An official website of the United States government
High-efficiency and low-cost catalysts for the oxygen evolution reaction (OER) in acidic electrolytes are critical for electrochemical water splitting in proton exchange membrane (PEM) electrolyzers to produce green hydrogen, a clean fuel for sustainable energy conversion and storage. Among OER catalysts, solid-state synthesized SrCo1−xIrxO3 has demonstrated superior activity compared to commercial standards, such as IrO2 and RuO2. However, the solid-state synthesis process is economically inefficient for industrial use due to the potential for impurities and low yield of the final product. In addition, the requirement for electrochemical cycling to activate the catalyst introduces contaminations and uncertainties for industrial applications. In this study, a modified solution-based sol–gel method was employed to produce SrCo0.5Ir0.5O3 (SCIO) with high purity and yield. Subsequent ball milling and acid leaching treatments were applied, resulting in a catalyst with higher efficiency than those activated solely by electrochemical cycling. The electrochemical analysis and physical characterizations of our SCIO catalyst after ex-situ post-synthesis treatments show a similar active phase in composition and structure to those obtained through in situ electrochemical cycling and activation. Our approach simplifies the preparation process, making the catalyst ready for direct use in PEM electrolyzers without further treatment, offering a promising solution for producing high-performance, industrial-scale OER catalysts.
more »
« less
Advanced Electrocatalysis for Energy and Environmental Sustainability via Water and Nitrogen Reactions
Abstract Clean and efficient energy storage and conversion via sustainable water and nitrogen reactions have attracted substantial attention to address the energy and environmental issues due to the overwhelming use of fossil fuels. These electrochemical reactions are crucial for desirable clean energy technologies, including advanced water electrolyzers, hydrogen fuel cells, and ammonia electrosynthesis and utilization. Their sluggish reaction kinetics lead to inefficient energy conversion. Innovative electrocatalysis, i.e., catalysis at the interface between the electrode and electrolyte to facilitate charge transfer and mass transport, plays a vital role in boosting energy conversion efficiency and providing sufficient performance and durability for these energy technologies. Herein, a comprehensive review on recent progress, achievements, and remaining challenges for these electrocatalysis processes related to water (i.e., oxygen evolution reaction, OER, and oxygen reduction reaction, ORR) and nitrogen (i.e., nitrogen reduction reaction, NRR, for ammonia synthesis and ammonia oxidation reaction, AOR, for energy utilization) is provided. Catalysts, electrolytes, and interfaces between the two within electrodes for these electrocatalysis processes are discussed. The primary emphasis is device performance of OER‐related proton exchange membrane (PEM) electrolyzers, ORR‐related PEM fuel cells, NRR‐driven ammonia electrosynthesis from water and nitrogen, and AOR‐related direct ammonia fuel cells.
more »
« less
- Award ID(s):
- 1804326
- PAR ID:
- 10453345
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Materials
- Volume:
- 33
- Issue:
- 6
- ISSN:
- 0935-9648
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER) are three critical reactions for energy-related applications, such as water electrolyzers and metal-air batteries. Graphene-supported single-atom catalysts (SACs) have been widely explored; however, either experiments or density functional theory (DFT) computations cannot screen catalysts at high speed. Herein, based on DFT computations of 104 graphene-supported SACs (M@C3, M@C4, M@pyridine-N4, and M@pyrrole-N4), we built up machine learning (ML) models to describe the underlying pattern of easily obtainable physical properties and limiting potentials (errors = 0.013/0.005/0.020 V for ORR/OER/HER, respectively), and employed these models to predict the catalysis performance of 260 other graphene-supported SACs containing metal-NxCy active sites (M@NxCy). We recomputed the top catalysts recommended by ML towards ORR/OER/HER by DFT, which confirmed the reliability of our ML model, and identified two OER catalysts (Ir@pyridine-N3C1 and Ir@pyridine-N2C2) outperforming noble metal oxides, RuO2 and IrO2. The ML models quantitatively unveiled the significance of various descriptors and fast narrowed down the potential list of graphene-supported single-atom catalysts. This approach can be easily used to screen and design other SACs, and significantly accelerate the catalyst design for many other important reactions.more » « less
-
Abstract Carbon nanomaterials are promising metal‐free catalysts for energy conversion and storage, but the catalysts are usually developed via traditional trial‐and‐error methods. To rationally design and accelerate the search for the highly efficient catalysts, it is necessary to establish design principles for the carbon‐based catalysts. Here, theoretical analysis and material design of metal‐free carbon nanomaterials as efficient photo‐/electrocatalysts to facilitate the critical chemical reactions in clean and sustainable energy technologies are reviewed. These reactions include the oxygen reduction reaction in fuel cells, the oxygen evolution reaction in metal–air batteries, the iodine reduction reaction in dye‐sensitized solar cells, the hydrogen evolution reaction in water splitting, and the carbon dioxide reduction in artificial photosynthesis. Basic catalytic principles, computationally guided design approaches and intrinsic descriptors, catalytic material design strategies, and future directions are discussed for the rational design and synthesis of highly efficient carbon‐based catalysts for clean energy technologies.more » « less
-
Abstract Recently, lithium‐mediated nitrogen reduction reaction (Li‐NRR) in nonaqueous electrolytes has proven to be an environmentally friendly and feasible route for ammonia electrosynthesis, revealing tremendous economic and social advantages over the industrial Haber‐Bosch process which consumes enormous fossil fuels and generates massive carbon dioxide emissions, and direct electrocatalytic nitrogen reduction reaction (NRR) which suffers from sluggish kinetics and poor faradaic efficiencies. However, reaction mechanisms of Li‐NRR and the role of solid electrolyte interface (SEI) layer in activating N2remain unclear, impeding its further development. Here, using electronic structure theory, we discover a nitridation‐coupled reduction mechanism and a nitrogen cycling reduction mechanism on lithium and lithium nitride surfaces, respectively, which are major components of SEI in experimental characterization. Our work reveals divergent pathways in Li‐NRR from conventional direct electrocatalytic NRR, highlights the role of surface reconstruction in improving reactivity, and sheds light on further enhancing efficiency of ammonia electrosynthesis.more » « less
-
The oxygen reduction reaction (ORR) is a critical process in energy conversion systems, influencing the efficiency and performance of various devices such as fuel cells, batteries, and electrolyzers. Perovskite-supported metal materials (metal/perovskite) offer several advantages as ORR electrocatalysts, including strong metal-support interactions, oxygen vacancy formation in the perovskite lattice, and synergistic triple-phase boundary (TPB) activity at the interface. Despite their significance, the mechanistic understanding of ORR on metal/perovskite catalysts remains incomplete, particularly at metal/perovskite interfaces. This study investigates ORR on BaZrO3 (BZO) perovskite-supported metal clusters (Pt or Ag) using density functional theory (DFT) to unravel critical insights into charge redistribution at the metal/BZO interface. Energy profiles for elemental steps along two different ORR pathways—oxygen adsorption on the metal cluster surface and direct oxygen adsorption at the TPB—were calculated to explore the effects of different active sites. The results provide a deeper understanding of ORR on metal/perovskite catalysts, emphasizing the role of interfacial interactions and pathway-dependent reaction mechanisms. This work paves the way for guiding the design of high-performance electrocatalysts for ORR in terms of composition, interface design, and local environment modification for a broad range of energy applications.more » « less
