An official website of the United States government
Quantum dots (QDs) offer several advantages in optoelectronics such as easy solution processing, strong light absorption and size tunable direct bandgap. However, their major limitation is their poor film mobility and short diffusion length (<250 nm). This has restricted the thickness of QD film to ∼200–300 nm due to the restriction that the diffusion length imposes on film thickness in order to keep efficient charge collection. Such thin films result in a significant decrease in quantum efficiency for λ > 700 nm in QDs photodetector and photovoltaic devices, causing a reduced photoresponsivity and a poor absorption towards the near-infrared part of the sunlight spectrum. Herein, we demonstrate 1 μm thick QDs photodetectors with intercalated graphene charge collectors that avoid the significant drop of quantum efficiency towards λ > 700 nm observed in most QD optoelectronic devices. The 1 μm thick intercalated QD films ensure strong light absorption while keeping efficient charge extraction with a quantum efficiency of 90%–70% from λ = 600 nm to 950 nm using intercalated graphene layers as charge collectors with interspacing distance of 100 nm. We demonstrate that the effect of graphene on light absorption is minimal. We achieve a time-modulation response of <1 s. We demonstrate that this technology can be implemented on flexible PET substrates, showing 70% of the original performance after 1000 times bending test. This system provides a novel approach towards high-performance photodetection and high conversion photovoltaic efficiency with quantum dots and on flexible substrates.
more »
« less
Improved Charge Extraction Beyond Diffusion Length by Layer‐by‐Layer Multistacking Intercalation of Graphene Layers inside Quantum Dots Films
Abstract Charge collection is critical in any photodetector or photovoltaic device. Novel materials such as quantum dots (QDs) have extraordinary light absorption properties, but their poor mobility and short diffusion length limit efficient charge collection using conventional top/bottom contacts. In this work, a novel architecture based on multiple intercalated chemical vapor deposition graphene monolayers distributed in an orderly manner inside a QD film is studied. The intercalated graphene layers ensure that at any point in the absorbing material, photocarriers will be efficiently collected and transported. The devices with intercalated graphene layers have superior quantum efficiency over single‐bottom graphene/QD devices, overcoming the known restriction that the diffusion length imposes on film thickness. QD film with increased thickness shows efficient charge collection over the entire λ ≈ 500–1000 nm spectrum. This architecture could be applied to boost the performance of other low‐cost materials with poor mobility, allowing efficient collection for films thicker than their diffusion length.
more »
« less
- Award ID(s):
- 1710472
- PAR ID:
- 10461149
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Materials
- Volume:
- 31
- Issue:
- 14
- ISSN:
- 0935-9648
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Hybrid graphene (Gr)–quantum dot (QD) photodetectors have shown ultrahigh photoresponsivity combining the strong light absorption of QDs with the high mobility of Gr. QDs absorb light and generate photocarriers that are efficiently transported by Gr. Typically, hybrid PbS–QD/graphene photodetectors operate by transferring photogenerated holes from the QDs to Gr while photoelectrons stay in the QDs inducing a photogating mechanism that achieves a responsivity of 6 × 107A W−1. However, despite such high gain, these systems have poor charge collection with quantum efficiency below 25%. Herein, a ZnO intermediate layer (PbS‐QD/ZnO/Gr) is introduced to improve charge collection by forming an effective p‐n PbS‐ZnO junction driving the electrons to the ZnO layer and then to Gr. This improves the photoresponsivity of the devices by nearly an order of magnitude with respect to devices without ZnO. Charge transfer to Gr is demonstrated by monitoring the change in Fermi level under illumination for conventional PbS‐QD/Gr and for ZnO intermediate PbS‐QD/ZnO/Gr devices. These results improve the capabilities of hybrid QD/Gr configurations for optoelectronic devices.more » « less
-
Abstract Hybrid photodetectors with 2D materials and quantum dots (QDs) offer new opportunities for spectral detection given their high mobilities and spectral tunability, respectively. Herein, the study presents a novel architecture of alternating PbS QDs with graphene monolayers positioned at different depths and with independent contacts. This geometry enables the probing of the photocurrent depth profile and therefore of different spectral bands. The study realizes devices with up to five graphene layers and five QD layers intercalated, using only one type of QDs (Single‐Bandgap devices) with an exciton absorption peak at 920 nm, as well as devices with different types of QDs (Multi‐Bandgap devices) with exciton peaks at 850, 1190, and 1350 nm. Since the absorption depth and photoresponse is wavelength dependent, each graphene has a different spectral response, which opens the path for spectral analysis. As expected, it is observed that top graphene layers have stronger response than deeper graphene layers, especially for short wavelengths. However, for the case of Multi‐Bandgap devices, a negative photoresponse coefficient is even observed for longer wavelengths, showing stronger response for deeper layers than for top layers. This intercalated architecture can be used for compact multispectral photodetection without any diffractive or beam splitting component.more » « less
-
Tong, Xin; Wu, Jiang; Wang, Zhiming (Ed.)Colloidal semiconductor quantum dot/graphene van der Waals heterostructure nanohybrids are emerging technologies for photodetection. These nanohybrids combine the advantages of the enhanced light-matter interaction and spectral tunability of quantum dots (QDs) and superior charge mobility in graphene, providing an affordable alternative for uncooled photodetectors with high gain or external quantum efficiency in a wide spectral range. In particular, the interfacing of QDs with high-mobility graphene as a charge transport pathway has provided an effective resolution to the critical issue of charge transport in QD-only photodetectors stemming from the low charge mobility associated with both QD surface defect states and QD-QD junctions. Furthermore, the achieved capability in industrial-scale fabrication of graphene, colloidal QDs, and QD/graphene nanohybrids has motivated efforts in researches of focal plane arrays that are expected to be not only high performance and low cost but also lightweight, flexible, and wearable. This chapter aims to provide an up-to-date review of the recent progress made in the research of QD/graphene nanohybrid photodetectors, together with a discussion on the challenges remaining and perspective in future research and development to make QD/graphene nanohybrids competitive for commercialization.more » « less
-
Fulop, Gabor F.; Kimata, Masafumi; Zheng, Lucy; Andresen, Bjørn F.; Miller, John Lester (Ed.)Colloidal semiconductor quantum dots/graphene van der Waals (vdW) heterojunctions take advantages of the enhanced light-matter interaction and spectral tenability of quantum dots (QDs) and superior charge mobility in graphene, providing a promising alternative for uncooled infrared photodetectors with a gain or external quantum efficiency up to 1010. In these QD/graphene vdW heterostructures, the QD/graphene interface plays a critical role in controlling the optoelectronic process including exciton dissociation, charge injection and transport. Specifically, charge traps at the vdW interface can increase the noise, reduce the responsivity and response speed. This paper highlight our recent progress in engineering the vdW heterojunction interface towards more efficient charge transfer for higher photoresponsivity, D* and response speed. These results illustrate that the importance in vdW heterojunction interface engineering in QD/graphene photodetectors which may provide a promising pathway for low-cost, printable and flexible infrared detectors and imaging systems.more » « less
