An official website of the United States government
Abstract On-chip manipulation of charged particles using electrophoresis or electroosmosis is widely used for many applications, including optofluidic sensing, bioanalysis and macromolecular data storage. We hereby demonstrate a technique for the capture, localization, and release of charged particles and DNA molecules in an aqueous solution using tubular structures enabled by a strain-induced self-rolled-up nanomembrane (S-RuM) platform. Cuffed-in 3D electrodes that are embedded in cylindrical S-RuM structures and biased by a constant DC voltage are used to provide a uniform electrical field inside the microtubular devices. Efficient charged-particle manipulation is achieved at a bias voltage of <2–4 V, which is ~3 orders of magnitude lower than the required potential in traditional DC electrophoretic devices. Furthermore, Poisson–Boltzmann multiphysics simulation validates the feasibility and advantage of our microtubular charge manipulation devices over planar and other 3D variations of microfluidic devices. This work lays the foundation for on-chip DNA manipulation for data storage applications.
more »
« less
Effect of Perforation on the Thermal and Electrical Breakdown of Self‐Rolled‐Up Nanomembrane Structures
Abstract Strain‐induced self‐rolled‐up membranes (S‐RuM) are structures formed spontaneously by releasing a strained layer or layer stacks from its mechanical support, with unique applications in passive photonics, electronics, and bioengineering. Depending on the thermal properties of the strained layers, these structures can experience various thermally induced deformations. These deformations can be avoided and augmented with the addition of strategically placed perforations in the membrane. This study reports on the use of perforations to modify the thermal effects on strained silicon nitride S‐RuM structures. A programmable fuse with well‐defined thermal threshold, ultrasmall footprint, and 2–3 V voltage rating is demonstrated, which can potentially serve as an on‐chip sensing device for power electronic circuits.
more »
« less
- Award ID(s):
- 1701047
- PAR ID:
- 10459400
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Materials Interfaces
- Volume:
- 6
- Issue:
- 21
- ISSN:
- 2196-7350
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract This work reports a three‐dimensional (3D) radio frequency L−C filter network enabled by a CMOS‐compatible two‐dimensional (2D) fabrication approach, which combines inductive (L) and capacitive (C) self‐rolled‐up membrane (S‐RuM) components monolithically into a single L−C network structure, thereby greatly reducing the on‐chip area footprint. The individual L−C elements are fabricated in‐plane using standard semiconductor processing techniques, and subsequently triggered by the built‐in stress to self‐assemble and roll into cylindrical air‐core architectures. By designing the planar structure geometry and constituent layer properties to achieve a specific number of turns with a desired inner diameter when the device is rolled up, the electrical characteristics can be engineered. The network layouts of the L and C components are also reconfigurable by selecting appropriate input, output, and ground contact routing topographies. The devices demonstrated here operate over the range of ≈1−10 GHz. Their area and volume footprints are ≈0.09 mm2and ≈0.01 mm3, respectively, which are ≈10× smaller than most of the comparable conventional filter designs. These S‐RuM‐enabled 3D microtubular L−C filter networks represent significant advancement for miniaturization and integration of passive electronic components for applications in mobile connectivity and other frequency range.more » « less
-
Abstract Advanced mechanical metamaterials with unusual thermal expansion properties represent an area of growing interest, due to their promising potential for use in a broad range of areas. In spite of previous work on metamaterials with large or ultralow coefficient of thermal expansion (CTE), achieving a broad range of CTE values with access to large thermally induced dimensional changes in structures with high filling ratios remains a key challenge. Here, design concepts and fabrication strategies for a kirigami‐inspired class of 2D hierarchical metamaterials that can effectively convert the thermal mismatch between two closely packed constituent materials into giant levels of biaxial/uniaxial thermal expansion/shrinkage are presented. At large filling ratios (>50%), these systems offer not only unprecedented negative and positive biaxial CTE (i.e., −5950 and 10 710 ppm K−1), but also large biaxial thermal expansion properties (e.g., > 21% for 20 K temperature increase). Theoretical modeling of thermal deformations provides a clear understanding of the microstructure–property relationships and serves as a basis for design choices for desired CTE values. An Ashby plot of the CTE versus density serves as a quantitative comparison of the hierarchical metamaterials presented here to previously reported systems, indicating the capability for substantially enlarging the accessible range of CTE.more » « less
-
Abstract Cucurbit[n]urils (CB[n]s) are cyclic macrocycles with rich host‐guest chemistry. In many cases, guest binding in CB[n]s results in host structural deformations. Unfortunately, measuring such deformations remains a major challenge, with only a handful of manual estimations reported in the literature. To address this challenge, we have developed the public program ElliptiCB[n], which is available on GitHub, that provides a robust and automated method for measuring the elliptical deformations in CB[n] hosts. We outline the development and validation of this approach, apply ElliptiCB[n] to measure the ellipticity of the 1113 available CB[n] structures from the Cambridge Structural Database (CSD), and directly investigate the structural deformations of CB[5], CB[6], CB[7], CB[8], and CB[10] hosts. We also report the general landscape of accessible CB[n] elliptical deformations and compare ellipticity distributions across CB[n] hosts and host‐guest complexes. We found that in almost all cases guest binding significantly impacts the distribution of host ellipticity distributions and that these distributions are dissimilar across host‐guest complexes of differently sized CB[n]s. We anticipate that this work will provide a useful approach for understanding of the flexibility of CB[n] hosts and will also enable future measurement and standardization of ellipticity measurements of CB[n]s.more » « less
-
Abstract Inverse electron demand Diels–Alder reactions betweens‐tetrazines and strained dienophiles have numerous applications in fluorescent labeling of biomolecules. Herein, we investigate the effect of the dienophile on the fluorescence enhancement obtained upon reaction with a tetrazine‐quenched fluorophore and study the possible mechanisms of fluorescence quenching by both the tetrazine and its reaction products. The dihydropyridazine obtained from reaction with a strained cyclooctene shows a residual fluorescence quenching effect, greater than that exerted by the pyridazine arising from reaction with the analogous alkyne. Linear and ultrabroadband two‐dimensional electronic spectroscopy experiments reveal that resonance energy transfer is the mechanism responsible for the fluorescence quenching effect of tetrazines, whereas a mechanism involving more intimate electronic coupling, likely photoinduced electron transfer, is responsible for the quenching effect of the dihydropyridazine. These studies uncover parameters that can be tuned to maximize fluorogenic efficiency in bioconjugation reactions and reveal that strained alkynes are better reaction partners for achieving maximum contrast ratio.more » « less
