Titanium nitride (TiN) is presented as an alternative plasmonic nanomaterial to the commonly used gold (Au) for its potential use in laser rewarming of cryopreserved biomaterials. The rewarming of vitrified, glass like state, cryopreserved biomaterials is a delicate process as potential ice formation leads to mechanical stress and cracking on a macroscale, and damage to cell walls and DNA on a microscale, ultimately leading to the destruction of the biomaterial. The use of plasmonic nanomaterials dispersed in cryoprotective agent solutions to rapidly convert optical radiation into heat, generally supplied by a focused laser beam, proposes a novel approach to overcome this difficulty. This study focuses on the performance of TiN nanoparticles (NPs), since they present high thermal stability and are inexpensive compared to Au. To uniformly warm up the nanomaterial solutions, a beam splitting laser system was developed to heat samples from multiple sides with equal beam energy distribution. In addition, uniform laser warming requires equal distribution of absorption and scattering properties in the nanomaterials. Preliminary results demonstrated higher absorption but less scattering in TiN NPs than Au nanorods (GNRs). This led to the development of TiN clusters, synthetized by nanoparticle agglomeration, to increase the scattering cross-section of the material. Overall, this study analyzed the heating rate, thermal efficiency, and heating uniformity of TiN NPs and clusters in comparison to GNRs at different solution concentrations. TiN NPs and clusters demonstrated higher heating rates and solution temperatures, while only clusters led to a significantly improved uniformity in heating. These results highlight a promising alternative plasmonic nanomaterial to rewarm cryopreserved biological systems in the future.
In this work, we present an extensive comparative study between novel titanium nitride nanoparticles (TiN NPs) and commercial gold nanorods (GNR), both dispersed in water and exposed to a pulsed laser‐induced cavitation process. The optical density, shockwave emission, and bubble formation of these solutions were investigated using shadowgraphy, spatial transmittance modulation, and acoustic measurements. TiN nanoparticle solutions exhibited high stability undser a periodic nanosecond pulsed‐laser irradiation, making these nanomaterials promising agents for high‐power applications. In addition, they demonstrated a stronger nonlinear absorption compared to the GNR solutions, and plasma formation at lower laser energies. This study advances our understanding of the optical properties of TiN and discusses significant differences compared to gold, with important implications for future applications of this material in water treatment, nonlinear signal converting, and laser‐induced cavitation for medical implementations, among others.
more » « less- Award ID(s):
- 1941543
- PAR ID:
- 10449018
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Journal of Biomedical Materials Research Part A
- Volume:
- 109
- Issue:
- 12
- ISSN:
- 1549-3296
- Page Range / eLocation ID:
- p. 2483-2492
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
-
more » « less
Abstract Titanium nitride nanoparticles have become a research interest due to their distinguished optical and photothermal properties. Furthermore, the search for nanoparticle solutions with tunable nonlinear optical properties for laser‐based applications is critical. More specifically, third order optical nonlinearities such as reverse saturable absorption, optical liming, and self‐focusing are important in the biomedical and electronics fields. The optical nonlinearities of titanium nitride plasmonic nanoparticles are investigated as a function of material concentration in water solutions. Furthermore, the effect of nanoparticle clustering on optical nonlinearities is investigated by fabricating micrometer‐sized clusters of ≈50 nm titanium nitride particles. These studies demonstrate that the nonlinear absorption coefficient increases linearly with concentration. However, clusters require higher concentrations compared to the freestanding nanoparticles to exhibit similar nonlinear absorption coefficient and optical density. Similarly, the optical limiting threshold for titanium nitride nanoparticles appears to be lower compared to the cluster solutions, which is impacted by the collective scattering of nanoparticles and high reverse saturable absorption. In addition, self‐focusing is observed in the continuous resonant regime. This study provides an in‐depth analysis of the nonlinear optical properties of titanium nitride, with relevant consequences for applications such as sensor protection and photothermal therapy.
-
more » « less
Abstract Nonlinear optical imaging modalities, such as stimulated Raman scattering (SRS) microscopy, use pulsed-laser excitation with high peak intensity that can perturb the native state of cells. In this study, we used bulk RNA sequencing, quantitative measurement of cell proliferation, and fluorescent measurement of the generation of reactive oxygen species to assess phototoxic effects of near-IR pulsed laser radiation, at different time scales, for laser excitation settings relevant to SRS imaging. We define a range of laser excitation settings for which there was no significant change in mouse Neuro2A cells after laser exposure. This study provides guidance for imaging parameters that minimize photo-induced perturbations in SRS microscopy to ensure accurate interpretation of experiments with time-lapse imaging or with paired measurements of imaging and sequencing on the same cells.
-
more » « less
Abstract The manipulation of magnetization through optically generated ultrafast spin currents is a fascinating area that needs a thorough understanding for its potential future applications. In this work, a comprehensive investigation of helicity‐driven optical spin‐orbit torque in heavy metal/ferromagnetic metal heterostructures is presented, specifically cobalt capped with gold or platinum, subject to laser pumping at different wavelengths. The results demonstrate up to tenfold enhancement in optical spin‐orbit torque quantum efficiency for gold compared to platinum of the same thickness when pumped with a visible laser. Additionally, the study provides the first experimental analysis of the photon energy dependence of optical spin‐orbit torque and derives the optical spin orientation spectra for both gold/cobalt and platinum/cobalt heterostructures. A key insight gained from the study is the impact of photon energy‐dependent spin transport in the system, which suggests the use of a high photon energy pump for efficient spin transport. These findings highlight the potential of spin current generation and manipulation in gold/ferromagnet heterostructures for a wide range of applications such as all‐optical magnetization switching, spin‐wave generation and control, and spintronic terahertz emission.
-
Femtosecond lasers, fired in short pulses, can induce bubble cavitation in single-phase liquid fluid inclusions at temperatures near the inclusion homogenization temperature. By coupling femtosecond laser-induced cavitation with microthermometry, paleotemperatures can be extracted from fluid inclusions in primary halite crystals. This technique minimizes plastic deformation of halite by not subjecting samples to extreme temperatures during vapor bubble nucleation. The resultant homogenization temperatures are precise and reproducible. We applied this technique to Eocene Green River Formation primary bottom-growth halites from the Piceance Creek Basin in Colorado. Samples from the basin-center Savage 24-1 core yield average bottom water temperatures of 27.0 ± 1.3 ºC and 20.1 ± 1.2 ºC for the Upper and Lower Salt intervals, respectively. Average bottom water temperatures from modern perennial hypersaline lakes have been shown to reflect the local mean annual air temperature. Therefore, homogenization temperatures from primary bottom-growth halite fluid inclusions are a proxy for mean annual air temperature. These results agree with regional Early Eocene mean annual air temperature estimate ranges from other mineralogical and biochemical proxies, bolstering the reliability of temperature estimates obtained using this technique. Additionally, the highly selective nature of laser induced cavitation microthermometry allows for a higher degree of quality control compared to standard microthermometry, yielding more reproducible and precise results.more » « less
