To assess the variability of redox states among mare basalt source regions, investigation of the valence of Ti, Cr, and V and the coordination environment of Ti in pyroxene and olivine in lunar rocks via
In 1972, Apollo 17 astronauts returned 170.4 kg of lunar material. Within 1 month of their return, a subset of those samples was specially curated with the forethought that future analytical techniques would offer new insight into the formation and evolution of the Moon. Of interest in this work is sample 71036, a basalt collected from the rim of Steno crater in the Taurus–Littrow Valley, which was stored frozen and was processed and released for study 50 years later. We report, for the first time, the detailed mineralogy and petrology of 71036 and its companion samples 71035, 71037, and 71055 using a novel combination of 2‐D and 3‐D methods. We investigate lunar volatiles through in situ measurements of apatite and 3‐D measurements of vesicles to understand the degassing histories of the Steno crater basalts. Our coupled 2‐D petrography and 3‐D tomography data sets support a model of the Steno crater basalts crystallizing in the upper crust of a mare lava flow. Apatite F and OH chemistry and the late‐stage deformation of voids and formation of smaller vesicles provide evidence supporting coeval degassing of volatiles and crystallization of mesostasis apatite in Apollo 17 basalts. This work helps to close knowledge gaps surrounding the origin, magmatic evolution, emplacement, and crystallization history of high‐titanium basalts.
more » « less- NSF-PAR ID:
- 10470154
- Publisher / Repository:
- Wiley-Blackwell
- Date Published:
- Journal Name:
- Meteoritics & Planetary Science
- Volume:
- 58
- Issue:
- 11
- ISSN:
- 1086-9379
- Format(s):
- Medium: X Size: p. 1600-1628
- Size(s):
- ["p. 1600-1628"]
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract XANES (X‐ray absorption near‐edge structure) spectroscopy has been extended to Apollo 17 basalts: two high‐Ti (70017 and 74275) hand samples, and three very low‐Ti (70006,371, 70007,289B, and 70007,296) basalt fragments from the Apollo 17 deep drill core. Valences of Ti in pyroxene of both suites range from 3.6 to 4, or from 40% to 0% Ti3+, averaging 15–20% Ti3+. Assuming Ti3+is more compatible in pyroxene than Ti4+, then even lower Ti3+proportions are indicated for the parental melts. TheVLT pyroxene exhibits a slightly wider range of V valences (2.57–2.96) than the high‐Ti pyroxene (2.65–2.86) and a much wider range of Cr valences (2.32–2.80 versus 2.68–2.86); Cr is generally reduced inVLT pyroxene compared to high‐Ti pyroxene. Valences of Ti and Cr inVLT pyroxene become less reduced with increasing FeO contents, possibly indicating change in oxygen fugacity during crystallization. Olivine in all samples has very low (<20%) proportions of Ti3+, with no Ti3+and higher proportions of Ti in tetrahedral coordination in theVLT s than in the high‐Ti basalts. Olivine in 74275, including that in a dunite clast, has much higher proportions of Cr2+than the pyroxene in that sample, consistent with previous studies indicating that the olivine grains in this sample are xenocrysts and possibly indicating oxidation just prior to pyroxene crystallization. Results for this sample, theVLT s, and previously studied Apollo 14 and 15 basalts all indicate that mare magmas were in reducing environments at depth, as recorded in early crystallization products, and that later, presumably shallower environments, were relatively oxidizing; single, characteristicf O -
more » « less
Abstract The origin, evolution, and cycling of volatiles on the Moon are established by processes such as the giant moon forming impact, degassing of the lunar magma ocean, degassing during surface eruptions, and lunar surface gardening events. These processes typically induce mass‐dependent stable isotope fractionations. Mass‐independent fractionation of stable isotopes has yet to be demonstrated during events that release large volumes of gas on the moon and establish transient lunar atmospheres. We present quadruple sulfur isotope compositions of orange and black glass beads from drive tube 74002/1. The sulfur isotope and concentration data collected on the orange and black glasses confirm a role for magmatic sulfur loss during eruption. The Δ33S value of the orange glasses is homogenous (Δ33S = −0.029‰ ± 0.004‰, 2SE) and different from the isotopic composition of lunar basalts (Δ33S = 0.002‰ ± 0.004‰, 2SE). We link the negative Δ33S composition of the orange glasses to an anomalous sulfur source in the lunar mantle. The nature of this anomalous sulfur source remains unknown and is either linked to (a) an impactor that delivered anomalous sulfur after late accretion, (b) sulfur that was photochemically processed early during lunar evolution and was transported to the lunar mantle, or (c) a primitive sulfur component that survived mantle mixing. The examined black glass preserves a mass‐dependent Δ33S composition (−0.008‰ ± 0.006‰, 2SE). The orange and black glasses are considered genetically related, but the discrepancy in Δ33S composition among the two samples calls their relationship into question.
-
more » « less
Abstract Mafic volcanic activity is dominated by effusive to mildly explosive eruptions. Plinian and ignimbrite-forming mafic eruptions, while rare, are also possible; however, the conditions that promote such explosivity are still being explored. Eruption style is determined by the ability of gas to escape as magma ascends, which tends to be easier in low-viscosity, mafic magmas. If magma permeability is sufficiently high to reduce bubble overpressure during ascent, volatiles may escape from the magma, inhibiting violent explosive activity. In contrast, if the permeability is sufficiently low to retain the gas phase within the magma during ascent, bubble overpressure may drive magma fragmentation. Rapid ascent may induce disequilibrium crystallization, increasing viscosity and affecting the bubble network with consequences for permeability, and hence, explosivity. To explore the conditions that promote strongly explosive mafic volcanism, we combine microlite textural analyses with synchrotron x-ray computed microtomography of 10 pyroclasts from the 12.6 ka mafic Curacautín Ignimbrite (Llaima Volcano, Chile). We quantify microlite crystal size distributions (CSD), microlite number densities, porosity, bubble interconnectivity, bubble number density, and geometrical properties of the porous media to investigate the role of magma degassing processes at mafic explosive eruptions. We use an analytical technique to estimate permeability and tortuosity by combing the Kozeny-Carman relationship, tortuosity factor, and pyroclast vesicle textures. The groundmass of our samples is composed of up to 44% plagioclase microlites, > 85% of which are < 10 µm in length. In addition, we identify two populations of vesicles in our samples: (1) a convoluted interconnected vesicle network produced by extensive coalescence of smaller vesicles (> 99% of pore volume), and (2) a population of very small and completely isolated vesicles (< 1% of porosity). Computed permeability ranges from 3.0 × 10−13to 6.3 × 10−12m2, which are lower than the similarly explosive mafic eruptions of Tarawera (1886; New Zealand) and Etna (112 BC; Italy). The combination of our CSDs, microlite number densities, and 3D vesicle textures evidence rapid ascent that induced high disequilibrium conditions, promoting rapid syn-eruptive crystallization of microlites within the shallow conduit. We interpret that microlite crystallization increased viscosity while simultaneously forcing bubbles to deform as they grew together, resulting in the permeable by highly tortuous network of vesicles. Using the bubble number densities for the isolated vesicles (0.1-3−3 × 104 bubbles per mm3), we obtain a minimum average decompression rate of 1.4 MPa/s. Despite the textural evidence that the Curacautín magma reached the percolation threshold, we propose that rapid ascent suppressed outgassing and increased bubble overpressures, leading to explosive fragmentation. Further, using the porosity and permeability of our samples, we estimated that a bubble overpressure > 5 MPa could have been sufficient to fragment the Curacautín magma. Other mafic explosive eruptions report similar disequilibrium conditions induced by rapid ascent rate, implying that syn-eruptive disequilibrium conditions may control the explosivity of mafic eruptions more generally.
-
Abstract The Bishop Tuff (BT), erupted from the Long Valley caldera in California, displays two types of geochemical gradients with temperature: one is related to magma mixing, whereas the other is found in the high-SiO2 rhyolite portion of the Bishop Tuff and is characterized by twofold or lower concentration variations in minor and trace elements that are strongly correlated with temperature. It is proposed that the latter zonation, which preceded phenocryst growth, developed as a result of mineral–melt partitioning between interstitial melt and surrounding crystals in a parental mush, from which variable melt fractions were segregated. To test this hypothesis, trends of increasing vs decreasing element concentrations with temperature (as a proxy for melt fraction), obtained from published data on single-clast pumice samples from the high-SiO2 rhyolite portion of the Bishop Tuff, were used to infer their relative degrees of incompatibility vs compatibility between crystals and melt in the parental mush. Relative compatibility values (RCVi) for all elements i, defined as the concentration slope with temperature divided by average concentration, are shown to be linearly correlated with their respective bulk partition coefficients (bulk Di). Mineral–melt partition coefficients from the literature were used to constrain the average stoichiometry of the crystallization/melting reaction in the parental mush: 32 % quartz + 34 % plagioclase + 31 % K-feldspar + 1·60 % biotite + 0·42 % titanomagnetite + 0·34 % ilmenite + 0·093 % allanite + 0·024 % zircon + 0·025 % apatite = 100 % liquid. The proportions of tectosilicates in the reaction (i.e. location of eutectic) are consistent with depths of melt segregation of ~400–550 MPa and an activity of H2O of ~0·4–0·6. Temperatures of <770–780 °C are constrained by allanite in the reaction. Evidence that a fluid phase was present in the parental mush is seen in the decreasing versus increasing H2O and CO2 contents with temperature in the segregated interstitial melt that formed the high-SiO2 rhyolite portion of the Bishop Tuff. The presence of an excess fluid phase, which strongly partitions CO2 relative to the melt, is required to explain the compatible behavior of CO2, whereas the fluid abundance must have been low to explain the incompatible behavior of H2O. Calculated degassing paths for interstitial melts, which segregated from the parental mush and ascended to shallower depths to grow phenocrysts, match published volatile analyses in quartz-hosted melt inclusions and constrain fluid abundances in the mush to be ≤1 wt%. The source of volatiles in the parental mush, irrespective of whether it formed by crystallization or partial melting, must have been primarily from associated basalts, as granitoid crust is too volatile poor. Approximately twice as much basalt as rhyolite is needed to provide the requisite volatiles. The determination of bulk Di for several elements gives the bulk composition of the parental leucogranitic mush and shows that it is distinct from Mesozoic Sierran arc granitoids, as expected. Collectively, the results from this study provide new constraints for models of the complex, multi-stage processes throughout the Plio-Quaternary, involving both mantle-derived basalt and pre-existing crust, that led to the origin of the parental body to the Bishop Tuff.more » « less
-
more » « less
Abstract Lunar impact glasses, formed during impact events when the regolith is quenched during the ejecta's ballistic flight, are small samples whose information can lead to important advances in studies of the Moon. For example, they provide evidence that constrains both the compositional evolution of the lunar crust and the timing of the lunar impact flux starting at ~4,000 million years ago. They are abundant in the lunar regolith and retain geochemical information that tells us where and when they formed. Thus, they provide important details about areas of the Moon both sampled and not sampled by Apollo or Luna missions or lunar meteorites. Additionally, as a result of these glasses possessing a chemical memory of formation location and age, studies of lunar impact glasses provide a foundation on which to conduct studies of impact glasses from other planetary bodies. A summary of past and current lunar impact glass investigations, using glasses from the Apollo 11, 12, 14, 15, 16, and 17 regoliths, along with plans for future work, will be presented.
