An official website of the United States government
Abundant heterogeneity has been documented on faults in nature across a wide range of length scales, including structural, mineralogical, and roughness variations. The role of complex heterogeneity on fault mechanics and frictional stability is not well established, and experiments investigating heterogeneity have typically incorporated a single source of heterogeneity. Here, we conduct rock friction experiments on rough, bimaterial faults that are creeping, or steadily sliding, to explore the role of lithological heterogeneity on fault mechanics and stability. When strong asperities juxtapose weak gouge, stable sliding occurs with a low friction coefficient, µ. Encounters of strong diabase asperities on talc gouge lined faults initiate dramatic increases in µ and transitions to unstable sliding characterized by frequent stick-slip events (StSE). Seismic moments and stress drops of StSE decrease with increasing asperity abundance. Stress is concentrated at asperities during encounters, increasing with decreasing asperity abundance and leading to extensive mechanical damage. Interactions between strong, velocity weakening asperities provide a model to explain the nucleation of seismic and aseismic slip events on nominally stable, creeping faults.
more »
« less
Fault rock heterogeneity can produce fault weakness and reduce fault stability
Abstract Geological heterogeneity is abundant in crustal fault zones; however, its role in controlling the mechanical behaviour of faults is poorly constrained. Here, we present laboratory friction experiments on laterally heterogeneous faults, with patches of strong, rate-weakening quartz gouge and weak, rate-strengthening clay gouge. The experiments show that the heterogeneity leads to a significant reduction in strength and frictional stability in comparison to compositionally identical faults with homogeneously mixed gouges. We identify a combination of weakening effects, including smearing of the weak clay; differential compaction of the two gouges redistributing normal stress; and shear localization producing stress concentrations in the strong quartz patches. The results demonstrate that geological heterogeneity and its evolution can have pronounced effects on fault strength and stability and, by extension, on the occurrence of slow-slip transients versus earthquake ruptures and the characteristics of the resulting events, and should be further studied in lab experiments and earthquake source modelling.
more »
« less
- Award ID(s):
- 1822214
- PAR ID:
- 10463569
- Date Published:
- Journal Name:
- Nature Communications
- Volume:
- 13
- Issue:
- 1
- ISSN:
- 2041-1723
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Phyllosilicates weaken faults due to the formation of shear fabrics. Although the impacts of clay abundance and fabric on frictional strength, sliding stability, and porosity of faults are well studied, their influence on elastic properties is less known, though they are key factors for fault stiffness. We document the role that fabric and consolidation play in elastic properties and show that smectite content is the most important factor determining whether fabric or porosity controls the elastic response of faults. We conducted a suite of shear experiments on synthetic smectite‐quartz fault gouges (10–100 wt% smectite) and sediment incoming to the Sumatra subduction zone. We monitoredVp,Vs, friction, porosity, shear and bulk moduli. We find that mechanical and elastic properties for gouges with abundant smectite are almost entirely controlled by fabric formation (decreasing mechanical and elastic properties with shear). Though fabrics control the elastic response of smectite‐poor gouges over intermediate shear strains, porosity is the primary control throughout the majority of shearing. Elastic properties vary systematically with smectite content: High smectite gouges have values ofVp ~ 1,300–1,800 m/s,Vs ~ 900–1,100 m/s,K ~ 1–4 GPa, andG ~ 1–2 GPa, and low smectite gouges have values ofVp ~ 2,300–2,500 m/s,Vs ~ 1,200–1,300 m/s,K ~ 5–8 GPa, andG ~ 2.5–3 GPa. We find that, even in smectite‐poor gouges, shear fabric also affects stiffness and elastic moduli, implying that while smectite abundance plays a clear role in controlling gouge properties, other fine‐grained and platy clay minerals may produce similar behavior through their control on the development of fabrics and thin shear surfaces.more » « less
-
Abstract Establishing a constitutive law for fault friction is a crucial objective of earthquake science. However, the complex frictional behavior of natural and synthetic gouges in laboratory experiments eludes explanations. Here, we present a constitutive framework that elucidates the rate, state, and temperature dependence of fault friction under the relevant sliding velocities and temperatures of the brittle lithosphere during seismic cycles. The competition between healing mechanisms, such as viscoelastic collapse, pressure‐solution creep, and crack sealing, explains the low‐temperature stability transition from steady‐state velocity‐strengthening to velocity‐weakening as a function of slip‐rate and temperature. In addition, capturing the transition from cataclastic flow to semi‐brittle creep accounts for the stabilization of fault slip at elevated temperatures. We calibrate the model using extensive laboratory data on synthetic albite and granite gouge, and on natural samples from the Alpine Fault and the Mugi Mélange in the Shimanto accretionary complex in Japan. The constitutive model consistently explains the evolving frictional response of fault gouge from room temperature to 600°C for sliding velocities ranging from nanometers to millimeters per second. The frictional response of faults can be uniquely determined by the in situ lithology and the prevailing hydrothermal conditions.more » « less
-
Abstract During rock friction experiments at large displacement, room temperature and humidity, and following a hold test, the fracture energy increases approximately as the square of the logarithm of hold duration. While it's been long known that failure strength increases with log hold time, here the slip weakening distance,dh, also increases. The weakening distance increase is large, hundreds of percent change over a few thousand seconds. The initial bare surface and simulated fault gouge experiments were conducted in rotary shear at 25 MPa normal stress, 21 MPa confining stress and at displacements greater than 100 mm. In contrast, initially bare surface experiments at 5 MPa normal stress, unconfined at displacements less than 10 mm show effectively no change indh. We attribute the difference to the presence of an appreciable shear zone that develops due to wear over significant displacements, confined at elevated normal stress. Prior published studies of sheared simulated fault gouge at short displacement show both acknowledged and unacknowledged increases indhthat may relate to our observations. Since natural faults have well‐developed shear zones, the observations have more direct relevance to earthquake nucleation than prior laboratory studies that use short displacement data and focus on frictional strength recovery alone. However, the physics underlying this increase in weakening distance are not known; candidates are compaction (Nakatani, 1998) and delocalization (Sleep et al., 2000). Additional caveats are that these are room temperature and humidity experiments, at a single normal stress that have not yet been reproduced in other laboratories.more » « less
-
Earthquake swarms attributed to subsurface fluid injection are usually assumed to occur on faults destabilized by increased pore-fluid pressures. However, fluid injection could also activate aseismic slip, which might outpace pore-fluid migration and transmit earthquake-triggering stress changes beyond the fluid-pressurized region. We tested this theoretical prediction against data derived from fluid-injection experiments that activated and measured slow, aseismic slip on preexisting, shallow faults. We found that the pore pressure and slip history imply a fault whose strength is the product of a slip-weakening friction coefficient and the local effective normal stress. Using a coupled shear-rupture model, we derived constraints on the hydromechanical parameters of the actively deforming fault. The inferred aseismic rupture front propagates faster and to larger distances than the diffusion of pressurized pore fluid.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1038/s41467-022-27998-2
