This article develops a new framework of adaptive actuator failure compensation control for cooperative manipulator systems with parameter uncertainties in addition to actuator failures, and designs and analyzes effective actuator failure compensation schemes for such robotic systems. The new adaptive control design uses an integration of multiple individual failure compensators and direct adaptation to handle various types of uncertainties in such robotic systems. The design can also be used for concurrent actuator failure cases, to expand the capability of adaptive actuator failure compensation. With a complete proof and performance analysis, it is shown that the proposed control scheme guarantees the desired closed‐loop stability and asymptotic output tracking, despite actuator failures whose patterns, time instants and values are all unknown. Simulation results of a benchmark cooperative manipulator system are presented to verify the desired control performance of the system with both typical constant and square‐wave actuator failure signals.
This paper addresses a new adaptive output tracking problem in the presence of uncertain plant dynamics and uncertain sensor failures. A new unified nominal state‐feedback control law is developed to deal with various sensor failures, which is directly constructed by state sensor outputs. Such a new state‐feedback compensation control law is able to ensure the desired plant‐model matching properties under different failure patterns. Based on the nominal compensation control design, a new adaptive compensation control scheme is proposed, which guarantees closed‐loop signal boundedness and asymptotic output tracking. The new adaptive compensation scheme not only expands the sensor failures types that the system could tolerate but also avoids some signal processing procedures that the traditional fault‐tolerant control techniques are forced to encounter. A complete stability analysis and a representative simulation study are conducted to evaluate the effectiveness of the proposed adaptive compensation control scheme.
more » « less- NSF-PAR ID:
- 10462606
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- International Journal of Adaptive Control and Signal Processing
- Volume:
- 33
- Issue:
- 1
- ISSN:
- 0890-6327
- Page Range / eLocation ID:
- p. 130-156
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Summary -
This paper is focused on the output tracking control problem of a wave equation with both matched and unmatched boundary uncertainties. An adaptive boundary feedback control scheme is proposed by utilizing radial basis function neural networks (RBF NNs) to deal with the effect of system uncertainties. Specifically, two RBF NN models are first developed to approximate the matched and unmatched system uncertain dynamics respectively. Based on this, an adaptive NN control scheme is derived, which consists of: (i) an adaptive boundary feedback controller embedded by the NN model approximating the matched uncertainty, for rendering stable and accurate tracking control; and (ii) a reference model embedded by the NN model approximating the unmatched uncertainty, for generating a prescribed reference trajectory. Rigorous analysis is performed using the Lyapunov theory and the C0-semigroup theory to prove that our proposed control scheme can guarantee closed-loop stability and wellposedness. Simulation study has been conducted to demonstrate effectiveness of the proposed approach.more » « less
-
more » « less
Summary We present a certainty equivalence‐based adaptive boundary control scheme with a regulation‐triggered batch least‐squares identifier, for a heterodirectional transport partial differential equation‐ordinary differential equation (PDE‐ODE) system where the transport speeds of both transport PDEs are unknown. We use a nominal controller which is fed piecewise‐constant parameter estimates from an event‐triggered parameter update law that applies a least‐squares estimator to data “batches” collected over time intervals between the triggers. A parameter update is triggered by an observed growth in the norm of the PDE state. The proposed triggering‐based adaptive control guarantees: (1) the absence of a Zeno phenomenon; (2) parameter estimates are convergent to the true values in finite time (from most initial conditions); (3) exponential regulation of the plant states to zero. The effectiveness of the proposed design is verified by a numerical example.
-
null (Ed.)Position tracking control in three spatial dimensions in the presence of unknown or uncertain dynamics, is applicable to unmanned aerial, ground, (under)water and space vehicles. This work gives a new approach to model-free position tracking control by designing an extended state observer to estimate the states and the uncertain dynamics, with guaranteed accuracy of estimates. The estimated states and uncertainties can be used in a control scheme in real-time for position tracking control. The uncertainty (disturbance input) estimate is provided by an extended state observer (ESO) that is finite-time stable (FTS), to provide accuracy and robustness. The ideas of homogeneous vector fields and real-valued functions are utilized for the ESO design and to prove FTS. The estimated disturbance is then utilized for compensation of this uncertainty in real-time, and to enhance the stability and robustness of the feedback tracking control scheme.more » « less
-
more » « less
Summary Scenario‐based model predictive control (MPC) methods can mitigate the conservativeness inherent to open‐loop robust MPC. Yet, the scenarios are often generated offline based on worst‐case uncertainty descriptions obtained
a priori , which can in turn limit the improvements in the robust control performance. To this end, this paper presents a learning‐based, adaptive‐scenario‐tree model predictive control approach for uncertain nonlinear systems with time‐varying and/or hard‐to‐model dynamics. Bayesian neural networks (BNNs) are used to learn a state‐ and input‐dependent description of model uncertainty, namely the mismatch between a nominal (physics‐based or data‐driven) model of a system and its actual dynamics. We first present a new approach for training robust BNNs (RBNNs) using probabilistic Lipschitz bounds to provide a less conservative uncertainty quantification. Then, we present an approach to evaluate the credible intervals of RBNN predictions and determine the number of samples required for estimating the credible intervals given a credible level. The performance of RBNNs is evaluated with respect to that of standard BNNs and Gaussian process (GP) as a basis of comparison. The RBNN description of plant‐model mismatch with verified accurate credible intervals is employed to generate adaptive scenarios online for scenario‐based MPC (sMPC). The proposed sMPC approach with adaptive scenario tree can improve the robust control performance with respect to sMPC with a fixed, worst‐case scenario tree and with respect to an adaptive‐scenario‐based MPC (asMPC) using GP regression on a cold atmospheric plasma system. Furthermore, closed‐loop simulation results illustrate that robust model uncertainty learning via RBNNs can enhance the probability of constraint satisfaction of asMPC.
