An official website of the United States government
Hollow microneedles are extremely attractive to drug delivery domains with high demands from clinics and industry. However, its complicated fabrication processes have impeded its wide adoption. This paper presents a simple one-step fabrication method for hollow microneedles based on diffraction UV lithography and solid-liquid light propagation. The fabrication process utilizes bottom-up exposure of a liquid photosensitive resin through photomask patterns comprising a plurality of apertures. Hollow microneedles with various heights were fabricated in a range of 400 µm to 600 µm from a few minutes of UV exposure. The fabricated hollow microneedles were characterized with force-displacement tests showing a good tip strength of 0.35 N per single unit. A hollow fluidic test on a pig cadaver skin showed great potential for drug delivery. Also, batch fabrication with multiple height microneedles on a single substrate has demonstrated compatibility with the manufacturing process.
more »
« less
Cleanroom‐Free Fabrication of Microneedles for Multimodal Drug Delivery
Abstract Microneedles have recently emerged as a powerful tool for minimally invasive drug delivery and body fluid sampling. To date, high‐resolution fabrication of microneedle arrays (MNAs) is mostly achieved by the utilization of sophisticated facilities and expertise. Particularly, hollow microneedles have usually been manufactured in cleanrooms out of silicon, resin, or metallic materials. Such strategies do not support the fabrication of microneedles from biocompatible/biodegradable materials and limit the capability of multimodal drug delivery for the controlled release of different therapeutics through a combination of injection and sustained diffusion. This study implements low‐cost 3D printers to fabricate relatively large needle arrays, followed by repeatable shrink‐molding of hydrogels to form high‐resolution molds for solid and hollow MNAs with controllable sizes. The developed strategy further enables modulating surface topography of MNAs to tailor their surface area and instantaneous wettability for controllable drug delivery and body fluid sampling. Hybrid gelatin methacryloyl (GelMA)/polyethylene glycol diacrylate (PEGDA) MNAs are fabricated using the developed strategy that can easily penetrate the skin and enable multimodal drug delivery. The proposed method holds promise for affordable, controllable, and scalable fabrication of MNAs by researchers and clinicians for controlled spatiotemporal administration of therapeutics and sample collection.
more »
« less
- PAR ID:
- 10456094
- Date Published:
- Journal Name:
- Small
- Volume:
- 19
- Issue:
- 29
- ISSN:
- 1613-6810
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Transdermal delivery is an attractive delivery method that increases bioavailability, is suitable for a wide variety of therapeutics, and offers stable delivery outcomes. However, many therapeutics are unable to readily cross the stratum corneum. Microneedles mechanically disrupt the cutaneous barrier to deliver small molecules, proteins, and vaccines. To date, microneedles have not been used in conjunction with coacervate, a liquid–liquid phase separation that protects unstable proteins. A three‐layer microneedle for the controlled release of three different molecules is designed. Through micromolding, microneedles are efficiently generated, which benefits product scalability. The microneedles have good mechanical integrity and effectively penetrate porcine skin ex vivo. The three layers, in the microneedles, release the cargo in a three‐phase manner. The released protein maintains its structure well. Moreover, layer thickness can be controlled by varying fabrication parameters. The microneedles can incorporate both small molecule drugs and protein therapeutics, thus promising uses in multi‐drug therapies through a single treatment.more » « less
-
null (Ed.)Drug delivery through the skin offers many advantages such as avoidance of hepatic first-pass metabolism, maintenance of steady plasma concentration, safety, and compliance over oral or parenteral pathways. However, the biggest challenge for transdermal delivery is that only a limited number of potent drugs with ideal physicochemical properties can passively diffuse and intercellularly permeate through skin barriers and achieve therapeutic concentration by this route. Significant efforts have been made toward the development of approaches to enhance transdermal permeation of the drugs. Among them, microneedles represent one of the microscale physical enhancement methods that greatly expand the spectrum of drugs for transdermal and intradermal delivery. Microneedles typically measure 0.1–1 mm in length. In this review, microneedle materials, fabrication routes, characterization techniques, and applications for transdermal delivery are discussed. A variety of materials such as silicon, stainless steel, and polymers have been used to fabricate solid, coated, hollow, or dissolvable microneedles. Their implications for transdermal drug delivery have been discussed extensively. However, there remain challenges with sustained delivery, efficacy, cost-effective fabrication, and large-scale manufacturing. This review discusses different modes of characterization and the gaps in manufacturing technologies associated with microneedles. This review also discusses their potential impact on drug delivery, vaccine delivery, disease diagnostic, and cosmetics applications.more » « less
-
Microneedles (MNs) are micrometer-sized arrays that can penetrate the skin in a minimally invasive manner; these devices offer tremendous potential for the transdermal delivery of therapeutic molecules. Although there are many conventional techniques for manufacturing MNs, most of them are complicated and can only fabricate MNs with specific geometries, which restricts the ability to adjust the performance of the MNs. Herein, we present the fabrication of gelatin methacryloyl (GelMA) MN arrays using the vat photopolymerization 3D printing technique. This technique allows for the fabrication of high-resolution and smooth surface MNs with desired geometries. The existence of methacryloyl groups bonded to the GelMA was verified by 1 H NMR and FTIR analysis. To examine the effects of varying needle heights (1000, 750, and 500 µm) and exposure times (30, 50, and 70 s) on GelMA MNs, the height, tip radius, and angle of the needles were measured; their morphological and mechanical properties were also characterized. It was observed that as the exposure time increased, the height of the MNs increased; moreover, sharper tips were obtained and tip angles decreased. In addition, GelMA MNs exhibited good mechanical performance with no breakage up to 0.3 mm displacement. These results indicate that 3D printed GelMA MNs have great potential for transdermal delivery of various therapeutics.more » « less
-
This study summarizes the recent progress in thermoplastic drawing of bulk metallic glasses. The integration of drawing with templated embossing enables the fabrication of arrays of high-aspect-ratio nanostructures whereas the earlier drawing methodologies are limited to a single fiber. The two-step drawing can produce metallic glass structures such as, vertically aligned nanowires on substrates, nanoscale tensile specimens, hollow microneedles, helical shafts, and micro-yarns, which are challenging to fabricate with other thermoplastic forming operations. These geometries will open new applications for bulk metallic glasses in the areas of sensors, optical absorption, transdermal drug-delivery, and high-throughput characterization of size-effects. In this article, we review the emergence of template-based thermoplastic drawing in bulk metallic glasses. The review focuses on the development of experimental set-up, the quantitative description of drawing process, and the versatility of drawing methodology.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript
- Journal Article:
- https://doi.org/10.1002/smll.202207131
