skip to main content


Title: Nonvolatile Rewritable Photomemory Arrays Based on Reversible Phase‐Change Perovskite for Optical Information Storage
Abstract

The high transmission speed of optical signals and their application in optical computation have created a growing demand for photon‐programmed memory devices. Rather than using electrical pulses to store data in one of two states, the photomemory (PM) devices exploit the optical stimulation to store the light information. In this work, the application of a nonvolatile rewritable PM array using the photochromic inorganic perovskite CsPbIBr2grown by a vapor‐deposition process is demonstrated. Reversible phase transitions between orthorhombic (δ) and cubic (α) phases are achieved in CsPbIBr2films through laser‐induced heat and moisture exposure. The PM pixels in an optically absorbing perovskite phase exhibit ≈50‐fold photoresponsivity as large as those in a transparent‐colored non‐perovskite phase. Storing optical data are achieved by heating pixels through a near‐infrared laser, while moisture exposure is used to erase the stored information. The nonvolatile PM array exhibits great write‐read‐erase cycle endurance and data retention capability without obvious performance degradation after storage in air for one week. This work demonstrates the promising application of vapor‐deposited inorganic perovskite for optical information storage and the unique potential of them for use in optical switches, tunable metasurfaces, and many other applications.

 
more » « less
Award ID(s):
1807397 1836500
NSF-PAR ID:
10461233
Author(s) / Creator(s):
 ;  ;  ;  ;  
Publisher / Repository:
Wiley Blackwell (John Wiley & Sons)
Date Published:
Journal Name:
Advanced Optical Materials
Volume:
7
Issue:
18
ISSN:
2195-1071
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. Abstract

    In this work, we consider a type of magnetic memory where information is encoded into the mutual arrangement of magnets. The device is an active ring circuit comprising magnetic and electric parts connected in series. The electric part includes a broadband amplifier, phase shifters, and attenuators. The magnetic part is a mesh of magnonic waveguides with magnets placed on the waveguide junctions. There are amplitude and phase conditions for auto-oscillations to occur in the active ring circuit. The frequency(s) of the auto-oscillation and spin wave propagation path(s) in the magnetic part depends on the mutual arrangement of magnets in the mesh. The propagation path is detected with a set of power sensors. The correlation between circuit parameters and spin wave path is the basis of memory operation. The combination of input/output switches connecting electric and magnetic parts and electric phase shifters constitute the memory address. The output of the power sensors is the memory state. We present experimental data on the proof-of-the-concept experiments on the prototype with three magnets placed on top of a single-crystal yttrium iron garnet Y3Fe2(FeO4)3(YIG) film. There are three selected places for the magnets to be placed. There is a variety of spin wave propagation paths for each configuration of magnets. The results demonstrate a robust operation with an On/Off ratio for path detection exceeding 35 dB at room temperature. The number of possible magnet arrangements scales factorially with the size of the magnetic part. The number of possible paths per one configuration scales factorial as well. It makes it possible to drastically increase the data storage density compared to conventional memory devices. Magnonic combinatorial memory with an array of 100 × 100 magnets can store all information generated by humankind. Physical limits and constraints are also discussed.

     
    more » « less
  2. Ferroelectric field‐effect transistors (FeFETs) employing graphene on inorganic perovskite substrates receive considerable attention due to their interesting electronic and memory properties. They are known to exhibit an unusual hysteresis of electronic transport that is not consistent with the ferroelectric polarization hysteresis and is previously shown to be associated with charge trapping at graphene–ferroelectric interface. Here, an electrical measurement scheme that minimizes the effect of charge traps and reveals the polarization‐dependent hysteresis of electronic transport in graphene–Pb(Zr,Ti)O3FeFETs is demonstrated. Observation of the polarization‐dependent conductivity hysteresis is important for the fundamental understanding of the interplay between the ferroelectric polarization and charge carriers in graphene. It is also important for practical memory applications because this hysteresis emulates the operation of nonvolatile memories and reveals the range of ON and OFF currents that can be achieved in long term data storage. It is demonstrated that this measurement scheme can be used to optimize the memory performance of graphene–PZT FeFETs that can exhibit nonvolatile time‐independent ON/OFF ratios of over 5. The described measurement technique can potentially be used in the studies of kinetics of charge trap dissipation, polarization‐dependent properties, and memory performance of FeFET devices comprising other 2D materials and various ferroelectric substrates.

     
    more » « less
  3. Abstract

    Perovskite photovoltaic ABX3systems are being studied due to their high energy‐conversion efficiencies with current emphasis placed on pure inorganic systems. In this work, synchrotron single‐crystal diffraction measurements combined with second harmonic generation measurements reveal the absence of inversion symmetry below room temperature in CsPbBr3. Local structural analysis by pair distribution function and X‐ray absorption fine structure methods are performed to ascertain the local ordering, atomic pair correlations, and phase evolution in a broad range of temperatures. The currently accepted space group assignments for CsPbBr3are found to be incorrect in a manner that profoundly impacts physical properties. New assignments are obtained for the bulk structure: (above ≈410 K),P21/m(between ≈300 K and ≈410 K), and the polar groupPm(below ≈300 K), respectively. The newly observed structural distortions exist in the bulk structure consistent with the expectation of previous photoluminescence and Raman measurements. High‐pressure measurements reveal multiple low‐pressure phases, one of which exists as a metastable phase at ambient pressure. This work should help guide research in the perovskite photovoltaic community to better control the structure under operational conditions and further improve transport and optical properties.

     
    more » « less
  4. Abstract The Cosmology Large Angular Scale Surveyor (CLASS) is a four-telescope array observing the largest angular scales (2≲ ℓ ≲ 200) of the cosmic microwave background (CMB) polarization. These scales encode information about reionization and inflation during the early universe. The instrument stability necessary to observe these angular scales from the ground is achieved through the use of a variable-delay polarization modulator as the first optical element in each of the CLASS telescopes. Here, we develop a demodulation scheme used to extract the polarization timestreams from the CLASS data and apply this method to selected data from the first 2 yr of observations by the 40 GHz CLASS telescope. These timestreams are used to measure the 1/ f noise and temperature-to-polarization ( T → P ) leakage present in the CLASS data. We find a median knee frequency for the pair-differenced demodulated linear polarization of 15.12 mHz and a T → P leakage of <3.8 × 10 −4 (95% confidence) across the focal plane. We examine the sources of 1/ f noise present in the data and find the component of 1/ f due to atmospheric precipitable water vapor (PWV) has an amplitude of 203 ± 12 μ K RJ s for 1 mm of PWV when evaluated at 10 mHz; accounting for ∼17% of the 1/ f noise in the central pixels of the focal plane. The low levels of T → P leakage and 1/ f noise achieved through the use of a front-end polarization modulator are requirements for observing of the largest angular scales of the CMB polarization by the CLASS telescopes. 
    more » « less
  5. The traditional von Neumann architecture limits the increase in computing efficiency and results in massive power consumption in modern computers due to the separation of storage and processing units. The novel neuromorphic computation system, an in-memory computing architecture with low power consumption, is aimed to break the bottleneck and meet the needs of the next generation of artificial intelligence (AI) systems. Thus, it is urgent to find a memory technology to implement the neuromorphic computing nanosystem. Nowadays, the silicon-based flash memory dominates non-volatile memory market, however, it is facing challenging issues to achieve the requirements of future data storage device development due to the drawbacks, such as scaling issue, relatively slow operation speed, and high voltage for program/erase operations. The emerging resistive random-access memory (RRAM) has prompted extensive research as its simple two-terminal structure, including top electrode (TE) layer, bottom electrode (BE) layer, and an intermediate resistive switching (RS) layer. It can utilize a temporary and reversible dielectric breakdown to cause the RS phenomenon between the high resistance state (HRS) and the low resistance state (LRS). RRAM is expected to outperform conventional memory device with the advantages, notably its low-voltage operation, short programming time, great cyclic stability, and good scalability. Among the materials for RS layer, indium gallium zinc oxide (IGZO) has shown attractive prospects in abundance and high atomic diffusion property of oxygen atoms, transparency. Additionally, its electrical properties can be easily modulated by controlling the stoichiometric ratio of indium and gallium as well as oxygen potential in the sputter gas. Moreover, since the IGZO can be applied to both the thin-film transistor (TFT) channel and RS layer, it has a great potential for fully integrated transparent electronics application. In this work, we proposed amorphous transparent IGZO-based RRAMs and investigated switching behaviors of the memory cells prepared with different top electrodes. First, ITO was choosing to serve as both TE and BE to achieve high transmittance. A multi-target magnetron sputtering system was employed to deposit all three layers (TE, RS, BE layers) on glass substrate. I-V characteristics were evaluated by a semiconductor parameter analyzer, and the bipolar RS feature of our RRAM devices was demonstrated by typical butterfly curves. The optical transmission analysis was carried out via a UV-Vis spectrometer and the average transmittance was around 80% out of entire devices in the visible-light wavelength range, implying high transparency. We adjusted the oxygen partial pressure during the sputtering of IGZO to optimize the property because the oxygen vacancy concentration governs the RS performance. Electrode selection is crucial and can impact the performance of the whole device. Thus, Cu TE was chosen for our second type of device because the diffusion of Cu ions can be beneficial for the formation of the conductive filament (CF). A ~5 nm SiO 2 barrier layer was employed between TE and RS layers to confine the diffusion of Cu into the RS layer. At the same time, this SiO 2 inserting layer can provide an additional interfacial series resistance in the device to lower the off current, consequently, improve the on/off ratio and whole performance. Finally, an oxygen affinity metal Ti was selected as the TE for our third type of device because the concentration of the oxygen atoms can be shifted towards the Ti electrode, which provides an oxygengettering activity near the Ti metal. This process may in turn lead to the formation of a sub-stoichiometric region in the neighboring oxide that is believed to be the origin of better performance. In conclusion, the transparent amorphous IGZO-based RRAMs were established. To tune the property of RS layer, the sputtering conditions of RS were varied. To investigate the influence of TE selections on switching performance of RRAMs, we integrated a set of TE materials, and a barrier layer on IGZO-based RRAM and compared the switch characteristics. Our encouraging results clearly demonstrate that IGZO is a promising material in RRAM applications and breaking the bottleneck of current memory technologies. 
    more » « less