skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • New insights into the electrochemical performance of precursor derived Si(Nb)OC composites as anode materials for batteries
Title: New insights into the electrochemical performance of precursor derived Si(Nb)OC composites as anode materials for batteries
Successfully synthesized Si(Nb)OC composites through single source precursor route and as-pyrolyzed Si(Nb)OC demonstrate good rate capability due to uniformly distributed nanosized Nb2O5and graphitic carbon structure in the amorphous SiOC matrix.  more » « less
Award ID(s):
1743701
PAR ID:
10469300
Author(s) / Creator(s):
; ;
Publisher / Repository:
RSC advances
Date Published:
Journal Name:
RSC Advances
Volume:
13
Issue:
40
ISSN:
2046-2069
Page Range / eLocation ID:
27887 to 27897
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; (, Angewandte Chemie International Edition)
    Abstract Al(OC(CF3)3)(PhF) reacts with silanols present on partially dehydroxylated silica to form well‐defined ≡SiOAl(OC(CF3)3)2(O(Si≡)2) (1).27Al NMR and DFT calculations with a small cluster model to approximate the silica surface show that the aluminum in1adopts a distorted trigonal bipyramidal coordination geometry by coordinating to a nearby siloxane bridge and a fluorine from the alkoxide. Fluoride ion affinity (FIA) calculations follow experimental trends and show that1is a stronger Lewis acid than B(C6F5)3and Al(OC(CF3)3)(PhF) but is weaker than Al(OC(CF3)3) andiPr3Si+. Cp2Zr(CH3)2reacts with1to form [Cp2ZrCH3][≡SiOAl(OC(CF3)3)2(CH3)] (3) by methide abstraction. This reactivity pattern is similar to reactions of organometallics with the proposed strong Lewis acid sites present on Al2O3. 
    more » « less
  2. ; ; ; (, International Journal of Applied Ceramic Technology)
    Abstract This work systematically investigates the thermodynamic stability of SiaOb(M)cCdstructures derived from polymeric precursors incorporating metal fillers: Ta, Nb, and Hf, at 1200 and 1500°C. Structural characterization of the polymer derived ceramics (PDCs) employs X‐ray diffraction, Fourier transform infrared spectroscopy, and X‐ray photoelectron spectroscopy. Enthalpies of formation relative to crystalline components (metal oxide, silica, silicon carbide, and graphite) are obtained from thermodynamic measurements by high temperature oxide melt solution calorimetry. The enthalpies of formation (∆H°f, comp) of Ta‐1200, Hf‐1200, Nb‐1200, Ta‐1500, Hf‐1500, and Nb‐1500 specimens are −137.82 ± 9.72, −256.31 ± 8.97, −82.80 ± 9.82, −182.80 ± 7.85, −292.54 ± 9.38, −224.98 ± 9.60 kJ/mol, respectively. Overall incorporation of Hf results in most thermodynamically stable structures at all synthesis temperatures. SiaOb(M)cCdspecimens employing Nb fillers undergo the most stable structural evolution in this temperature range. The results indicate strong thermodynamic drive for carbothermal reduction of metal oxide domains. Incorporation of Ta provides the greatest stabilization of SiO3C mixed bonding environments. Ultimately, the choice of metal filler influences composition, structural evolution, and thermodynamic stability in PDCs. 
    more » « less
  3. ; ; ; ; ; ; ; ; ; ; et al (, Research)
    Wafer-scale synthesis of p-type TMD films is critical for its commercialization in next-generation electro/optoelectronics. In this work, wafer-scale intrinsic n-type WS2films and in situ Nb-doped p-type WS2films were synthesized through atomic layer deposition (ALD) on 8-inchα-Al2O3/Si wafers, 2-inch sapphire, and 1 cm2GaN substrate pieces. The Nb doping concentration was precisely controlled by altering cycle number of Nb precursor and activated by postannealing. WS2n-FETs and Nb-doped p-FETs with different Nb concentrations have been fabricated using CMOS-compatible processes. X-ray photoelectron spectroscopy, Raman spectroscopy, and Hall measurements confirmed the effective substitutional doping with Nb. The on/off ratio and electron mobility of WS2n-FET are as high as 105and 6.85 cm2 V-1 s-1, respectively. In WS2p-FET with 15-cycle Nb doping, the on/off ratio and hole mobility are 10 and 0.016 cm2 V-1 s-1, respectively. The p-n structure based on n- and p- type WS2films was proved with a 104rectifying ratio. The realization of controllablein situNb-doped WS2films paved a way for fabricating wafer-scale complementary WS2FETs. 
    more » « less
  4. ; ; ; (, The Analyst)
    The photovoltage (Voc) of n-Si/Au photoelectrodes varies with the solution potential (E0) whenE0falls between the valence and conduction band edges of the semiconductor but is constant whenE0is more positive than the valence band edge. 
    more » « less
  5. ; (, Advanced Energy and Sustainability Research)
    We report an application of a pulsed ultraviolet (UV) laser (λ = 355 nm) in producing translucent Si solar cells. This process efficiently generates a densely packed microhole array on a fully fabricated Si P‐N junction solar cell in just a few minutes. Herein, prototype cells with a nominal microhole diameter of 23 μm with a spacing between 60 and 300 μm are fabricated. High‐resolution electron‐beam microscopy reveals that the UV laser beam introduces amorphized silicon oxide (SiOx) in proximity to the patterned microholes via localized heating in air. Quantitative photovoltaic (PV) analysis shows a decline in the open‐circuit voltage (Voc) and the fill factor (FF) of the cells with the increase in the microhole density, likely due to the P‐N junction damage during the laser beam irradiation. Despite the reduction inVocand FF, the solar cells retain a short‐circuit current density (Jsc) above 90% without post‐processing. The inherent microhole geometry associated with the laser beam profile allows multiple light scattering within the confined microhole structure, enhancing the translucency of the cells. While further development is required for optimization, these findings support the potential use of UV laser beams for fast and scalable production of translucent solar cells. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email