An official website of the United States government
Abstract Pyroclastic density currents (PDCs) are the most lethal volcanic process on Earth. Forecasting their inundation area is essential to mitigate their risk, but existing models are limited by our poor understanding of their dynamics. Here, we explore the role of evolving grain-size distribution in controlling the runout of the most common PDCs, known as block-and-ash flows (BAFs). Through a combination of theory, analysis of deposits and experiments of natural mixtures, we show that rapid changes of the grain-size distribution transported in BAFs result in the reduction of pore volume (compaction) within the first kilometres of their runout. We then use a multiphase flow model to show how the compressibility of granular mixtures leads to fragmentation-induced fluidisation (FIF) and excess pore-fluid pressure in BAFs. This process dominates the first ~2 km of their runout, where the effective friction coefficient is progressively reduced. Beyond that distance, transport is modulated by diffusion of the excess pore pressure. Fragmentation-induced fluidisation provides a physical basis to explain the decades-long use of low effective friction coefficients used in depth-averaged simulations required to match observed flow inundation.
more »
« less
The Permeability of Volcanic Mixtures—Implications for Pyroclastic Currents
Abstract Geophysical fluid‐granular flows, such as pyroclastic currents and debris flows, owe much of their runout and hazard behavior to the occurrence and time‐variant decay of a flow‐internal fluid pore pressure. However, modeling the effects of fluid pore pressure to forecast hazards is challenging because a unified method in Earth Sciences to quantitatively determine the permeability of these natural mixtures is currently missing. Here we combine experiments on fluidization and defluidization of pyroclastic materials, eolian sediments, and glass beads mixtures with numerical multiphase simulations to compare previous attempts to compute the permeability of complex natural particle‐fluid mixtures. In analogy to particle‐engineering studies on simple gas‐particle mixtures, we demonstrate that the effective length‐scale in the characterization of the fluid‐particle interaction of complex natural mixtures is the product of the Sauter mean diameter and the particle sphericity. Its use in the Kozeny‐Carman equation allows accurate prediction of mixture permeability, and we suggest the routine calculation of the Sauter mean from grain size distributions of the deposits of geophysical mass flows in Earth Sciences. We also show, through defluidization experiments, that the duration of gas retention in natural mixtures is well described when using the Sauter mean as the effective particle size. Further, we show through multiphase simulations that initial bed expansion extends the pore pressure diffusion timescale up to nine times. These results can be applied to small‐to‐large volume dense pyroclastic currents where the ranges of Sauter mean diameter predict gas retention for long duration and to debris flows and snow avalanches.
more »
« less
- PAR ID:
- 10455927
- Publisher / Repository:
- DOI PREFIX: 10.1029
- Date Published:
- Journal Name:
- Journal of Geophysical Research: Solid Earth
- Volume:
- 124
- Issue:
- 2
- ISSN:
- 2169-9313
- Page Range / eLocation ID:
- p. 1343-1360
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract The dynamics of geophysical dilute turbulent gas‐particles mixtures depends to a large extent on particle concentration, which in turn depends predominantly on the particle settling velocity. We experimentally investigate air‐particle mixtures contained in a vertical pipe in which the velocity of an ascending air flux matches the settling velocity of glass particles. To obtain local particle concentrations in these mixtures, we use acoustic probing and air pressure measurements and show that these independent techniques yield similar results for a range of particle sizes and particle concentrations. Moreover, we find that in suspensions of small particles (78 μm) the settling velocity increases with the local particle concentration due to the formation of particle clusters. These clusters settle with a velocity that is four times faster than the terminal settling velocity of single particles, and they double settling speeds of the suspensions. In contrast, in suspensions of larger particles (467 μm) the settling velocity decreases with increasing particle concentration. Although particle clusters are still present in this case, the settling velocity is decreased by 30%, which is captured by a hindered settling model. These results suggest an interplay between hindered settling and cluster‐induced enhanced settling, which in our experiments occur respectively at Stokes number O(100) and O(1). We discuss implications for volcanic plumes and pyroclastic currents. Our study suggests that clustering and related enhanced or hindered particle settling velocities should be considered in models of volcanic phenomena and that drag law corrections are needed for reliable predictions and hazard assessment.more » « less
-
Debris flows are dense and fast-moving complex suspensions of soil and water that threaten lives and infrastructure. Assessing the hazard potential of debris flows requires predicting yield and flow behavior. Reported measurements of rheology for debris flow slurries are highly variable and sometimes contradictory due to heterogeneity in particle composition and volume fraction ( ϕ ) and also inconsistent measurement methods. Here we examine the composition and flow behavior of source materials that formed the postwildfire debris flows in Montecito, CA, in 2018, for a wide range of ϕ that encapsulates debris flow formation by overland flow. We find that shear viscosity and yield stress are controlled by the distance from jamming, Δ ϕ = ϕ m − ϕ , where the jamming fraction ϕ m is a material parameter that depends on grain size polydispersity and friction. By rescaling shear and viscous stresses to account for these effects, the data collapse onto a simple nondimensional flow curve indicative of a Bingham plastic (viscoplastic) fluid. Given the highly nonlinear dependence of rheology on Δ ϕ , our findings suggest that determining the jamming fraction for natural materials will significantly improve flow models for geophysical suspensions such as hyperconcentrated flows and debris flows.more » « less
-
Esposti Ongaro, T. (Ed.)A multiphase fluid dynamic model is used to explore the effects of entrainment of granular debris into sustained volcanic jets such as those which produce sub-Plinian to Plinian eruption columns. The debris may be sourced from processes such as avalanches from crater walls or from recycling of previously erupted material. The results indicate that debris is not immediately, homogeneously mixed into a jet but instead forms a dense sheath that is dragged upward around the jet margin. While very small volumes of debris relative to the eruptive discharge rate mix progressively into the jet with increasing altitude, the dense sheath can inhibit entrainment of air into the lower portions of the jet, which may explain signs of column instability such as increased stratification in fallout deposits where lithic content increases. As debris volume increases, the dense sheath can collapse from a range of elevations to feed pyroclastic currents. The presence of the sheath of entrained debris contradicts some assumptions such as the top-hat profile for density and velocity that is commonly used in 1-D models. Transitions from fallout-producing buoyant column to collapsing behavior can be related to debris entrainment without any changes in primary eruption parameters such as vent size, exit velocity, or gas content. Boiling-over behavior can also be caused by debris entrainment, including recycling of previously erupted material such as might occur in a crater with restricted outlet. When entrained debris is relatively fine-grained such that it can couple well with the erupting mixture, complex, highly transient overpressured jet processes can occur due to the pinching effect of debris flowing into the base of the jet. Increasingly coarse debris causes collimation of the jet within the sheath of entrained material. The results suggest that accounting for the effects of debris entrainment is likely important for theoretical assessment of many natural eruption sequences and for assessment of hazard scenarios for potential sub-Plinian to Plinian activity.more » « less
-
Abstract Soft sediment deformation structures are common in fine-grained pyroclastic deposits and are often taken, along with other characteristics, to indicate that deposits were emplaced in a wet and cohesive state. At Ubehebe Crater (Death Valley, California, USA), deposits were emplaced by multiple explosions, both directly from pyroclastic surges and by rapid remobilization of fresh, fine-ash-rich deposits off steep slopes as local granular flows. With the exception of the soft sediment deformation structures themselves, there is no evidence of wet deposition. We conclude that deformation was a result of destabilization of fresh, fine-grained deposits with elevated pore-gas pressure and dry cohesive forces. Soft sediment deformation alone is not sufficient to determine whether parent pyroclastic surges contained liquid water and caused wet deposition of strata.more » « less
