skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Elucidating the Role of Water‐Related Traps in the Operation of Polymer Field‐Effect Transistors
Abstract Conjugated polymers have gained momentum as serious contenders for next‐generation flexible electronics, but their susceptibility to water represents a major problem. Atmospheric water is ubiquitous and its inadvertent diffusion into polymeric devices generates charge carrier traps, reducing their performance and stability. A good understanding of the physical processes associated with the presence of water is therefore necessary in order to be able to suppress the related trapping events and enable stable, high‐performance devices. Here, evidence is shown that water introduces traps in the bandgap of organic semiconductors and the impact of these traps on the electrical properties of polymer organic field‐effect transistors (OFETs) based on indacenodithiophene‐co‐benzothiadiazole (IDT‐BT) is investigated. Monitoring device parameters and the trap density of states (t‐DOS) during moisture extrication reveals the existence of two types of water‐related traps: shallow traps originating from water inhabiting the voids of the polymer film and deeper traps arising from chemisorbed water present at the dielectric/polymer interface. A trap passivation method based on flame‐annealing is introduced to eliminate the interfacial traps. As a result, stable OFETs, with threshold voltage shifts less than ΔVth = −0.3 V and constant mobilities (<10% variation) after three months of storage, are fabricated.  more » « less
Award ID(s):
1810273
PAR ID:
10450152
Author(s) / Creator(s):
 ;  ;  ;  ;  
Publisher / Repository:
Wiley Blackwell (John Wiley & Sons)
Date Published:
Journal Name:
Advanced Electronic Materials
Volume:
7
Issue:
9
ISSN:
2199-160X
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; (, Journal of Materials Chemistry C)
    null (Ed.)
    The improvement of conjugated polymer-based gas sensors involves fine tuning the backbone electronic structure and solid-state microstructure to combine high stability and sensitivity. We had previously developed a series of diketopyrrolopyrrole (DPP)-based polymer semiconductors by introducing a variety of fluorene linkers to study the trends and mechanisms governing gas sensitivities and electronic stability in air and under gate and drain bias stress. The proportional on-current change of organic field-effect transistors (OFETs) using a dithienyl DPP–fluorene polymer reached ∼600% for a sequential exposure from 0.5–20 ppm of NO 2 for 5 minutes and also a high response-to-drift ratio under dynamic bias stress. In the present work we specify the roles of static bias stress and traps in the sensing process for the first time. Apart from electronic structure, defects at the molecular and microstructural levels govern the ability to form and sustain traps and subsequent backbone dopability. A polymer with a twisted backbone was observed to be capable of creating an energetically broad trap distribution while a polymer with a high degree of solid-state order shows a tendency to form an energetically narrow trap distribution and a fast passivation of traps on exposure to air. The stability and energetic distribution of traps on subjecting the polymers to bias stress was related to electronic structure and solid-state packing; and the ability of NO 2 and NH 3 to fill/create traps further was evaluated. At a bias stress condition of V G = V D = −80 V, the polymers retain their NO 2 sensitivity both post NO 2 -aided recovery and air-aided recovery. In order to verify the ability of NH 3 to create traps, traps were erased from the OFET sensors by charging with the aid of a positive gate voltage leading to an increase in the NH 3 response when compared to air controls. This work demonstrates that the charge-trap filling and generation response mechanism is predominant and can even be leveraged for higher responses to vapors. Backbone dopability appears to be a minor contributor to responses in this category of polymeric semiconductors with engineered defects. Finally, bias stress generally does not preclude this category of OFET vapor sensors from recovering their original sensitivities. 
    more » « less
  2. ; ; ; ; ; ; ; ; (, Advanced Electronic Materials)
    Abstract Faux‐hawk fullerenes are promising candidates for high‐performance organic field‐effect transistors (OFETs). They show dense molecular packing and high thermal stability. Furthermore, in contrast to most other C60derivates, functionalization of the fullerene core by the fluorinated group C6F4CF2does not increase their lowest unoccupied orbital position, which allows the use of air‐stable molecular n‐dopants to optimize their performance. The influence of n‐doping on the performance of OFETs based on the faux‐hawk fullerene 1,9‐C60(cyclo‐CF2(2‐C6F4)) (C60FHF) is studied. An analytic model for n‐doped transistors is presented and used to clarify the origin of the increase in the subthreshold swing usually observed in doped OFETs. It is shown that the increase in subthreshold swing can be minimized by using a bulk dopant layer at the gate dielectric/C60FHF layer instead of a mixed host:dopant layer. Following an optimization of the OFETs, an average electron mobility of 0.34 cm2 V−1 s−1, a subthreshold swing below 400 mV dec−1for doped transistors, and a contact resistance of 10 kΩ cm is obtained, which is among the best performance for fullerene based n‐type semiconductors. 
    more » « less
  3. ; ; ; ; ; ; ; ; ; ; et al (, Advanced Materials)
    Abstract Organic electrochemical transistors (OECTs) hold promise for developing a variety of high‐performance (bio‐)electronic devices/circuits. While OECTs based on p‐type semiconductors have achieved tremendous progress in recent years, n‐type OECTs still suffer from low performance, hampering the development of power‐efficient electronics. Here, it is demonstrated that fine‐tuning the molecular weight of the rigid, ladder‐type n‐type polymer poly(benzimidazobenzophenanthroline) (BBL) by only one order of magnitude (from 4.9 to 51 kDa) enables the development of n‐type OECTs with record‐high geometry‐normalized transconductance (gm,norm ≈ 11 S cm−1) and electron mobility × volumetric capacitance (µC* ≈ 26 F cm−1 V−1s−1), fast temporal response (0.38 ms), and low threshold voltage (0.15 V). This enhancement in OECT performance is ascribed to a more efficient intermolecular charge transport in high‐molecular‐weight BBL than in the low‐molecular‐weight counterpart. OECT‐based complementary inverters are also demonstrated with record‐high voltage gains of up to 100 V V−1and ultralow power consumption down to 0.32 nW, depending on the supply voltage. These devices are among the best sub‐1 V complementary inverters reported to date. These findings demonstrate the importance of molecular weight in optimizing the OECT performance of rigid organic mixed ionic–electronic conductors and open for a new generation of power‐efficient organic (bio‐)electronic devices. 
    more » « less
  4. ; ; ; ; (, Advanced Optical Materials)
    Abstract Organic doping is widely used for defining the majority charge carriers of organic thin films, tuning the Fermi level, and improving and stabilizing the performance of organic light‐emitting diodes and organic solar cells. However, in contrast to inorganic semiconductors, the doping concentrations commonly used are quite high (in the wt% range). Such high concentrations not only limit the scope of doping in organic field‐effect transistors (OFETs), but also limit the doping process itself resulting in a low doping efficiency. Here, the mechanism of doping at ultralow doping concentrations is studied. Doped C60metal‐oxide‐semiconductor (MOS) junctions are used to study doping at the 100 ppm level. With the help of a small‐signal drift‐diffusion model, it is possible to disentangle effects of traps at the gate dielectric/organic semiconductor interface from effects of doping and to determine the doping efficiency and activation energy of the doping process. Doped C60OFETs with an ultralow operation voltage of 800 mV and an excellent on/off ratio of up to 107are realized. The devices have low subthreshold swing in the range of 80 mV dec−1and a large transconductance of up to 8 mS mm−1. 
    more » « less
  5. ; ; (, Journal of Materials Chemistry C)
    The weak intermolecular interactions inherent in organic semiconductors make them susceptible to defect formation, resulting in localized states in the band-gap that can trap charge carriers at different timescales. Charge carrier trapping is thus ubiquitous in organic semiconductors and can have a profound impact on their performance when incorporated into optoelectronic devices. This review provides a comprehensive overview on the phenomenon of charge carrier trapping in organic semiconductors, with emphasis on the underlying physical processes and its impact on device operation. We first define the concept of charge carrier trap, then outline and categorize different origins of traps. Next, we discuss their impact on the mechanism of charge transport and the performance of electronic devices. Progress in the filed in terms of characterization and detection of charge carrier traps is reviewed together with insights on future direction of research. Finally, a discussion on the exploitation of traps in memory and sensing applications is provided. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email