Abstract Teaching experiments involving edible, biodegradable calcium alginate beads serve as an attractive model system to introduce upper secondary age students to core chemistry topics through innovations in sustainable consumer products. A teaching experiment is described that engages students with the synthesis of calcium alginate hydrogel beads from sodium alginate and calcium lactate, two food-safe and renewable materials. The beads’ outer membranes are a result of ionic interactions between carboxylate groups from alginate strands and the divalent calcium cations between them, thus forming cross-linked polymers. Protonation of the carboxylate groups on the alginate strands decreases crosslinking density affecting bead formation. First, various concentrations of citric acid are used to lower the pH of the sodium alginate solution and the effect on the calcium alginate bead formation is observed. A correlation between pH and bead shape and firmness is derived. This information is then used to explore juices with varying natural acidities. The experiment is amenable to implementation in the classroom or as an at-home activity. Learning outcomes include acid-base reactions, chemical bonding, polymer structures, and green chemistry concepts. Students consider the environmental challenges of traditional plastics used in packaging and how innovative new commercial products are attempting to provide solutions.
more »
« less
This content will become publicly available on October 10, 2024
Synthesis and Characterization of Biobased Lactose Hydrogels: A Teaching Experiment on Sustainable Polymers and Waste Biomass Valorization
Hydrogels are soft water-rich materials with physical properties that can be easily tuned by modifying their network structure. For instance, increasing or decreasing the cross-linking density has a profound effect on their water absorption capabilities and mechanical strength. These physical changes are showcased in a new experiment for organic chemistry and polymer science teaching laboratories based on the practical green synthesis and characterization of lactose methacrylate derived hydrogels. Lactose, a disaccharide derived from dairy waste byproducts, is functionalized with photoreactive methacrylate groups using methacrylic anhydride. The resulting mixture is subsequently photoirradiated to generate a cross-linked hydrogel. Structure–property relationships are assessed through comparative studies of three hydrogels of varying compositions. Compression tests and swelling studies in different aqueous environments offer a guided-inquiry experience. Students determine a relationship between cross-linking density and the physical properties of the hydrogels. This experiment highlights the valorization of biomass and multiple green chemistry principles including use of renewable feedstocks, atom economy, energy efficiency, waste prevention, and water as a benign solvent. Learning outcomes for an organic chemistry laboratory course include introduction to disaccharide and cross-linked polymer structures, observable physical change dependency with cross-linking density, and laboratory methods for evaluating water absorption capacities. Objectives aligned with a polymer course are incorporating mechanical compression instrumentation, mechanistic understanding of light-induced free radical polymerizations, and an appreciation for the application of hydrogels to commercial products. Overall, the translation of a current literature publication to an inexpensive and versatile experiment engages students in a modern example of sustainable polymer chemistry.
more »
« less
- Award ID(s):
- 1901635
- NSF-PAR ID:
- 10468504
- Publisher / Repository:
- ACS Publications
- Date Published:
- Journal Name:
- Journal of Chemical Education
- Volume:
- 100
- Issue:
- 10
- ISSN:
- 0021-9584
- Page Range / eLocation ID:
- 3981 to 3990
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Metal-mediated cross-coupling reactions offer organic chemists a wide array of stereo- and chemically-selective reactions with broad applications in fine chemical and pharmaceutical synthesis.1 Current batch-based synthesis methods are beginning to be replaced with flow chemistry strategies to take advantage of the improved consistency and process control methods offered by continuous flow systems.2,3 Most cross-coupling chemistries still encounter several issues in flow using homogeneous catalysis, including expensive catalyst recovery and air sensitivity due to the chemical nature of the catalyst ligands.1 To mitigate some of these issues, a ligand-free heterogeneous catalysis reaction was developed using palladium (Pd) loaded into a polymeric network of a silicone elastomer, poly(hydromethylsiloxane) (PHMS), that is not air sensitive and can be used with mild reaction solvents (ethanol and water).4 In this work we present a novel method of producing soft catalytic microparticles using a multiphase flow-focusing microreactor and demonstrate their application for continuous Suzuki-Miyaura cross-coupling reactions. The catalytic microparticles are produced in a coaxial glass capillary-based 3D flow-focusing microreactor. The microreactor consists of two precursors, a cross-linking catalyst in toluene and a mixture of the PHMS polymer and a divinyl cross-linker. The dispersed phase containing the polymer, cross-linker, and cross-linking catalyst is continuously mixed and then formed into microdroplets by the continuous phase of water and surfactant (sodium dodecyl sulfate) introduced in a counter-flow configuration. Elastomeric microdroplets with a diameter ranging between 50 to 300 micron are produced at 25 to 250 Hz with a size polydispersity less than 3% in single stream production. The physicochemical properties of the elastomeric microparticles such as particle swelling/softness can be tuned using the ratio of cross-linker to polymer as well as the ratio of polymer mixture to solvent during the particle formation. Swelling in toluene can be tuned up to 400% of the initial particle volume by reducing the concentration of cross-linker in the mixture and increasing the ratio of polymer to solvent during production.5 After the particles are produced and collected, they are transferred into toluene containing palladium acetate, allowing the particles to incorporate the palladium into the polymer network and then reduce the palladium to Pd0 with the Si-H functionality present on the PHMS backbones. After the reduction, the Pd-loaded particles can be washed and dried for storage or switched into an ethanol/water solution for loading into a micro-packed bed reactor (µ-PBR) for continuous organic synthesis. The in-situ reduction of Pd within the PHMS microparticles was confirmed using energy dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS) and focused ion beam-SEM, and TEM techniques. In the next step, we used the developed µ-PBR to conduct continuous organic synthesis of 4-phenyltoluene by Suzuki-Miyaura cross-coupling of 4-iodotoluene and phenylboronic acid using potassium carbonate as the base. Catalyst leaching was determined to only occur at sub ppm concentrations even at high solvent flow rates after 24 h of continuous run using inductively coupled plasma mass spectrometry (ICP-MS). The developed µ-PBR using the elastomeric microparticles is an important initial step towards the development of highly-efficient and green continuous manufacturing technologies in the pharma industry. In addition, the developed elastomeric microparticle synthesis technique can be utilized for the development of a library of other chemically cross-linkable polymer/cross-linker pairs for applications in organic synthesis, targeted drug delivery, cell encapsulation, or biomedical imaging. References 1. Ruiz-Castillo P, Buchwald SL. Applications of Palladium-Catalyzed C-N Cross-Coupling Reactions. Chem Rev. 2016;116(19):12564-12649. 2. Adamo A, Beingessner RL, Behnam M, et al. On-demand continuous-flow production of pharmaceuticals in a compact, reconfigurable system. Science. 2016;352(6281):61 LP-67. 3. Jensen KF. Flow Chemistry — Microreaction Technology Comes of Age. 2017;63(3). 4. Stibingerova I, Voltrova S, Kocova S, Lindale M, Srogl J. Modular Approach to Heterogenous Catalysis. Manipulation of Cross-Coupling Catalyst Activity. Org Lett. 2016;18(2):312-315. 5. Bennett JA, Kristof AJ, Vasudevan V, Genzer J, Srogl J, Abolhasani M. Microfluidic synthesis of elastomeric microparticles: A case study in catalysis of palladium-mediated cross-coupling. AIChE J. 2018;0(0):1-10.more » « less
-
more » « less
Abstract Wound debridement is crucial for proper wound care as it promotes fast and efficient wound healing through removal of necrotic tissue. The latter not only impairs new healthy tissue formation but also increases the odour and the wound exudate, allowing bacteria and other harmful foreign invaders to spread and infect the wound. Hydrogel wound dressings are usually applied for promoting autolytic wound debridement but this is slow and not a very efficient process. On the other hand, enzymatic products for wound debridement are either ointments or gels and they are easily washed out when used for treating highly exuding wounds. This study is an attempt to combine enzymatic debridement functionality with the high swelling ability of polyzwitterionic networks and to produce an innovative dressing with debridement functionality for the healing of highly exuding wounds. For this purpose, two polyzwitterionic hydrogels were synthesized, poly(sulfobetaine methacrylate) and poly(carboxybetaine methacrylate) hydrogels, which were loaded with the protease subtilisin DY for imparting debridement functionality. The swelling ability and mechanical properties of zwitterionic polymer (ZP) hydrogels were shown to depend on their different propensities to physical network formation. Poly(carboxybetaine methacrylate) hydrogels demonstrated better capacity for wound exudate absorption as well as for exerting higher enzymatic debridement activity. Both ZP hydrogels were shown to be non‐cytotoxic which confirms their appropriateness for direct contact with injured tissues. Thus, the newly developed ZP hydrogels demonstrate the potential to be used as new dressing materials with enzymatic debridement functionality for highly exuding wounds. © 2019 The Authors.
Polymer International published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry. -
more » « less
Abstract Hydrogels and polydimethylsiloxane (PDMS) are complementary to each other, since the hydrophobic PDMS provides a more stable and rigid substrate, while the water‐rich hydrogel possesses remarkable hydrophilicity, biocompatibility, and similarity to biological tissues. Herein a transparent and stretchable covalently bonded PDMS‐hydrogel bilayer (PHB) structure is prepared via in situ free radical copolymerization of acrylamide and allylamine‐exfoliated‐ZrP (AA‐e‐ZrP) on a functionalized PDMS surface. The AA‐e‐ZrP serves as cross‐linking nano‐patches in the polymer gel network. The covalently bonded structure is constructed through the addition reaction of vinyl groups of PDMS surface and monomers, obtaining a strong interfacial adhesion between the PDMS and the hydrogel. A mechanical‐responsive wrinkle surface, which exhibs transparency change mechanochromism, is created via introducing a cross‐linked polyvinyl alcohol film atop the PHB structure. A finite element model is implemented to simulate the wrinkle formation process. The implication of the present finding for the interfacial design of the PHB and PDMS‐hydrogel‐PVA trilayer (PHPT) structures is discussed.
-
Coupling of organic and inorganic chemistry presents a new degree of freedom in nano-engineering of thermo-mechanical properties of cement-based materials. Despite these vast technological benefits, molecular scale cross-linking of calcium-silicate-hydrate (C-S-H) gel with organic molecules still presents a significant challenge. Herein, we report experimental results on sol-gel synthesis, structure and morphology of nanocrystalline C-S-H cross-linked with dipodal organosilanes. These novel organic-inorganic gels have layered turbostratic molecular structure with similarities to C-S-H precipitating in hydrating cement paste. The organic molecules' chain length controls the interlayer spacing, which shows little to no shrinkage upon dehydration up to 105 °C. However, the structure gets distorted in the basal crystallite plane, in which dimer and trimer Si-polyhedra structures condense on a 2D hexagonal Ca-polyhedra layer. Cross-linked C-S-H gels display plate-like morphology with tendency toward stacking into agglomerates at the larger scale. If successfully realized in cement environment, e.g. high concentration seed, such novel organic-inorganic C-S-H gels could potentially provide cement-based matrices with unique properties unmatched by classical inorganic systems.more » « less
