An official website of the United States government
Tandem photovoltaic (PV) cells with higher efficiency limits than current market dominated crystalline silicon PV devices are poised to be the next generation of solar cells. In this study we focus on analysis of perovskite/Cu(In x Ga 1-x )Se 2 tandem solar cells in the context of real-world conditions. Using material properties and the most recently updated atmospheric data we simulate the device energy yield for locations with different climate conditions. We use the resultant data in calculating module levelized cost and analyze the conditions under which using different forms of tracking become the cost-effective approach at each location.
more »
« less
Printed assemblies of microscale triple‐junction inverted metamorphic GaInP/GaAs/InGaAs solar cells
Abstract Inverted metamorphic (IMM) multijunction solar cells represent a promising material platform for ultrahigh efficiency photovoltaic systems (UHPVs) with a clear pathway to beyond 50% efficiency. The conventional device processing of IMM solar cells, however, typically involves wafer bonding of a centimeter‐scale die and destructive substrate removal, thereby imposing severe restrictions in achievable cell size, type of module substrate, spatial layout, as well as cost effectiveness. Here, we report material design and fabrication strategies for microscale triple‐junction IMM (3J IMM) Ga0.51In0.49P/GaAs/In0.26Ga0.74As solar cells that can overcome these difficulties. Specialized schemes of delineation and undercut etching enable the defect‐free release of microscale IMM solar cells and printed assemblies on a glass substrate in a manner that preserves the growth substrate, where efficiencies of 27.3% and 33.9% are demonstrated at simulated AM1.5D one‐ and 351 sun illumination, respectively. A composite carrier substrate where released IMM microcells are formed in fully functional, print‐ready configurations allows high‐throughput transfer printing of individual IMM microcells in a programmable spatial layout on versatile choices of module substrate, all desired for CPV applications.
more »
« less
- Award ID(s):
- 1707169
- PAR ID:
- 10461182
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Progress in Photovoltaics: Research and Applications
- Volume:
- 27
- Issue:
- 6
- ISSN:
- 1062-7995
- Page Range / eLocation ID:
- p. 520-527
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Nature is capable of storing solar energy in chemical bonds via photosynthesis through a series of C–C, C–O and C–N bond-forming reactions starting from CO2and light. Direct capture of solar energy for organic synthesis is a promising approach. Lead (Pb)-halide perovskite solar cells reach 24.2% power conversion efficiency, rendering perovskite a unique type material for solar energy capture. We argue that photophysical properties of perovskites already proved for photovoltaics, also should be of interest in photoredox organic synthesis. Because the key aspects of these two applications are both relying on charge separation and transfer. Here we demonstrated that perovskites nanocrystals are exceptional candidates as photocatalysts for fundamental organic reactions, for example C–C, C–N and C–O bond-formations. Stability of CsPbBr3in organic solvents and ease-of-tuning their bandedges garner perovskite a wider scope of organic substrate activations. Our low-cost, easy-to-process, highly-efficient, air-tolerant and bandedge-tunable perovskites may bring new breakthrough in organic chemistry.more » « less
-
Abstract Polymer nanocomposite coatings of solar photovoltaic cells that absorb solar ultraviolet (UV) radiation and convert it into visible and near-infrared (NIR) light can increase the operational lifetime and the energy efficiency of the cells. We report a polymer nanocomposite spectrum converting layer (SCL) made of colorless polyimide CORIN impregnated with the nanoparticles (NPs) of fluoride NaYF4doped with three-valent ions of Europium at a molar concentration of 60%. The NPs were the nanocrystals (179 ± 35 nm in size) in thermally stable hexagonal beta-phase. The visible-NIR photoluminescence quantum yield of the nano-powder was ∼69%. The SCLs were applied using the open-air multi-beam multi-target pulsed laser deposition method to silicon heterojunction (SHJ), copper-indium-gallium-selenide (CIGS), and inverted metamorphic multijunction (IMM) solar cells. The cells were exposed to UV radiation from a 365 nm light emitting diode. TheI–Vcharacteristics of the cells were measured with a solar simulator using AM0 filter. The proposed SCLs improved the UV stability of all three types of the cells: the power degradation of SHJs and IMMs cells was stopped or slightly reversed and the degradation rate of CIGSs decreased by ∼25%. The proposed SCLs have great commercial potential, especially for applications to space power.more » « less
-
Abstract Here, high power flexible Schottky barrier diodes (SBDs) are demonstrated on a plastic substrate using single crystalline β‐Ga2O3nanomembranes (NMs). In order to realize flexible high power β‐Ga2O3SBDs, sub‐micron thick freestanding β‐Ga2O3NMs are created from a bulk β‐Ga2O3substrate and transfer‐printed onto the plastic substrate via a microtransfer printing method. It is revealed that the material property of β‐Ga2O3NMs such as crystal structure, electron affinity, and bandgap remains unchanged compared with its bulk properties. Flexible β‐Ga2O3SBDs exhibit the record high critical breakdown field strength (Ec) of 1.2 MV cm−1in the flat condition and 1.07 MV cm−1ofEcunder the bending condition. Overall, flexible β‐Ga2O3SBDs offer great promise for future flexible energy convergence systems and are expected to provide a much larger and more versatile platform to address a broader range of high‐performance flexible applications.more » « less
-
Abstract Antimony selenide (Sb2Se3) has excellent directional optical and electronic behaviors due to its quasi‐1D nanoribbons structure. The photovoltaic performance of Sb2Se3solar cells largely depends on the orientation of the nanoribbons. It is desired to grow these Sb2Se3ribbons normal to the substrate to enhance photoexcited carrier transport. Therefore, it is necessary to develop a strategy for the vertical growth of Sb2Se3nanoribbons to achieve high‐efficiency solar cells. Since antimony sulfide (Sb2S3) and Sb2Se3are from the same space group (Pbnm) and have the same crystal structure, herein an ultrathin layer (≈20 nm) of Sb2S3has been used to assist the vertical growth of Sb2Se3nanoribbons to improve the overall efficiency of Sb2Se3solar cell. The Sb2S3thin layer deposited by the hydrothermal process helps the Sb2Se3ribbons grow normal to the substrate and increases the efficiency from 5.65% to 7.44% through the improvement of all solar cell parameters. This work is expected to open a new direction to tailor the Sb2Se3grain growth and further develop the Sb2Se3solar cell in the future.more » « less
