An official website of the United States government
We have prepared the first crystalline and 3D periodically ordered mesoporous quaternary semiconductor photocatalyst in an evaporation-induced self-assembly assisted soft-templating process. Using lab synthesized triblock-terpolymer poly(isoprene- b -styrene- b -ethylene oxide) (ISO) a highly ordered 3D interconnected alternating gyroid morphology was achieved exhibiting near and long-range order, as evidenced by small angle X-ray scattering (SAXS) and electron microscopy (TEM/SEM). Moreover, we reveal the formation process on the phase-pure construction of the material's pore-walls with its high crystallinity, which proceeds along a highly stable W 5+ compound, by both in situ and ex situ analyses, including X-ray powder diffraction (XRPD), Fourier transform infrared spectroscopy (FTIR) and electron paramagnetic resonance (EPR). The resulting photocatalyst CsTaWO 6 with its optimum balance between surface area and ordered mesoporosity ultimately shows superior hydrogen evolution rates over its non-ordered reference in photocatalytic hydrogen production. This work will help to advance new self-assembly preparation pathways towards multi-element multifunctional compounds for different applications, including improved battery and sensor electrode materials.
more »
« less
Effects of Periodic Pore Ordering on Photocatalytic Hydrogen Generation with Mesoporous Semiconductor Oxides
Crystalline and 3D continuous mesoporous quaternary CsTaWO 6 semiconductors are prepared with different degrees of long‐range periodic order and local order, respectively, to investigate the influence of periodic pore order on the photocatalytic performance in hydrogen evolution of mesoporous photocatalysts. The degree of long‐range order of the mesopores is changed by modifying the ratio between metal precursors and soft polymer template poly(isoprene‐ b ‐styrene‐ b ‐ethylene oxide) (PI‐ b ‐PS‐ b ‐PEO; ISO) in the sol–gel synthesis. Long‐range periodic order is found to have no appreciable advantage compared with an only locally ordered continuous pore system. On the contrary, nonperiodically ordered mesopores result in higher activity toward photocatalytic hydrogen evolution, even with slightly smaller pore diameter and lower cumulative pore volume. Most importantly, it is shown that pore connectivity and heterogeneous pore systems in mesoporous photocatalysts play a major role for hydrogen evolution when other parameters are confirmed to be not rate limiting.
more »
« less
- PAR ID:
- 10450348
- Date Published:
- Journal Name:
- Small Structures
- Volume:
- 4
- Issue:
- 6
- ISSN:
- 2688-4062
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract The effect of nanoconfinement on the kinetics of benzyl methacrylate radical polymerization is investigated using differential scanning calorimetry. Controlled pore glass (CPG), ordered mesoporous carbons, and mesoporous silica are used as confinement media with pore sizes from 2 to 8 nm. The initial polymerization rate in CPG and mesoporous silica increases relative to the bulk and increases linearly with reciprocal pore size; whereas, the rate in the carbon mesopores decreases linearly with reciprocal pore size; the changes are consistent with the rate being related to the ratio of the pore surface area to pore volume. Induction times are longer for nanoconfined polymerizations, and in the case of CPG and carbon mesopores, autoacceleration occurs earlier, presumably due to the limited diffusivity and lower termination rates for the confined polymer chains. The molecular weight of the polymer synthesized in the nanopores is generally higher than that obtained in the bulk except at the lowest temperatures investigated. The equilibrium conversion under nanoconfinement decreases with decreasing temperature and with confinement size, exhibiting what appears to be a floor temperature at low temperatures.more » « less
-
High throughput theoretical methods are increasingly used to identify promising photocatalytic materials for hydrogen generation from water as a clean source of energy. While most promising water splitting candidates require co-catalyst loading and electrical biasing, computational costs to predict them a priori become large. It is, therefore, important to identify bare, bias-free semiconductor photocatalysts with small initial hydrogen production rates, often in the range of tens of nanomoles per hour, as these can become highly efficient with further co-catalyst loading and biasing. Here, we report a sensitive hydrogen detection system suitable for screening new photocatalysts. The hydrogen evolution rate of the prototypical rutile TiO 2 loaded with 0.3 wt. % Pt is detected to be 78.0 ± 0.8 µmol/h/0.04 g, comparable with the rates reported in the literature. In contrast, sensitivity to an ultralow evolution rate of 11.4 ± 0.3 nmol/h/0.04 g is demonstrated for bare polycrystalline TiO 2 without electrical bias. Two candidate photocatalysts, ZnFe 2 O 4 (18.1 ± 0.2 nmol/h/0.04 g) and Ca 2 PbO 4 (35.6 ± 0.5 nmol/h/0.04 g) without electrical bias or co-catalyst loading, are demonstrated to be potentially superior to bare TiO 2 . This work expands the techniques available for sensitive detection of photocatalytic processes toward much faster screening of new candidate photocatalytic materials in their bare state.more » « less
-
Mesoporous polyetherimides are important high-performance polymers. Conventional strategies to prepare porous polyetherimides, and polyimide in general, are based on covalent organic framework or thermolysis of sacrificial polymers. The former produces micropores due to intrinsically crosslinked microstructures, and the latter results in macropores because of a blowing effect by the sacrificial polymers. The preparation of mesopores remains a challenge. Here we have prepared mesoporous polyetherimide films by hydrolyzing polylactide- b -polyetherimide- b -polylactide (AIA). Controlled by molecular weight and volume fraction of polylactide in AIA, the porous films exhibit an average pore width of 24 nm. The mesoporous polyetherimide films exhibit a storage modulus of ∼1 GPa at ambient temperatures. This work advances the chemistry of high-performance polymers and provides an alternative strategy to prepare mesoporous polymers, enabling potential use as high-performance membranes for separation, purification, and electrochemistry.more » « less
-
Electron shuttle in the MOF derived TiO 2 /CuO heterojunction boosts light driven hydrogen evolutionMetal organic frameworks (MOFs) have emerged as a novel template to develop porous photocatalytic materials for solar fuel conversion. In this work, we report the synthesis, charge separation dynamics, and photocatalytic performance of the TiO 2 /CuO heterostructure derived from mixed-phase MOFs based on Ti and Cu metal nodes, which demonstrates significantly enhanced catalytic activity for the hydrogen evolution reaction (HER) compared to metal oxides derived from single node MOFs. More importantly, using transient absorption spectroscopy, we identified the specific role each component in the heterostructure plays and unravelled the key intermediate species that is responsible for the exceptional photocatalytic activity of the heterostructure. We found that the HER is initiated with ultrafast electron transfer (<150 fs) from the molecular photosensitizer to the conduction band of TiO 2 , where TiO 2 acts as an electron mediator and shuttles the electron to the CuO cocatalyst, facilitating charge separation and ultimately boosting the HER efficiency. These results not only demonstrate the great potential of using mixed-phase MOFs as templates to synthesize mesoporous heterostructure photocatalysts but also provide important insight into the HER mechanism.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript
- Journal Article:
- https://doi.org/10.1002/sstr.202200184
