rigid π ‐conjugated rings and additional methyl groups to construct Dion–Jacobson (DJ) structure. Augmented coordination from the extra ammonium site and increased effective bulkiness from methyl groups lead to better distribution control over conventional mono‐ammonium ligands. This enhances the radiative recombination of blue emissions in the film with homogeneous energy landscape and improved surface morphology, as evidenced by a series of imaging and mapping techniques. As a result, it demonstrates DJ perovskite LEDs (PeLEDs) with peak external quantum efficiencies of ≈4% at 484 nm and ≈11% at 494 nm, which are among the top reported for pure DJ phase‐based PeLEDs in the corresponding wavelength regions. The results deepen the understanding of regulating energetic disorders in perovskite materials via molecular engineering.
more »
« less
- PAR ID:
- 10447122
- Date Published:
- Journal Name:
- Advanced Optical Materials
- ISSN:
- 2195-1071
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Layered halide perovskites have garnered significant interest due to their exceptional optoelectronic properties and great promises in light‐emitting applications. Achieving high‐performance perovskite light‐emitting diodes (PeLEDs) requires a deep understanding of exciton dynamics in these materials. This review begins with a fundamental overview of the structural and photophysical properties of layered halide perovskites, then delves into the importance of dimensionality control and cascade energy transfer in quasi‐2D PeLEDs. In the second half of the review, more complex exciton dynamics, such as multiexciton processes and triplet exciton dynamics, from the perspective of LEDs are explored. Through this comprehensive review, an in‐depth understanding of the critical aspects of exciton dynamics in layered halide perovskites and their impacts on future research and technological advancements for layered halide PeLEDs is provided.more » « less
-
Despite the impressive development of perovskite light-emitting diodes (PeLEDs), it is still challenging to achieve high-efficiency deep-blue PeLEDs using colloid perovskite quantum dots (PQDs). The efficiency of PQDs with a wavelength below 460 nm, which meets the requirements for deep-blue emission in the Telecommunication Union UHD television standard (ITU REC. 2020), lags far behind those of their sky-blue counterparts. To address this issue, a novel strategy of fast anion-exchange & cation-doping inter-promotion (FAECDIP) is proposed to achieve highly efficient deep-blue PQDs by introducing CaBr2 into the CsPbCl3 PQDs. Owing to the presence of Ca2+, the speed of ion exchange is increased, driven by the smaller cation, Ca2+, improving the preparation efficiency. Additionally, Ca2+ was doped on the surface of PQDs. Based on studies of fast anion-exchange and theoretical calculations, Ca2+ improves the optical performance by decreasing the number of traps and increasing the crystallinity of target PQDs, facilitating the stability of treated films and PeLEDs by enhancing the formation energy of halogen vacancies. Here, a high PLQY of 80.3 % CaBr2-induced CsPb(Cl/Br)3 deep-blue PQDs (~446 nm) was achieved. The correspondent PeLEDs (~447 nm) achieved a superior EQE of 5.88 %, which is the state-of-the-art among the reported deep-blue PeLEDs. Our strategy provides a potential route to achieve deep-blue PeLEDs, which differs from the previous tedious-complex methods.more » « less
-
Abstract Metal halide perovskites and perovskite‐related organic metal halide hybrids (OMHHs) have recently emerged as a new class of luminescent materials for light emitting diodes (LEDs), owing to their unique and remarkable properties, including near‐unity photoluminescence quantum efficiencies, highly tunable emission colors, and low temperature solution processing. While substantial progress has been made in developing monochromatic LEDs with electroluminescence across blue, green, red, and near‐infrared regions, achieving highly efficient and stable white electroluminescence from a single LED remains a challenging and under‐explored area. Here, a facile approach to generating white electroluminescence is reported by combining narrow sky‐blue emission from metal halide perovskites and broadband orange/red emission from zero‐dimensional (0D) OMHHs. For the proof of concept, utilizing TPPcarz+passivated two‐dimensional (2D) CsPbBr3nanoplatelets (NPLs) as sky blue emitter and 0D TPPcarzSbBr4as orange/red emitter (TPPcarz+= triphenyl (9‐phenyl‐9H‐carbazol‐3‐yl) phosphonium), white LEDs (WLEDs) with a solution processed bilayer structure have been fabricated to exhibit a peak external quantum efficiency (EQE) of 4.8% and luminance of 1507 cd m−2at the Commission Internationale de L'Eclairage (CIE) coordinate of (0.32, 0.35). This work opens a new pathway for creating highly efficient and stable WLEDs using metal halide perovskites and related materials.more » « less
-
Light emitting diodes (LEDs) have wide applications from fullcolor displays to solid‐state lighting. Numerous types of luminescent materials have been explored for LEDs, ranging from inorganic semiconductors to metal complexes and quantum dots. Despite the rapid pace of development, LEDs have not achieved their full potentials in terms of performance and cost efficiency. Identifying new eco‐friendly materials for LEDs is of great interest. Recently, metal halide perovskites and perovskite‐related hybrid materials have emerged as new generation luminescent materials with unique optoelectronic properties. Here, some of our recent development of LEDs based on metal halide perovskites and perovskite‐related materials will be discussed.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript
- Journal Article:
- https://doi.org/10.1002/adom.202301164
