An official website of the United States government
To push upper boundaries of thermal conductivity in polymer composites, understanding of thermal transport mechanisms is crucial. Despite extensive simulations, systematic experimental investigation on thermal transport in polymer composites is limited. To better understand thermal transport processes, we design polymer composites with perfect fillers (graphite) and defective fillers (graphite oxide), using polyvinyl alcohol (PVA) as a matrix model. Measured thermal conductivities of ~1.38 ± 0.22 W m−1K−1in PVA/defective filler composites is higher than those of ~0.86 ± 0.21 W m−1K−1in PVA/perfect filler composites, while measured thermal conductivities in defective fillers are lower than those of perfect fillers. We identify how thermal transport occurs across heterogeneous interfaces. Thermal transport measurements, neutron scattering, quantum mechanical modeling, and molecular dynamics simulations reveal that vibrational coupling between PVA and defective fillers at PVA/filler interfaces enhances thermal conductivity, suggesting that defects in polymer composites improve thermal transport by promoting this vibrational coupling.
more »
« less
Naturally Derived Melanin Nanoparticle Composites with High Electrical Conductivity and Biodegradability
Abstract The development of electronic devices from naturally derived materials is of enormous scientific interest. Melanin, a dark protective pigment ubiquitous in living creatures, may be particularly valuable because of its ability to conduct charges both electronically and ionically. However, device applications are severely hindered by its relatively poor electrical properties. Here, the facile preparation of conductive melanin composites is reported in which melanin nanoparticles (MNPs), directly extracted from squid inks, form electrically continuous junctions by tight clustering in a poly(vinyl alcohol) (PVA) matrix. Prepared as freestanding films and patterned microstructures by a series of precipitation, dry casting, and post‐thermal annealing steps, the percolated composites show electrical conductivities as high as 1.17 ± 0.13 S cm−1at room temperature, which is the best performance yet obtained with biologically‐derived nanoparticles. Furthermore, the biodegradability of the MNP/PVA composites is confirmed through appetitive ingestion byZophobas morioslarvae (superworms). This discovery for preparing versatile biocomposites suggests new opportunities in functional material selections for the emerging applications of implantable, edible, green bioelectronics.
more »
« less
- Award ID(s):
- 1808048
- PAR ID:
- 10460307
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Particle & Particle Systems Characterization
- Volume:
- 36
- Issue:
- 10
- ISSN:
- 0934-0866
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Sepsis, whole‐body inflammation caused by the contamination of blood by bacteria and endotoxins, affects millions of patients annually with high mortality rates. A recent promising approach to treat sepsis involves the removal of bacteria and endotoxins using extracorporeal blood‐cleansing devices. However, poor specificity, slow recognition of pathogens, and high costs remain the main limitations. Here, the melanin, a biologically derived pigment, is reported for the rapid binding of bacteria and endotoxins from the contaminated blood . This novel approach utilizes the specific binding between Zn2+‐loaded melanin and bacteria/endotoxins with minimal nonspecific interactions with human blood components. Melanin contains various chemical functional groups that allow reversible chelation of metallic ions such as Zn2+via redox reactions. Zn2+enables rapid and specific binding with bacteria/endotoxins due to the strong electrostatic interactions between Zn2+and phosphate ions. The presence of various zinc‐binding proteins on the bacterial cell membrane further enhances the binding. The well‐known biocompatibility and low cost make melanin an ideal material to interface with human blood. Zn2+‐charged melanin can remove 90% ofE. coliand 100% of endotoxin in PBS and human blood. Zn2+‐melanin also demonstrated excellent hemocompatibility shown by protein adsorption, blood coagulation, and hemolysis tests.more » « less
-
ABSTRACT This study presents a novel, bio‐based polymer composite derived from tapioca starch and reinforced with jute fibers, designed for non‐load bearing structural applications. The developed composite demonstrated significant thermal stability, with a single decomposition reaction observed above 300°C via TGA, surpassing many synthetic polymers. DSC analysis revealed a glass transition temperature (Tg) of 69.55°C and notable thermal energy storage capability. Mechanical characterization, including three‐point bending, tensile, and compressive tests, confirmed effective fiber wetting and a tensile strength of 9 MPa for the composite. Furthermore, the composite exhibited mild electrical conductivity of 3.62 × 10−7 S/m. Structural characterizations (SEM, XRD, FTIR) revealed the presence of an N‐H bond, a functional group common in conductive polymers, suggesting its potential as a mild conductor. Density functional theory simulations provided further insights into the biopolymer's molecular structure. This research highlights the promising potential of tapioca starch composites for various engineering applications, particularly as sustainable packaging materials.more » « less
-
Hierarchically microstructured tri-axial poly(vinyl alcohol)/graphene nanoplatelet (PVA/GNP) composite fibers were fabricated using a dry-jet wet spinning technique. The composites with distinct PVA/GNPs/PVA phases led to highly oriented and evenly distributed graphene nanoplatelets (GNPs) as a result of molecular chain-assisted interfacial exfoliation. With a concentration of 3.3 wt% continuously aligned GNPs, the composite achieved a ∼73.5% increase in Young's modulus (∼38 GPa), as compared to the pure PVA fiber, and an electrical conductivity of ∼0.38 S m −1 , one of the best mechanical/electrical properties reported for polymer/GNP nanocomposite fibers. This study has broader impacts on textile engineering, wearable robotics, smart sensors, and optoelectronic devices.more » « less
-
Abstract Silk nanofibers (SNFs) from abundant sources are low‐cost and environmentally friendly. Combined with other functional materials, SNFs can help create bioelectronics with excellent biocompatibility without environmental concerns. However, it is still challenging to construct an SNF‐based composite with high conductivity, flexibility, and mechanical strength for all SNF‐based electronics. Herein, this work reports the design and fabrication of Ti3C2Tx‐silver@silk nanofibers (Ti3C2Tx‐Ag@SNF) composites with multi‐dimensional heterogeneous conductive networks using combined in situ growth and vacuum filtration methods. The ultrahigh electrical conductivity of Ti3C2Tx‐Ag@SNF composites (142959 S m−1) provides the kirigami‐patterned soft heaters with a rapid heating rate of 87 °C s−1. The multi‐dimensional heterogeneous network further allows the creation of electromagnetic interference shielding devices with an exceptionally high specific shielding effectiveness of 10,088 dB cm−1. Besides working as a triboelectric layer to harvest the mechanical energy and recognize the hand gesture, the Ti3C2Tx‐Ag@SNF composites can also be combined with an ionic layer to result in a capacitive pressure sensor with a high sensitivity of 410 kPa−1in a large range due to electronic‐double layer effect. The applications of the Ti3C2Tx‐Ag@SNF composites in recognizing human gestures and human‐machine interfaces to wirelessly control a trolley demonstrate the future development of all SNF‐based electronics.more » « less
