skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • Dopant‐Dependent Increase in Seebeck Coefficient and Electrical Conductivity in Blended Polymers with Offset Carrier Energies
Title: Dopant‐Dependent Increase in Seebeck Coefficient and Electrical Conductivity in Blended Polymers with Offset Carrier Energies
Abstract The strong and counterproductive interrelationship of thermoelectric parameters remains a bottleneck to improving thermoelectric performance, especially in polymer‐based materials. In this paper, a compositional range is investigated over which there is decoupling of the electrical conductivity and Seebeck coefficient, achieving increases in at least one of these two parameters while the other is maintained or slightly increased as well. This is done using an alkylthio‐substituted polythiophene (PQTS12) as additive in poly(bisdodecylquaterthiophene) (PQT12) with tetrafluorotetracyanoquinodimethane (F4TCNQ) and nitrosyl tetrafluoroborate (NOBF4) as dopants. The power factor increases two orders of magnitude with the PQTS12 additive at constant doping level. Using a second pair of polymers, poly(2,5‐bis(3‐dodecylthiophen‐2‐yl)thieno[3,2‐b]thiophene (PBTTTC12) and poly(2,5‐bis(3‐dodecylthiothiophen‐2‐yl)thieno[3,2‐b]thiophene, (PBTTTSC12), with higher mobilities, decoupling of the Seebeck coefficient and electrical conductivity is also observed and higher power factor is achieved. Distinguished from recently reported works, these two sets of polymers possess very closely offset carrier energy levels (0.05–0.07 eV), and the microstructure, assessed using grazing incidence X‐ray scattering, and mobility evaluated in field‐effect transistors, are not adversely affected by the blending. Experiments, calculations, and simulations are consistent with the idea that blending and doping polymers with closely spaced energy levels and compatible morphologies to promote carrier mobility favors increased power factors.  more » « less
Award ID(s):
1708245
PAR ID:
10460671
Author(s) / Creator(s):
 ;  ;  ;  ;  ;  ;  ;  ;  ;  
Publisher / Repository:
Wiley Blackwell (John Wiley & Sons)
Date Published:
Journal Name:
Advanced Electronic Materials
Volume:
5
Issue:
11
ISSN:
2199-160X
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; (, Advanced Functional Materials)
    Katz, Howard E (Ed.)
    Abstract Doping of organic semiconductors has served as an effective method to achieve high electrical conductivity and large thermoelectric power factor. This is of importance to the development of flexible/wearable electronics and green energy‐harvesting technologies. The doping impact of the Lewis acid tris (pentafluorophenyl) borane (BCF) on the thermoelectric performance of poly(2‐(4,4′‐bis(2‐methoxyethoxy)‐5′‐methyl‐[2,2′‐bithiophen]‐5‐yl)‐5‐methylthieno[3,2‐b]thiophene (pgBTTT), a thiophene‐based polymer featuring oligoethylene glycol side chains is investigated. Tetrafluorotetracyanoquinodimethane (F4TCNQ), a well‐established dopant, is utilized as a comparison; however, its inability to co‐dissolve with pgBTTT in less polar solvents hinders the attainment of higher doping levels. Consequently, a comparative study is performed on the thermoelectric behavior of pgBTTT doped with BCF and F4TCNQ at a very low doping level. Subsequent investigation is carried out with BCF at higher doping levels. Remarkably, at 50 wt% BCF doping level, the highest power factor of 223 ± 4 µW m−1K2is achieved with an electrical conductivity of 2180 ± 360 S cm−1and a Seebeck coefficient of 32 ± 1.3 µV K−1. This findings not only contribute valuable insights to the dopant interactions with oxygenated side chain polymers but also open up new avenues for high conductivity thermoelectric polymers in flexible electronic applications. 
    more » « less
  2. ; ; ; ; ; ; (, Advanced Electronic Materials)
    Abstract Since doped polymers require a charge‐neutralizing counter‐ion to maintain charge neutrality, tailored and high degrees of doping in organic semiconductors requires an understanding of the coupling between ionic and electronic carrier motion. A method of counter‐ion exchange is utilized using the polymeric semiconductor poly[2,5‐bis(3‐tetradecylthiophen‐2‐yl)thieno[3,2‐b]thiophene] ‐C14to deconvolute the effects of ionic/polaronic interactions with the electrical properties of doped semiconducting polymers. In particular, exchanging the counter‐ions of the dopant nitrosonium hexafluorophosphate enables investigation into the role of counter‐ion size from 5.2 to 8.2 Å in diameter. The orientational order of the polymeric crystallites is not affected with this exchange process while effectively modifying the counter‐ion distance to the charge carrier. Doped films have electrical conductivities of 320 S cm−1and are not sensitive to an increased ion‐polaron distance. It is posited that other factors dominate the electrical properties at a device scale, such as the morphology and presence of domain boundaries. Interestingly, the temperature stability of the doped film can be drastically improved with the use of counter‐ions containing less labile bonds. This platform serves as a unique way to retain the morphology of polymeric thin films while studying charge interactions at the local scale. 
    more » « less
  3. ; ; ; (, Advanced Functional Materials)
    Abstract The relationship between hole density and conductivity in electrochemically gated polythiophene films is examined. The films are  integrated into electrolyte‐gated transistors (EGTs), so that hole accumulations can be electrochemically modulated up to ≈0.4 holes per thiophene ring (hpr). Polythiophenes include poly(3‐alkylthiophenes) (P3ATs) with four different side chain lengths – butyl (P3BT), hexyl (P3HT), octyl (P3OT), or decyl (P3DT) – and poly[2,5‐bis(3‐dodecylthiophen‐2‐yl)thieno[3,2‐b]thiophene] (PBTTT) and poly(3,3′′′‐didodecyl[2,2′:5′,2′′:5′′,2′′′‐quaterthiophene]‐5,5′′′‐diyl) (PQT). Analysis of the drain current – gate voltage (ID–VG) and gate current – gate voltage (IG–VG) characteristics of the EGTs reveals that all six polythiophene semiconductors exhibited reversible conductivity peaks at 0.12 – 0.15 hpr. Conductivity is suppressed beyond ≈0.4 hpr.The maximum carrier mobilities of the P3AT semiconductors increase, and hysteresis of the conductivity peaks decreases, with increasing alkyl side‐chain length. PBTTT and PQT with reduced side chain densities exhibit the largest hysteresis but have higher hole mobilities. The results suggest that at ≈0.4 hpr, a polaronic sub‐band is filled in all cases. Filling of the sub‐band correlates with a collapse in the hole mobility. The side‐chain dependence of the peak conductivity and hysteresis further suggests that Coulombic ion‐carrier interactions are important in these systems. Tailoring ion‐carrier correlations is likely important for further improvements in transport properties of electrochemically doped polythiophenes. 
    more » « less
  4. ; ; ; ; ; ; ; ; ; ; et al (, Advanced Electronic Materials)
    Abstract Polymer semiconductors (PSCs) are essential active materials in mechanically stretchable electronic devices. However, many exhibit low fracture strain due to their rigid chain conformation and the presence of large crystalline domains. Here, a PSC/elastomer blend, poly[((2,6‐bis(thiophen‐2‐yl)‐3,7‐bis(9‐octylnonadecyl)thieno[3,2‐b]thieno[2′,3′:4,5]thieno[2,3‐d]thiophene)‐5,5′‐diyl)(2,5‐bis(8‐octyloctadecyl)‐3,6‐di(thiophen‐2‐yl)pyrrolo[3,4‐c]pyrrole‐1,4‐dione)‐5,5′‐diyl]] (P2TDPP2TFT4) and polystyrene‐block‐poly(ethylene‐ran‐butylene)‐block‐polystyrene (SEBS) are systematically investigated. Specifically, the effects of molecular weight of both SEBS and P2TDPP2TFT4 on the resulting blend morphology, mechanical, and electrical properties are explored. In addition to commonly used techniques, atomic force microscopy‐based nanomechanical images are used to provide additional insights into the blend film morphology. Opposing trends in SEBS‐induced aggregation are observed for the different P2TDPP2TFT4 molecular weights upon increasing the SEBS molecular weight from 87 to 276 kDa. Furthermore, these trends are seen in device performance trends for both molecular weights of P2TDPP2TFT4. SEBS molecular weight also has a substantial influence on the mesoscale phase separation. Strain at fracture increases dramatically upon blending, reaching a maximum value of 640% ± 20% in the blended films measured with film‐on‐water method. These results highlight the importance of molecular weight for electronic devices. In addition, this study provides valuable insights into appropriate polymer selections for stretchable semiconducting thin films that simultaneously possess excellent mechanical and electrical properties. 
    more » « less
  5. ; ; ; ; ; ; ; ; ; ; et al (, Advanced Materials)
    Abstract Molecular doping—the use of redox‐active small molecules as dopants for organic semiconductors—has seen a surge in research interest driven by emerging applications in sensing, bioelectronics, and thermoelectrics. However, molecular doping carries with it several intrinsic problems stemming directly from the redox‐active character of these materials. A recent breakthrough was a doping technique based on ion‐exchange, which separates the redox and charge compensation steps of the doping process. Here, the equilibrium and kinetics of ion exchange doping in a model system, poly(2,5‐bis(3‐alkylthiophen‐2‐yl)thieno(3,2‐b)thiophene) (PBTTT) doped with FeCl3and an ionic liquid, is studied, reaching conductivities in excess of 1000 S cm−1and ion exchange efficiencies above 99%. Several factors that enable such high performance, including the choice of acetonitrile as the doping solvent, which largely eliminates electrolyte association effects and dramatically increases the doping strength of FeCl3, are demonstrated. In this high ion exchange efficiency regime, a simple connection between electrochemical doping and ion exchange is illustrated, and it is shown that the performance and stability of highly doped PBTTT is ultimately limited by intrinsically poor stability at high redox potential. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email