skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • Contrasting the characteristics of atmospheric pressure plasma jets operated with single and double dielectric material: physicochemical characteristics and application to bacterial killing
Title: Contrasting the characteristics of atmospheric pressure plasma jets operated with single and double dielectric material: physicochemical characteristics and application to bacterial killing
Abstract This study reports an experimental comparison of two types of atmospheric pressure plasma jets in terms of their fundamental plasma characteristics and efficacy in bacterial sterilization. The plasma jets are fabricated by inserting a high voltage electrode inside a one-end closed (double DBD plasma jet) or both ends open (single DBD plasma jet) quartz tubes which are further enclosed inside a second quartz tube containing a ground electrode. Both plasma jets are operated in contact with water surface by using a unipolar pulsed DC power supply with helium as the working gas. Results from electrical and time-resolved imaging show that the single DBD configuration induces 3–4 times higher accumulation of charges onto the water surface with significantly faster propagation of plasma bullets. These results are accompanied by the higher discharge intensity as well as stronger emissions from short-lived reactive species which were analyzed through optical emission spectroscopy at the plasma-water interface. The rotational temperature for the single DBD configuration was observed to be higher making it unsafe for direct treatments of sensitive biological targets. These characteristics of the single DBD configuration result in the production of more than two times higher concentration of H 2 O 2 in plasma activated water. Shielding of the HV electrode reduces the plasma potential which in turn reduces the electric field & electron energy at the plasma-water interface. The reduced electric field for the double DBD configuration was lower by ≈463 Td than the single DBD configuration. The bactericidal efficacy of the two configurations of the plasma jets were tested against Escherichia coli , a well studied Gram-negative bacterium that can be commensal and pathogenic in human body. Our results demonstrate that although single DBD plasma jet result in stronger antibacterial effects, the double DBD configuration could be safer.  more » « less
Award ID(s):
1655280 2148653
PAR ID:
10448567
Author(s) / Creator(s):
; ; ; ;
Date Published:
Journal Name:
Journal of Physics D: Applied Physics
Volume:
56
Issue:
8
ISSN:
0022-3727
Page Range / eLocation ID:
085205
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; (, Journal of Applied Physics)
    Plasma-based water purification involves the transport of reactive species across the gas–liquid interface. This process is limited by slow diffusion driven mass transport of reactive species across the interface. Additionally, the plasma gas–liquid contact area is typically limited, contributing to reduced dose delivery. These key factors make it difficult to scale up the treatment process to input flows of industrial interest. In this work, turbulence is explored as a means to introduce a fine grain structure, thus greatly increasing the interfacial surface area, leading to large property gradients and more efficient mass transport. Such a fine scale structure can also enhance the local electric field. The test apparatus explored in this work is the packed bed reactor that places thin water jets into contact with plasma. It is theorized that introducing turbulence, via increasing Reynolds number in such thin jets, may enhance the effective plasma dose at fixed plasma power. In this work, changes in the flow regime, from laminar to turbulent, of water jets in a packed bed water reactor (PBR) configuration are investigated experimentally. Methylene blue dye, a model contaminant, was tested in the PBR to demonstrate enhanced treatment via reduced treatment times. Plasma surface morphology around the jets noticeably changed with the flow regime, and turbulent flow demonstrated a faster hydrogen peroxide uptake, along with slower temperature, electrical conductivity, and a pH change in a batch treatment process, compared to laminar flow. The dye was destroyed significantly faster in the turbulent flow, indicating an increased effective plasma dose. 
    more » « less
  2. ; ; ; (, ASME (IGTI) Turbo Expo)
    A novel, double hole film cooling configuration is investigated as an alternative to traditional cylindrical and fanshaped, laidback holes. This experimental investigation utilizes a Stereo-Particle Image Velocimetry (S-PIV) to quantitatively assess the ability of the proposed, double hole geometry to weaken or mitigate the counter-rotating vortices formed within the jet structure. The three-dimensional flow field measurements are combined with surface film cooling effectiveness measurements obtained using Pressure Sensitive Paint (PSP). The double hole geometry consists of two compound angle holes. The inclination of each hole is  = 35°, and the compound angle of the holes is  = ± 45° (with the holes angled toward one another). The simple angle cylindrical and shaped holes both have an inclination angle of  = 35°. The blowing ratio is varied from M = 0.5 to 1.5 for all three film cooling geometries while the density ratio is maintained at DR = 1.0. Time averaged velocity distributions are obtained for both the mainstream and coolant flows at five streamwise planes across the fluid domain (x/d = -4, 0, 1, 5, and 10). These transverse velocity distributions are combined with the detailed film cooling effectiveness distributions on the surface to evaluate the proposed double hole configuration (compared to the traditional hole designs). The fanshaped, laidback geometry effectively reduces the strength of the kidney-shaped vortices within the structure of the jet (over the entire range of blowing ratios considered). The three-dimensional velocity field measurements indicate the secondary flows formed from the double hole geometry strengthen in the plane perpendicular to the mainstream flow. At the exit of the double hole geometry, the streamwise momentum of the jets is reduced (compared to the single, cylindrical hole), and the geometry offers improved film cooling coverage. However, moving downstream in the steamwise direction, the two jets form a single jet, and the counter-rotating vortices are comparable to those formed within the jet from a single, cylindrical hole. These strong secondary flows lift the coolant off the surface, and the film cooling coverage offered by the double hole geometry is reduced. 
    more » « less
  3. ; ; (, Energy Technology)
    Dielectric barrier discharge (DBD) plasma is a promising technology for catalysis due to its low‐temperature operation, cost‐effectiveness, and silent operation. This review comprehensively analyzes the design and operational parameters of DBD plasma reactors for three key catalytic applications: CH4conversion, CO2splitting, and dry reforming of methane (DRM). While catalyst selection is crucial for achieving desired product selectivity, reactor design and reaction parameters such as discharge power, electrode gap, reactor length, frequency, dielectric material thickness, and feed gas flow rate, significantly influence discharge characteristics and reaction mechanisms. This review also explores the influence of less prominent factors, such as electrode shape and applied voltage waveforms. Additionally, this review addresses the challenges of DBD plasma catalysis, including heat loss, temperature effects on discharge characteristics, and strategies for enhancing overall efficiency. 
    more » « less
  4. ; ; ; (, Plasma Sources Science and Technology)
    Abstract The electric field distribution in the ionization waves propagating over a microchannel array dielectric surface, with the channels either empty or filled with distilled water, is measured by ps Electric Field Induced Second Harmonic (EFISH) generation. The surface ionization wave is initiated by the atmospheric pressure N2-Ar plasma jet impinging on the surface vertically and powered by ns pulse discharge bursts. The results show that the electric field inside the microchannels, specifically its horizontal component, is enhanced by up to a factor of 2. The field enhancement region is localized within the channels. The vertical electric field inside the channels lags in time compared to the field measured at the ridges, indicating the transient reversal of the ionization wave propagation direction across the channels (toward the jet). This is consistent with the phase-locked plasma emission images and confirmed by the kinetic modeling predictions, which show that the ionization wave “jumps” over the empty channels and propagates into the channels only after the jump between the adjacent ridges. When the channels are filled with water, the wave speed increases by up to 50%, due to the higher effective dielectric constant of the surface. No evidence of a significant electric field enhancement near the dielectric surface (ceramic or water) has been detected, within the spatial resolution of the present diagnostic, ~100 μm. 
    more » « less
  5. ; ; (, Journal of Climate)
    Abstract The relationship of upper tropospheric jet variability to El Niño / Southern Oscillation (ENSO) in reanalysis datasets is analyzed for 1979–2018, revealing robust regional and seasonal variability. Tropical jets associated with monsoons and the Walker circulation are weaker and the zonal mean subtropical jet shifts equatorward in both hemispheres during El Niño, consistent with previous findings. Regional and seasonal variations are analyzed separately for subtropical and polar jets. The subtropical jet shifts poleward during El Niño over the NH eastern Pacific in DJF, and in some SH regions in MAMand SON. Subtropical jet altitudes increase during El Niño, with significant changes in the zonal mean in the NH and during summer/fall in the SH. Though zonal mean polar jet correlations with ENSO are rarely significant, robust regional/seasonal changes occur: The SH polar jet shifts equatorward during El Niño over Asia and the western Pacific in DJF, and poleward over the eastern Pacific in JJA and SON. Polar jets are weaker (stronger) during El Niño in the western (eastern) hemisphere, especially in the SH; conversely, subtropical jets are stronger (weaker) in the western (eastern) hemisphere during El Niño in winter and spring; these opposing changes, along with an anticorrelation between subtropical and polar jet windspeed, reinforce subtropical/polar jet strength differences during El Niño, and suggest ENSO-related covariability of the jets. ENSO-related jet latitude, altitude, and windspeed changes can reach 4(3)°, 0.6(0.3) km, and 6(3) ms −1 , respectively, for the subtropical (polar) jets. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email