An official website of the United States government
Abstract Acoustic source inversions estimate the mass flow rate of volcanic explosions or yield of chemical explosions and provide insight into potential source directionality. However, the limitations of applying these methods to complex sources and their ability to resolve a stable solution have not been investigated in detail. We perform synthetic infrasound waveform inversions that use 3‐D Green’s functions for a variety of idealized and realistic deployment scenarios using both a flat plane and Yasur volcano, Vanuatu as examples. We investigate the ability of various scenarios to retrieve the input source functions and relative amplitudes for monopole and multipole (monopole and dipole) inversions. Infrasound waveform inversions appear to be a robust method to quantify mass flow rates from simple sources (monopole) using deployments of infrasound sensors placed around a source, but care should be taken when analyzing and interpreting results from more complex acoustic sources (multipole) that have significant directional components. In the examples we consider the solution is stable for monopole inversions with a signal‐to‐noise ratio greater than five and the dipole component is small. For most scenarios investigated, the vertical dipole component of the multipole explosion source is poorly constrained and can impact the ability to recover the other source term components. Because multipole inversions are ill‐posed for many deployments, a low residual does not necessarily mean the proper source vector has been recovered. Synthetic studies can help investigate the limitations and place bounds on information that may be missing using monopole and multipole inversions for potentially directional sources.
more »
« less
Three‐Dimensional Acoustic Multipole Waveform Inversion at Yasur Volcano, Vanuatu
Abstract Acoustic waveform inversions can provide estimates of volume flow rate and erupted mass, enhancing the ability to estimate volcanic emissions. Previous studies have generally assumed a simple acoustic source (monopole); however, more complex and accurate source reconstructions are possible with a combination of equivalent sources (multipole). We deployed a high‐density acoustic network around Yasur volcano, Vanuatu, including acoustic sensors on a tethered aerostat that was moved every ∼15–60 min. Using this unique data set we invert for the acoustic multipole source mechanism using a grid search approach for 80 events to examine volume flow rates and dipole strengths. Our method utilizes finite‐difference time‐domain modeling to obtain the full 3‐D Green's functions that account for topography. Inversion results are compared using a monopole‐only, multipole (monopole and dipole), simulations that do not include topography, and those that use a subset of sensors. We find that the monopole source is a good approximation when topography is considered. However, initial compression amplitude is not fully captured by a monopole source so source directionality cannot be ruled out. The monopole solution is stable regardless of whether a monopole‐only or multipole inversion is performed. Inversions for the dipole components produce estimates consistent with observed source directionality, though these inversions are somewhat unstable given station configurations of typical deployments. Our results suggest that infrasound waveform inversion shows promise for realistic quantitative source estimates, but additional work is necessary to fully explore inversion stability, uncertainty, and robustness.
more »
« less
- PAR ID:
- 10455342
- Publisher / Repository:
- DOI PREFIX: 10.1029
- Date Published:
- Journal Name:
- Journal of Geophysical Research: Solid Earth
- Volume:
- 124
- Issue:
- 8
- ISSN:
- 2169-9313
- Page Range / eLocation ID:
- p. 8679-8703
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Infrasound (low frequency sound waves) can be used to monitor and characterize volcanic eruptions. However, infrasound sensors are usually placed on the ground, thus providing a limited sampling of the acoustic radiation pattern that can bias source size estimates. We present observations of explosive eruptions from a novel uncrewed aircraft system (UAS)‐based infrasound sensor platform that was strategically hovered near the active vents of Stromboli volcano, Italy. We captured eruption infrasound from short‐duration explosions and jetting events. While potential vertical directionality was inconclusive for the short‐duration explosion, we find that jetting events exhibit vertical sound directionality that was observed with a UAS close to vertical. This directionality would not have been observed using only traditional deployments of ground‐based infrasound sensors, but is consistent with jet noise theory. This proof‐of‐concept study provides unique information that can improve our ability to characterize and quantify the directionality of volcanic eruptions and their associated hazards.more » « less
-
This work concerns process monitoring in the laser powder bed fusion additive manufacturing process. In this work, we developed and applied a novel in-situ solution for process stability monitoring and flaw detection using acoustic emission sensing. Current process monitoring methods in laser powder bed fusion only focus on the top surface of the deposition process, using an array of sensors to capture data on a layer-by-layer basis. Common sensors used for in-situ monitoring of the laser powder bed fusion process are optical, infrared, and highspeed imaging cameras along with pyrometers and photodiodes. A critical flaw with traditional top surface monitoring methodologies is that they are unable to reliably monitor the subsurface phenomena that occur in the laser powder bed fusion process. These subsurface effects are caused by the meltpool penetrating multiple layers below the top surface, leading to the re-solidification of the microstructure and potentially generating keyhole porosity. By only monitoring the top surface of the laser powder bed fusion process, the meltpool depth aspects and effects are ignored. To overcome the limitations of current in-situ monitoring of subsurface effects, this work utilizes four passive acoustic emission sensors attached to the build plate. These acoustic emission sensors monitor the energy emissions generated from the surface-level laser material interactions. Moreover, the acoustic emission signals are capable of traveling through the previously deposited layers, through the build plate, and to the sensors. Therefore, the acoustic waveform generated by the laser can capture process phenomena ranging from the crystallographic level to the macro-scale layer level which are at the root of flaw formation inside the deposited part. Hence, acoustic emission monitoring has the ability to monitor the subsurface effects in the laser powder bed fusion process. To monitor and analyze this acoustic waveform, novel wavelet-based decomposition is combined with heterogeneous sensor fusion to not only capture the acoustic waveform in time, but also in locational space on the build plate. Locational acoustic emission data enables the ability to determine the source of the generated acoustic waveform which is advantageous when the location of flaws is desired. This extracted spatially placed acoustic waveform data is able to detect the effect of processing parameters with a statistical fidelity of 99%. The proposed locational acoustic waveform monitoring method correlates to the resulting surface roughness of manufactured samples with a fidelity of 86%. Additionally, we show that acoustic waveform monitoring detects the onset of part failure, recoater crashes, and warpage prior a priori to the actual failure point.more » « less
-
There is a trade-off between the sparseness of an absorber array and its sound absorption imposed by wave physics. Here, near-perfect absorption (99% absorption) is demonstrated when the spatial period of monopole-dipole resonators is close to one working wavelength (95% of the wavelength). The condition for perfect absorption is to render degenerate monopole-dipole resonators critically coupled. Frequency domain simulations, eigenfrequency simulations, and the coupled mode theory are utilized to demonstrate the acoustic performances and the underlying physics. The sparse-resonator-based sound absorber could greatly benefit noise control with air flow and this study could also have implications for electromagnetic wave absorbers.more » « less
-
null (Ed.)Infrasound observations are commonly used to constrain properties of subaerial volcanic eruptions. In order to better interpret infrasound observations, however, there is a need to better understand the relationship between eruption properties and sound generation. Here we perform two-dimensional computational aeroacoustic simulations where we solve the compressible Navier-Stokes equations with a large-eddy simulation approximation. We simulate idealized impulsive volcanic eruptions where the exit velocity is specified and the eruption is pressure-balanced with the atmosphere. Our nonlinear simulation results are compared with the commonly used analytical linear acoustics model of a compact monopole source radiating acoustic waves isotropically in a half space. The monopole source model matches the simulations for low exit velocities (M < 0.3 where M is the Mach number); however, the two solutions diverge as the exit velocity increases with the simulations developing lower peak amplitude and more rapid onset. For high exit velocities (M>0.8) the radiation pattern becomes anisotropic, with stronger infrasound signals recorded above the vent than on Earth's surface (50% greater peak amplitude for an eruption with M=0.95) and interpreting ground-based infrasound observations with the monopole source model can result in an underestimation of the erupted volume. We examine nonlinear effects and show that nonlinear effects during propagation are relatively minor. Instead, the dominant nonlinear effect is sound generation by the complex flow structure that develops above the vent. This work demonstrates the need to consider anisotropic radiation patterns and near-vent fluid flow when interpreting infrasound observations, particularly for eruptions with sonic or supersonic exit velocities.more » « less
