An official website of the United States government
Full-system simulation of computer systems is critical for capturing the complex interplay between various hard-ware and software components in future systems. Modeling the network subsystem is indispensable for the fidelity of full-system simulations due to the increasing importance of scale-out systems. Over the last decade, the network software stack has undergone major changes, with userspace networking stacks and data-plane networks rapidly replacing the conventional kernel network stack. Nevertheless, the current state-of-the-art architectural simulator, gem5, still employs kernel networking, which precludes realistic network application scenarios. In this work, we first demonstrate the limitations of gem5's current network stack in achieving high network bandwidth. Then, we enable a userspace networking stack on gem5. We extend gem5's NIC hardware model and device driver to sup-port userspace device drivers running the DPDK framework. Additionally, we implement a network load generator hardware model in gem5 to generate various traffic patterns and per-form per-packet timestamp and latency measurements without introducing packet loss. We develop a suite of six network-intensive benchmarks for stress testing the host network stack. These applications, based on DPDK, can run on both gem5 and real systems. Our experimental results show that enabling userspace networking improves gem5's network bandwidth by 6.3× compared with the current Linux kernel software stack. We characterize the performance of DPDK benchmarks running on both a real system and gem5, and evaluate the sensitivity of the applications to various system and microarchitecture parameters. This work marks the first step in refactoring the networking subsystem in gem5.
more »
« less
Profiling gem5 Simulator
In this work, we set out to find the answers to the following questions: (1) Where are the bottlenecks in a state-of-theart architectural simulator? (2) How much faster can architectural simulations run by tuning system configurations? (3) What are the opportunities in accelerating software simulation using hardware accelerators? We choose gem5 as the representative architectural simulator, run several simulations with various configurations, perform a detailed architectural analysis of the gem5 source code on different server platforms, tune both system and architectural settings for running simulations, and discuss the future opportunities in accelerating gem5 as an important application. Our detailed profiling of gem5 reveals that its performance is extremely sensitive to the size of the Ll cache. Our experimental results show that a RISC-V core with 32KB data and instruction cache improves gem5’s simulation speed by 31%-61% compared with a baseline core with 8KB Ll caches. Our paper is the first step toward building specialized hardware and software environments for accelerating software-based simulators.
more »
« less
- Award ID(s):
- 2213807
- PAR ID:
- 10469514
- Publisher / Repository:
- IEEE
- Date Published:
- ISSN:
- 979-8-3503-9739-0
- ISBN:
- 979-8-3503-9739-0
- Page Range / eLocation ID:
- 103 to 113
- Format(s):
- Medium: X
- Location:
- Raleigh, NC, USA
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
null (Ed.)Running experiments in modern computer architecture simulators can be a difficult and error-prone endeavor. Users must track many configurations, components and outputs between simulation runs. The gem5 simulator is no exception to this, requiring researchers to gather, organize, and create a significant number of components for a single simulation. In this paper, we present the GEM5ART framework, a tool to aid gem5 users in better structuring and running architecture simulations, and GEM5 RESOURCES, a suite of resources with known compatibility with the simulator. These new additions to the gem5 project make full system simulation easier, allowing researchers to concentrate more so on their architectural innovations over setting up the simulation framework. The GEM5ART framework carefully logs the resources used in a gem5 simulation and places the results obtained within a database, thus enabling simple reproduction of experiments. The pre-built resources allow researchers to jump straight into running simulations rather than having to spend valuable time creating them. GEM5ART has been released with a permissive, open source license allowing the broader computer architecture community to contribute as workloads and workflows evolve. An archive of the data, an related materials, presented in this paper can be found at https://doi.org/10.6084/m9.figshare.14176802more » « less
-
Cycle-level architectural simulation of Trusted Execution Environments (TEEs) can enable extensive design space exploration of these secure architectures. Existing architectural simulators which support TEEs are either based on hardware-level implementations or abstract analytic models. In this paper, we describe the implementation of the gem5 models necessary to run and evaluate the RISCV-based open source TEE, Keystone, and we discuss how this simulation environment opens new avenues for designing and studying these trusted environments. We show that the Keystone simulations on gem5 exhibit similar performance as the previous hardware evaluations of Keystone. We also describe three simple example use cases (understanding the reason of trusted execution slowdown, performance of memory encryption, and micro-architecture impact on trusted execution performance) to demonstrate how the ability to simulate TEEs can provide useful information about their behavior in the existing form and also with enhanced designs.more » « less
-
The open-source and community-supported gem5 simulator is one of the most popular tools for computer architecture research. This simulation infrastructure allows researchers to model modern computer hardware at the cycle level, and it has enough fidelity to boot unmodified Linux-based operating systems and run full applications for multiple architectures including x86, Arm, and RISC-V. The gem5 simulator has been under active development over the last nine years since the original gem5 release. In this time, there have been over 7500 commits to the codebase from over 250 unique contributors which have improved the simulator by adding new features, fixing bugs, and increasing the code quality. In this paper, we give and overview of gem5's usage and features, describe the current state of the gem5 simulator, and enumerate the major changes since the initial release of gem5. We also discuss how the gem5 simulator has transitioned to a formal governance model to enable continued improvement and community support for the next 20 years of computer architecture research.more » « less
-
The open-source and community-supported gem5 simulator is one of the most popular tools for computer architecture research. This simulation infrastructure allows researchers to model modern computer hardware at the cycle level, and it has enough fidelity to boot unmodified Linux-based operating systems and run full applications for multiple architectures including x86, Arm, and RISC-V. The gem5 simulator has been under active development over the last nine years since the original gem5 release. In this time, there have been over 7500 commits to the codebase from over 250 unique contributors which have improved the simulator by adding new features, fixing bugs, and increasing the code quality. In this paper, we give and overview of gem5's usage and features, describe the current state of the gem5 simulator, and enumerate the major changes since the initial release of gem5. We also discuss how the gem5 simulator has transitioned to a formal governance model to enable continued improvement and community support for the next 20 years of computer architecture research.more » « less
