Single crystal perovskite microplates are fundamentally and technologically very important to developing high‐order (
The development of the photostable higher‐order multiphoton‐excited (MPE) upconversion single microcrystalline material is fundamentally and technologically important, but very challenging. Here, up to five‐photon excited luminescence in a host–guest metal–organic framework (MOF) and perovskite quantum dot (QD) hybrid single crystal ZJU‐28⊃MAPbBr3is shown via an in situ growth approach. Such a MOF strategy not only results in a high QD loading concentration, but also significantly diminishes the aggregation‐caused quenching (ACQ) effect, provides effective surface passivation, and greatly reduces the contact of the QDs with the external bad atmosphere due to the confinement effect and protection of the framework. These advantages make the resulting ZJU‐28⊃MAPbBr3single crystals possess high PLQY of ≈51.1%, a high multiphoton action cross‐sections that can rival the current highest record (measured in toluene solution), and excellent photostability. These findings liberate the excellent luminescence and nonlinear optical properties of perovskite QDs from the solution system to the solid single‐crystal system, which provide a new avenue for the exploitation of high‐performance multiphoton excited hybrid single microcrystal for future optoelectronic and micro–nano photonic integration applications.
more » « less- NSF-PAR ID:
- 10462812
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Materials
- Volume:
- 31
- Issue:
- 6
- ISSN:
- 0935-9648
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
Abstract n ≥ 3) multiphoton excitation. This study reports the preparation of high‐quality single crystal perovskite microplates through the controlled release of lead ions from the confined species within a metal–organic framework. The resulting free‐standing MAPbBr3(MA = CH3NH3+) and CsPbBr3single crystals of rectangular microplates exhibit excellent multiphoton excitation behaviors, as demonstrated in their five‐photon‐excited photoluminescence and three‐photon‐pumped stimulated emission with the threshold of 159 mJ cm−2, providing the promise of exploring high‐quality single crystal perovskite microplates for functional optoelectronic and photonics applications. -
Abstract The development of in situ growth methods for the fabrication of high‐quality perovskite single‐crystal thin films (SCTFs) directly on hole‐transport layers (HTLs) to boost the performance of optoelectronic devices is critically important. However, the fabrication of large‐area high‐quality SCTFs with thin thickness still remains a significant challenge due to the elusive growth mechanism of this process. In this work, the influence of three key factors on in situ growth of high‐quality large‐size MAPbBr3SCTFs on HTLs is investigated. An optimal “sweet spot” is determined: low interface energy between the precursor solution and substrate, a slow heating rate, and a moderate precursor solution concentration. As a result, the as‐obtained perovskite SCTFs with a thickness of 540 nm achieve a record area to thickness ratio of 1.94 × 104 mm, a record X‐ray diffraction peak full width at half maximum of 0.017°, and an ultralong carrier lifetime of 1552 ns. These characteristics enable the as‐obtained perovskite SCTFs to exhibit a record carrier mobility of 141 cm2V−1s−1and good long‐term structural stability over 360 days.
-
The current understanding of the crystallization, morphology evolution, and phase stability of wide‐bandgap hybrid perovskite thin films is very limited, as much of the community's focus is on lower bandgap systems. Herein, the crystallization behavior and film formation of a wide and tunable bandgap MAPbBr3
− x Clx system are investigated, and its formation and phase stability are contrasted to the classical MAPbI3− x Brx case. A multiprobe in situ characterization approach consisting of synchrotron‐based grazing incidence wide‐angle X‐ray scattering and laboratory‐based time‐resolved UV–Vis absorbance measurements is utilized to show that all wide‐bandgap perovskite compositions of MAPbBr3− x Clx studied (0 <x < 3) crystallize the same way: the perovskite phase forms directly from the colloidal sol state and forms a solid film in the cubic structure. This results in significantly improved alloying and phase stability of these compounds compared with MAPbI3− x Brx systems. The phase transformation pathway is direct and excludes solvated phases, in contrast to methylammonium lead iodide (MAPbI3). The films benefit from antisolvent dripping to overcome the formation of discontinuous layers and enable device integration. Pin‐hole‐free MAPbBr3− x Clx hybrid perovskite thin films with a tunable bandgap are, thus, integrated into working single‐junction solar cell devices and achieve a tunable open‐circuit voltage as high as 1.6 V. -
Abstract Hybrid graphene and quantum dots (QDs) photodetectors merge the excellent conductivity and ambipolar electric field sensitivity of graphene, with the unique properties of QDs. The photoresponsivity of these devices depends strongly on the charge transfer at the graphene/QDs interface. Here 1‐pyrene butyric acid (PBA)‐coated PbS QDs with single layer graphene (SLG) are used to investigate the effect of pyrene as a π–π mediator to enhance charge transfer at the SLG/QDs junction under illumination. The surface chemistry at the QD–QD and SLG/QD interface is studied with the conventional tetrabutylammonium iodide (TBAI) QD linker. The hybrid SLG/QD photodetectors with PBA as a SLG‐QD linker demonstrate a photoresponse up to 30% higher than that recorded for devices where only TBAI is used, due to the strong electron coupling between SLG and QDs. Transconductance measurements show that PBA provokes electron depletion in SLG ascribed to the tendency to delocalize the QDs holes, favoring their transfer to SLG. This surface ligand is found to improve the interaction between the QDs light absorbers and the SLG charge collector, leading to an increased photodetection response. This demonstrates that ligand engineering can enhance charge dynamics and boost the performance of the hybrid device.
-
Proper derivation of CH3NH3PbX3(MAPbX3; where X = Cl−, Br−, I−) optical constants is a critical step toward the development of high‐performance perovskite devices. To date, the optical dispersions at all wavelengths have been inconsistently characterized by under‐approximating or omitting anomalous spectral features. Herein, a rigorous optical dispersion data analysis of single‐crystal MAPbBr3involving variable‐angle spectroscopic ellipsometry data appended with transmission intensity data is presented. This approach yields a more robust derivation of the refractive index and extinction coefficient for both anomalous (absorptance) and normal (no absorptance) optical dispersion regimes. Using the derived optical constants, illustrative modeled perovskite solar cell device designs are presented in relation to nonrealistic designs prepared using representative optical constants reported in the literature. In comparison, the derived optical constants enables the modeling of layer thicknesses to maximize absorption by the active layer (MAPbBr3) and minimize parasitic optical absorptance by the nonactive layers at broad angles of incidence (≈0°–70°). This robust derivation of MAPbBr3optical constants is expected to impact the optical dispersion data analysis of all perovskite analogs and expedite targeted development of, for example, solar cell, light‐emitting diode, photo‐ and X‐ray/γ‐ray detector, and laser system technologies.