skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Understanding Rapid PET Degradation via Reactive Molecular Dynamics Simulation and Kinetic Modeling
As the demand for PET plastic products continues to grow, developing effective processes to reduce their pollution is of critical importance. Pyrolysis, a promising technology to produce lighter and recyclable components from wasted plastic products, has therefore received considerable attention. In this work, the rapid pyrolysis of PET was studied by using reactive molecular dynamics (MD) simulations. Mechanisms for yielding gas species were unraveled, which involve the generation of ethylene and TPA radicals from ester oxygen−alkyl carbon bond dissociation and condensation reactions to consume TPA radicals with the products of long chains containing a phenyl benzoate structure and CO2. As atomistic simulations are typically conducted at the time scale of a few nanoseconds, a high temperature (i.e. >1000 K) is adopted for accelerated reaction events. To apply the results from MD simulations to practical pyrolysis processes, a kinetic model based on a set of ordinary differential equations was established, which is capable of describing the key products of PET pyrolysis as a function of time and temperature. It was further exploited to determine the optimal reaction conditions for low environmental impact. Overall, this study conducted a detailed mechanism study of PET pyrolysis and established an effective kinetic model for the main species. The approach presented herein to extract kinetic information such as detailed kinetic constants and activation energies from atomistic MD simulations can also be applied to related systems such as the pyrolysis of other polymers.  more » « less
Award ID(s):
2029397
PAR ID:
10466763
Author(s) / Creator(s):
; ; ; ; ;
Publisher / Repository:
American Chemical Society
Date Published:
Journal Name:
The Journal of Physical Chemistry A
Volume:
127
Issue:
35
ISSN:
1089-5639
Page Range / eLocation ID:
7323 to 7334
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; ; ; (, Matter)
    The growing global plastic waste challenge requires development of new plastic waste management strategies, such as pyrolysis, that will help to enable a circular plastic economy. Developing optimized, scalable pyrolysis reactors capable of maximizing the yield of desired products requires a fundamental understanding of plastic pyrolysis chemistry. Accordingly, the intrinsic reaction kinetics of polypropylene pyrolysis have been evaluated by the method of pulse-heated analysis of solid reactions (PHASR), which enables time-resolved measurement of pyrolysis kinetics at high temperature absent heat and mass transfer limitations on the millisecond scale. Polypropylene pyrolysis product evolution curves were generated at 525°C–625°C, and the overall reaction kinetics were described by a lumped first-order model with an activation energy of 242.0 ± 2.9 kJ mol−1 and a pre-exponential factor of 35.5 ± 0.6 ln(s−1). Additionally, the production of solid residues formed during polypropylene pyrolysis was investigated, revealing a secondary kinetic regime. 
    more » « less
  2. ; ; ; ; ; ; ; (, mSphere)
    Katherine McMahon, University of (Ed.)
    Plastics, such as polyethylene terephthalate (PET) from water bottles, are polluting our oceans, cities, and soils. While a number of Pseudomonas species have been described that degrade aliphatic polyesters, such as polyethylene (PE) and polyurethane (PUR), few from this genus that degrade the semiaromatic poly- mer PET have been reported. In this study, plastic-degrading bacteria were isolated from petroleum-polluted soils and screened for lipase activity that has been associ- ated with PET degradation. Strains and consortia of bacteria were grown in a liquid carbon-free basal medium (LCFBM) with PET as the sole carbon source. We moni- tored several key physical and chemical properties, including bacterial growth and modi!cation of the plastic surface, using scanning electron microscopy (SEM) and attenuated total re"ectance-Fourier transform infrared spectroscopy (ATR-FTIR) spec- troscopy. We detected by-products of hydrolysis of PET using 1H-nuclear magnetic resonance (1H NMR) analysis, consistent with the ATR-FTIR data. The full consortium of !ve strains containing Pseudomonas and Bacillus species grew synergistically in the presence of PET and the cleavage product bis(2-hydroxyethyl) terephthalic acid (BHET) as sole sources of carbon. Secreted enzymes extracted from the full consor- tium were capable of fully converting BHET to the metabolically usable monomers terephthalic acid (TPA) and ethylene glycol. Draft genomes provided evidence for mixed enzymatic capabilities between the strains for metabolic degradation of TPA and ethylene glycol, the building blocks of PET polymers, indicating cooperation and ability to cross-feed in a limited nutrient environment with PET as the sole carbon source. The use of bacterial consortia for the biodegradation of PET may provide a partial solution to widespread planetary plastic accumulation. 
    more » « less
  3. ; ; ; (, Bioengineering)
    Polyethylene terephthalate (PET) pollution has significant environmental consequences; thus, new degradation methods must be explored to mitigate this problem. We previously demonstrated that a consortium of three Pseudomonas and two Bacillus species can synergistically degrade PET in culture. The consortium more readily consumes bis(2-hydroxyethyl) terephthalate (BHET), a byproduct created in PET depolymerization, compared to PET, and can fully convert BHET into metabolically usable monomers, namely terephthalic acid (TPA) and ethylene glycol (EG). Because of its crystalline structure, the main limitation of the biodegradation of post-consumer PET is the initial transesterification from PET to BHET, depicting the need for a transesterification step in the degradation process. Additionally, there have been numerous studies done on the depolymerization reaction of PET to BHET, yet few have tested the biocompatibility of this product with a bacterial consortium. In this work, a two-step process is implemented for sustainable PET biodegradation, where PET is first depolymerized to form BHET using an orange peel ash (OPA)-catalyzed glycolysis reaction, followed by the complete degradation of the BHET glycolysis product by the bacterial consortium. Results show that OPA-catalyzed glycolysis reactions can fully depolymerize PET, with an average BHET yield of 92% (w/w), and that the reaction product is biocompatible with the bacterial consortium. After inoculation with the consortium, 19% degradation of the glycolysis product was observed in 2 weeks, for a total degradation percentage of 17% when taking both steps into account. Furthermore, the 10-week total BHET degradation rate was 35%, demonstrating that the glycolysis products are biocompatible with the consortium for longer periods of time, for a total two-step degradation rate of 33% over 10 weeks. While we predict that complete degradation is achievable using this method, further experimentation with the consortium can allow for a circular recycling process, where TPA can be recovered from culture media and reused to create new materials. 
    more » « less
  4. ; ; (, Faraday Discussions)
    2,4,dimethyloxetane is an important cyclic ether intermediate that is produced from hydroperoxyalkyl (QOOH) radicals in the low-temperature combustion of n -pentane. However, the reaction mechanisms and rates of consumption pathways remain unclear. In the present work, the pressure- and temperature-dependent kinetics of seven cyclic ether peroxy radicals, which stem from 2,4,dimethyloxetane via H-abstraction and O 2 addition, were determined. The automated kinetic workflow code, KinBot, was used to model the complexity of the chemistry in a stereochemically resolved manner and solve the resulting master equations from 300–1000 K and from 0.01–100 atm. The main conclusions from the calculations include (i) diastereomeric cyclic ether peroxy radicals show significantly different reactivities, (ii) the stereochemistry of the peroxy radical determines which QOOH isomerization steps are possible, (iii) conventional QOOH decomposition pathways, such as cyclic ether formation and HO 2 elimination, compete with ring-opening reactions, which primarily produce OH radicals, the outcome of which is sensitive to stereochemistry. Ring-opening reactions lead to unique products, such as unsaturated, acyclic peroxy radicals, that form direct connections with species present in other chemical kinetics mechanisms through "cross-over" reactions that may complicate the interpretation of experimental results from combustion of n-pentane and, by extension, other alkanes. For example, one cross-over reaction involving 1-hydroperoxy-4-pentanone-2-yl produces 2-(hydroperoxymethyl)-3-butanone-1-yl, which is an iso-pentane-derived ketohydroperoxide (KHP). At atmospheric pressure, the rate of chemical reactions of all seven peroxy radicals compete with that of collisional stabilization, resulting in well-skipping reactions. However, at 100 atm, only one out of seven peroxy radicals undergoes significant well-skipping reactions. The rates produced from the master equation calculations provide the first foundation for the development of detailed sub-mechanisms for cyclic ether intermediates. In addition, analysis of the complex reaction mechanisms of 2,4-dimethyloxetane-derived peroxy radicals provides insights into the effects of stereoisomers on reaction pathways and product yields. 
    more » « less
  5. ; ; (, ACS Sustainable Chemistry & Engineering)
    For chemical recycling of plastic wastes to be viable, chemical products generated in recycling need to find markets. A network model of the U.S. chemical manufacturing industry was used to assess at what cost points, and the extent to which, chemical products from thermal pyrolysis of polyethylene might find markets in the current U.S. chemical manufacturing industry. Network modeling determined the cost points at which the simulated industry network utilized the thermal pyrolysis products and which processes were displaced by the supply of recycled materials. The characteristic feature of the simulations is the large number of processes in the chemical manufacturing network that are impacted by the availability of a relatively small number of products from polyethylene recycling. In the case of polyethylene recycling, the capital cost requirements for expanding capacity to effectively utilize the recycled materials is greater than the capital required for the pyrolysis process. This suggests that identifying scenarios where recycled materials can be utilized in processes that have excess capacity will be a critical consideration in techno-economic analyses of recycling plastics. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email