skip to main content


Title: Wintertime Formaldehyde: Airborne Observations and Source Apportionment Over the Eastern United States
Abstract

Formaldehyde (HCHO) is generated from direct urban emission sources and secondary production from the photochemical reactions of urban smog. HCHO is linked to tropospheric ozone formation, and contributes to the photochemical reactions of other components of urban smog. In this study, pollution plume intercepts during the Wintertime INvestigation of Transport, Emissions, and Reactivity (WINTER) campaign were used to investigate and characterize the formation of HCHO in relation to several anthropogenic tracers. Analysis of aircraft intercepts combined with detailed chemical box modeling downwind of several cities suggests that the most important contribution to observed HCHO was primary emission. A box model analysis of a single plume suggested that secondary sources contribute to 21 ± 10% of the observed HCHO. Ratios of HCHO/CO observed in the northeast US, from Ohio to New York, ranging from 0.2% to 0.6%, are consistent with direct emissions combined with at most modest photochemical production. Analysis of the nocturnal boundary layer and residual layer from repeated vertical profiling over urban influenced areas indicate a direct HCHO emission flux of 1.3 × 1014molecules cm−2h−1. In a case study in Atlanta, GA, nighttime HCHO exhibited a ratio to CO (0.6%–1.8%) and was anti‐correlated with O3. Observations were consistent with mixing between direct HCHO emissions in urban air masses with those influenced by more rapid HCHO photochemical production. The HCHO/CO emissions ratios determined from the measured data are 2.3–15 times greater than the NEI 2017 emissions database. The largest observed HCHO/CO was 1.7%–1.8%, located near co‐generating power stations.

 
more » « less
Award ID(s):
1901786
NSF-PAR ID:
10450183
Author(s) / Creator(s):
 ;  ;  ;  ;  ;  ;  ;  ;  ;  ;  ;  ;  
Publisher / Repository:
DOI PREFIX: 10.1029
Date Published:
Journal Name:
Journal of Geophysical Research: Atmospheres
Volume:
126
Issue:
5
ISSN:
2169-897X
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. We use a 0-D photochemical box model and a 3-D global chemistry-climate model, combined with observations from the NOAA Southeast Nexus (SENEX) aircraft campaign, to understand the sources and sinks of glyoxal over the Southeast United States. Box model simulations suggest a large difference in glyoxal production among three isoprene oxidation mechanisms (AM3ST, AM3B, and MCM v3.3.1). These mechanisms are then implemented into a 3-D global chemistry-climate model. Comparison with field observations shows that the average vertical profile of glyoxal is best reproduced by AM3ST with an effective reactive uptake coefficient γglyx of 2 × 10-3, and AM3B without heterogeneous loss of glyoxal. The two mechanisms lead to 0-0.8 µg m-3 secondary organic aerosol (SOA) from glyoxal in the boundary layer of the Southeast U.S. in summer. We consider this to be the lower limit for the contribution of glyoxal to SOA, as other sources of glyoxal other than isoprene are not included in our model. In addition, we find that AM3B shows better agreement on both formaldehyde and the correlation between glyoxal and formaldehyde (RGF = [GLYX]/[HCHO]), resulting from the suppression of δ-isoprene peroxy radicals (δ-ISOPO2). We also find that MCM v3.3.1 may underestimate glyoxal production from isoprene oxidation, in part due to an underestimated yield from the reaction of IEPOX peroxy radicals (IEPOXOO) with HO2. Our work highlights that the gas-phase production of glyoxal represents a large uncertainty in quantifying its contribution to SOA. 
    more » « less
  2. Abstract. Extensive airborne measurements of non-methane organic gases (NMOGs), methane, nitrogen oxides, reduced nitrogen species, and aerosol emissions from US wild and prescribed fires were conducted during the 2019 NOAA/NASA Fire Influence on Regional to Global Environments and Air Quality campaign (FIREX-AQ). Here, we report the atmospheric enhancement ratios (ERs) and inferred emission factors (EFs) for compounds measured on board the NASA DC-8 research aircraft for nine wildfires and one prescribed fire, which encompass a range of vegetation types. We use photochemical proxies to identify young smoke and reduce the effects of chemical degradation on our emissions calculations. ERs and EFs calculated from FIREX-AQ observations agree within a factor of 2, with values reported from previous laboratory and field studies for more than 80 % of the carbon- and nitrogen-containing species. Wildfire emissions are parameterized based on correlations of the sum of NMOGs with reactive nitrogen oxides (NOy) to modified combustion efficiency (MCE) as well as other chemical signatures indicative of flaming/smoldering combustion, including carbon monoxide (CO), nitrogen dioxide (NO2), and black carbon aerosol. The sum of primary NMOG EFs correlates to MCE with an R2 of 0.68 and a slope of −296 ± 51 g kg−1, consistent with previous studies. The sum of the NMOG mixing ratios correlates well with CO with an R2 of 0.98 and a slope of 137 ± 4 ppbv of NMOGs per parts per million by volume (ppmv) of CO, demonstrating that primary NMOG emissions can be estimated from CO. Individual nitrogen-containing species correlate better with NO2, NOy, and black carbon than with CO. More than half of the NOy in fresh plumes is NO2 with an R2 of 0.95 and a ratio of NO2 to NOy of 0.55 ± 0.05 ppbv ppbv−1, highlighting that fast photochemistry had already occurred in the sampled fire plumes. The ratio of NOy to the sum of NMOGs follows trends observed in laboratory experiments and increases exponentially with MCE, due to increased emission of key nitrogen species and reduced emission of NMOGs at higher MCE during flaming combustion. These parameterizations will provide more accurate boundary conditions for modeling and satellite studies of fire plume chemistry and evolution to predict the downwind formation of secondary pollutants, including ozone and secondary organic aerosol.

     
    more » « less
  3. Abstract

    Shipping particle number emission is important as it can influence cloud condensation nuclei abundance and thus indirectly affect clouds and perturb the Earth's radiation budget. Here, we integrate a size‐resolved Advanced Particle Microphysics module with a photochemical BOX MOdeling eXtension to the Kinetic PreProcessor and employ the resulting model to understand the microphysical and chemical characteristics of ship plumes. Simulated concentrations of key gaseous species and particle numbers are in good agreement compared with measurements from the NOAA Intercontinental Transport and Chemical Transformation (ITCT) 2K2 field study off the California coast. Further analysis reveals that significant new particle formation can occur in the plume and the growth of these secondary particles to 5–20 nm generally dominates the total particle numbers. We show that wind speed, emission rates of SO2and NOx, solar irradiation, ambient temperature, and background [NH3] have strong nonlinear effects on the ship particle number emission index (EIPN). Depending on the ambient air and meteorological conditions, the model simulations show that EIPN can range from ∼2.5 × 1014no. kg−1fuel (dominated by primary particles) to ∼3.0 × 1018no. kg−1fuel (dominated by secondary particles). In consideration of the current worldwide expansion of Emission Control Areas, we systematically study how the EIPN decreases with reduction of fuel sulfur content to 0.1%. Our study highlights the necessity of accounting for the nonlinear dependence of secondary particle formation on key controlling parameters in calculating shipping particle number emissions, which is important for determining aerosol indirect climate effects.

     
    more » « less
  4. Abstract. A new technique was used to directly measure O3 response to changes inprecursor NOx and volatile organic compound (VOC) concentrations in the atmosphere using threeidentical Teflon smog chambers equipped with UV lights. One chamberserved as the baseline measurement for O3 formation, one chamber addedNOx, and one chamber added surrogate VOCs (ethylene, m-xylene,n-hexane). Comparing the O3 formation between chambers over a3-hour UV cycle provides a direct measurement of O3 sensitivity toprecursor concentrations. Measurements made with this system at Sacramento,California, between April–December 2020 revealed that theatmospheric chemical regime followed a seasonal cycle. O3 formation wasVOC-limited (NOx-rich) during the early spring, transitioned toNOx-limited during the summer due to increased concentrations ofambient VOCs with high O3 formation potential, and then returned toVOC-limited (NOx-rich) during the fall season as the concentrations ofambient VOCs decreased and NOx increased. This seasonal pattern ofO3 sensitivity is consistent with the cycle of biogenic emissions inCalifornia. The direct chamber O3 sensitivity measurements matchedsemi-direct measurements of HCHO/NO2 ratios from the TROPOsphericMonitoring Instrument (TROPOMI) aboard the Sentinel-5 Precursor (Sentinel-5P) satellite. Furthermore, the satellite observations showed thatthe same seasonal cycle in O3 sensitivity occurred over most of theentire state of California, with only the urban cores of the very largecities remaining VOC-limited across all seasons. The O3-nonattainmentdays (MDA8 O3>70 ppb) have O3 sensitivity in theNOx-limited regime, suggesting that a NOx emissions controlstrategy would be most effective at reducing these peak O3concentrations. In contrast, a large portion of the days with MDA8 O3concentrations below 55 ppb were in the VOC-limited regime, suggesting thatan emissions control strategy focusing on NOx reduction would increaseO3 concentrations. This challenging situation suggests that emissionscontrol programs that focus on NOx reductions will immediately lowerpeak O3 concentrations but slightly increase intermediate O3concentrations until NOx levels fall far enough to re-enter theNOx-limited regime. The spatial pattern of increasing and decreasingO3 concentrations in response to a NOx emissions control strategyshould be carefully mapped in order to fully understand the public healthimplications. 
    more » « less
  5. Abstract

    We present emission measurements of volatile organic compounds (VOCs) for western U.S. wildland fires made on the NSF/NCAR C‐130 research aircraft during the Western Wildfire Experiment for Cloud Chemistry, Aerosol Absorption, and Nitrogen (WE‐CAN) field campaign in summer 2018. VOCs were measured with complementary instruments onboard the C‐130, including a proton‐transfer‐reaction time‐of‐flight mass spectrometer (PTR‐ToF‐MS) and two gas chromatography (GC)‐based methods. Agreement within combined instrument uncertainties (<60%) was observed for most co‐measured VOCs. GC‐based measurements speciated the isomeric contributions to selected PTR‐ToF‐MS ion masses and generally showed little fire‐to‐fire variation. We report emission ratios (ERs) and emission factors (EFs) for 161 VOCs measured in 31 near‐fire smoke plume transects of 24 specific individual fires sampled in the afternoon when burning conditions are typically most active. Modified combustion efficiency (MCE) ranged from 0.85 to 0.94. The measured campaign‐average total VOC EF was 26.1 ± 6.9 g kg−1, approximately 67% of which is accounted for by oxygenated VOCs. The 10 most abundantly emitted species contributed more than half of the total measured VOC mass. We found that MCE alone explained nearly 70% of the observed variance for total measured VOC emissions (r2 = 0.67) and >50% for 57 individual VOC EFs representing more than half the organic carbon mass. Finally, we found little fire‐to‐fire variability for the mass fraction contributions of individual species to the total measured VOC emissions, suggesting that a single speciation profile can describe VOC emissions for the wildfires in coniferous ecosystems sampled during WE‐CAN.

     
    more » « less