The drive to broaden equitable access to undergraduate research experiences has catalyzed the development and implementation of course‐based undergraduate research experiences (CUREs). Biology education has prioritized embedding CUREs in introductory labs, which are frequently taught by graduate teaching assistants (GTAs). Thus, a CURE GTA is expected not only to teach but also to support novice student researchers. We know little about how GTAs perform as research mentors in a CURE, or how the quality of their mentorship and support impacts undergraduate students. To address this gap in knowledge, we conducted a phenomenological study of an introductory biology CURE, interviewing 25 undergraduate students taught by nine different GTAs at a single institution. We used self‐determination theory to guide our exploration of how students' autonomous motivation to engage in a CURE is impacted by perceptions of GTA support. We found that highly motivated students were more likely to experience factors hypothesized to optimize motivation in the CURE, and to perceive that their GTA was highly supportive of these elements. Students with lower motivation were less likely to report engaging in fundamental elements of research offered in a CURE. Our findings suggest that GTAs directly impact students' motivation, which can, in turn, influence whether students perceive receiving the full research experience as intended in a CURE. We contend that practitioners who coordinate CUREs led by GTAs should therefore offer curated training that emphasizes supporting students' autonomous motivation in the course and engagement in the research. Our work suggests that GTAs may differ in their capacity to provide students with the support they need to receive and benefit from certain pedagogical practices. Future work assessing innovative approaches in undergraduate biology laboratory courses should continue to investigate potenital differential outcomes for students taught by GTAs.
The culturally responsive science teaching practices of undergraduate biology teaching assistants
Science as an enterprise has been and continues to be exclusionary, perpetuating inequities among whose voice is heard as well as what/whose knowledge is recognized as valid. Women, people of color, and persons with disabilities are still vastly outnumbered in science and engineering by their White, male counterparts. These types of imbalances create a gatekeeping culture of inequity and inaccessibility, particularly for traditionally underrepresented students. Science classrooms, especially at the undergraduate level, strive to mimic the broader practices of the scientific community and therefore have tremendous potential to perpetuate the exclusion of certain groups of people. They also have, however, the potential to be a catalyst for equitable participation in science. Utilizing pedagogies of empowerment such as culturally responsive science teaching (CRST) in undergraduate classrooms can mitigate the gatekeeping phenomenon seen in science. Teaching assistants (TAs) engage in more one‐on‐one time with students than most faculty in undergraduate biology education, yet minimal pedagogical training is offered to them. Therefore, training for improved pedagogical knowledge is important for TAs, but training for CRST is critical as TAs have broad and potentially lasting impact on students. This study explores the ways in which undergraduate biology TAs enact CRST. Using constructivist grounded theory methods, this study examined TAs' reflections, observation field notes, semistructured interviews, and focus groups to develop themes surrounding their enactment of CRST. Findings from this study showed that undergraduate biology TAs enact CRST in ways described by four themes:
- Award ID(s):
- 1712033
- NSF-PAR ID:
- 10449155
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Journal of Research in Science Teaching
- Volume:
- 58
- Issue:
- 9
- ISSN:
- 0022-4308
- Page Range / eLocation ID:
- p. 1320-1358
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract -
Objective: This study is aimed at understanding the ways in which faculty at community colleges utilize their industry experiences to inform their teaching. Method: The research drew on Merriam’s basic qualitative approach in analyzing data from 14 semi-structured qualitative interviews. Results: Our findings expand upon prior research surrounding faculty development and community college faculty experiences. Our analysis revealed several themes in regard to how community college faculty with industry backgrounds follow diverse pathways leading to their teaching positions; how they teach using practical applications of concepts and sharing real-life examples; how they utilize their industry networks to enhance their academic programs and create practical opportunities for students; how they replicate workplace settings in their classrooms; and how they prepare students for their future careers. Contribution: Our study contributes new empirical evidence on the myriad ways in which faculty apply industry experiences in their instruction. The findings indicate that community colleges would benefit from offering targeted supports and pedagogical training for faculty with an industry background; encouraging faculty from all backgrounds and disciplines to share successful teaching strategies; and utilizing faculty members’ expertise, networks, and experiences from industry in mathematics-oriented classrooms.more » « less
-
null (Ed.)As our nation’s need for engineering professionals grows, a sharp rise in P-12 engineering education programs and related research has taken place (Brophy, Klein, Portsmore, & Rogers, 2008; Purzer, Strobel, & Cardella, 2014). The associated research has focused primarily on students’ perceptions and motivations, teachers’ beliefs and knowledge, and curricula and program success. The existing research has expanded our understanding of new K-12 engineering curriculum development and teacher professional development efforts, but empirical data remain scarce on how racial and ethnic diversity of student population influences teaching methods, course content, and overall teachers’ experiences. In particular, Hynes et al. (2017) note in their systematic review of P-12 research that little attention has been paid to teachers’ experiences with respect to racially and ethnically diverse engineering classrooms. The growing attention and resources being committed to diversity and inclusion issues (Lichtenstein, Chen, Smith, & Maldonado, 2014; McKenna, Dalal, Anderson, & Ta, 2018; NRC, 2009) underscore the importance of understanding teachers’ experiences with complementary research-based recommendations for how to implement engineering curricula in racially diverse schools to engage all students. Our work examines the experiences of three high school teachers as they teach an introductory engineering course in geographically and distinctly different racially diverse schools across the nation. The study is situated in the context of a new high school level engineering education initiative called Engineering for Us All (E4USA). The National Science Foundation (NSF) funded initiative was launched in 2018 as a partnership among five universities across the nation to ‘demystify’ engineering for high school students and teachers. The program aims to create an all-inclusive high school level engineering course(s), a professional development platform, and a learning community to support student pathways to higher education institutions. An introductory engineering course was developed and professional development was provided to nine high school teachers to instruct and assess engineering learning during the first year of the project. This study investigates participating teachers’ implementation of the course in high schools across the nation to understand the extent to which their experiences vary as a function of student demographic (race, ethnicity, socioeconomic status) and resource level of the school itself. Analysis of these experiences was undertaken using a collective case-study approach (Creswell, 2013) involving in-depth analysis of a limited number of cases “to focus on fewer "subjects," but more "variables" within each subject” (Campbell & Ahrens, 1998, p. 541). This study will document distinct experiences of high school teachers as they teach the E4USA curriculum. Participants were purposively sampled for the cases in order to gather an information-rich data set (Creswell, 2013). The study focuses on three of the nine teachers participating in the first cohort to implement the E4USA curriculum. Teachers were purposefully selected because of the demographic makeup of their students. The participating teachers teach in Arizona, Maryland and Tennessee with predominantly Hispanic, African-American, and Caucasian student bodies, respectively. To better understand similarities and differences among teaching experiences of these teachers, a rich data set is collected consisting of: 1) semi-structured interviews with teachers at multiple stages during the academic year, 2) reflective journal entries shared by the teachers, and 3) multiple observations of classrooms. The interview data will be analyzed with an inductive approach outlined by Miles, Huberman, and Saldaña (2014). All teachers’ interview transcripts will be coded together to identify common themes across participants. Participants’ reflections will be analyzed similarly, seeking to characterize their experiences. Observation notes will be used to triangulate the findings. Descriptions for each case will be written emphasizing the aspects that relate to the identified themes. Finally, we will look for commonalities and differences across cases. The results section will describe the cases at the individual participant level followed by a cross-case analysis. This study takes into consideration how high school teachers’ experiences could be an important tool to gain insight into engineering education problems at the P-12 level. Each case will provide insights into how student body diversity impacts teachers’ pedagogy and experiences. The cases illustrate “multiple truths” (Arghode, 2012) with regard to high school level engineering teaching and embody diversity from the perspective of high school teachers. We will highlight themes across cases in the context of frameworks that represent teacher experience conceptualizing race, ethnicity, and diversity of students. We will also present salient features from each case that connect to potential recommendations for advancing P-12 engineering education efforts. These findings will impact how diversity support is practiced at the high school level and will demonstrate specific novel curricular and pedagogical approaches in engineering education to advance P-12 mentoring efforts.more » « less
-
In higher education, Learning Assistants (LAs)—a relatively recent evolution grounded in peer mentorship models—are gaining popularity in classrooms as universities strive to meet the needs of undergraduate learners. Unlike Teaching Assistants, LAs are undergraduate students who receive continuous training from faculty mentors in content-area coaching and pedagogical skills. As near-peers, they assist assigned groups of undergraduates (students) during class. Research on LAs suggests that they are significant in mitigating high Drop-Fail-Withdrawal rates of large enrollment undergraduate science, technology, engineering, mathematics, and medical (STEMM) courses. However, there is a dearth of description regarding the learning between LAs and STEMM faculty mentors. This paper reports on perspectives of faculty mentors and their cooperating LAs in regard to their learning relationships during a Calculus II at a research-oriented university during Spring of 2020. Using an exploratory-descriptive qualitative design, faculty (oral responses) and LAs (written responses) reflected on their relationship. Content analysis (coding) resulted in four salient categories (by faculty and LA percentages, respectively) in: Showing Care and Fostering Relationships (47%, 23%); Honing Pedagogical Skills (27%, 36%); Being Prepared for Class and Students (23%, 28%); and Developing Content Knowledge in Calculus (3%, 13%). Benefits of LAs to faculty and ways to commence LA programs at institutions are also discussed.more » « less
-
Major challenges in engineering education include retention of undergraduate engineering students (UESs) and continued engagement after the first year when concepts increase in difficulty. Additionally, employers, as well as ABET, look for students to demonstrate non-technical skills, including the ability to work successfully in groups, the ability to communicate both within and outside their discipline, and the ability to find information that will help them solve problems and contribute to lifelong learning. Teacher education is also facing challenges given the recent incorporation of engineering practices and core ideas into the Next Generation Science Standards (NGSS) and state level standards of learning. To help teachers meet these standards in their classrooms, education courses for preservice teachers (PSTs) must provide resources and opportunities to increase science and engineering knowledge, and the associated pedagogies. To address these challenges, Ed+gineering, an NSF-funded multidisciplinary collaborative service learning project, was implemented into two sets of paired-classes in engineering and education: a 100 level mechanical engineering class (n = 42) and a foundations class in education (n = 17), and a fluid mechanics class in mechanical engineering technology (n = 23) and a science methods class (n = 15). The paired classes collaborated in multidisciplinary teams of 5-8 undergraduate students to plan and teach engineering lessons to local elementary school students. Teams completed a series of previously tested, scaffolded activities to guide their collaboration. Designing and delivering lessons engaged university students in collaborative processes that promoted social learning, including researching and planning, peer mentoring, teaching and receiving feedback, and reflecting and revising their engineering lesson. The research questions examined in this pilot, mixed-methods research study include: (1) How did PSTs’ Ed+gineering experiences influence their engineering and science knowledge?; (2) How did PSTs’ and UESs’ Ed+gineering experiences influence their pedagogical understanding?; and (3) What were PSTs’ and UESs’ overall perceptions of their Ed+gineering experiences? Both quantitative (e.g., Engineering Design Process assessment, Science Content Knowledge assessment) and qualitative (student reflections) data were used to assess knowledge gains and project perceptions following the semester-long intervention. Findings suggest that the PSTs were more aware and comfortable with the engineering field following lesson development and delivery, and often better able to explain particular science/engineering concepts. Both PSTs and UESs, but especially the latter, came to realize the importance of planning and preparing lessons to be taught to an audience. UESs reported greater appreciation for the work of educators. PSTs and UESs expressed how they learned to work in groups with multidisciplinary members—this is a valuable lesson for their respective professional careers. Yearly, the Ed+gineering research team will also request and review student retention reports in their respective programs to assess project impact.more » « less
