An official website of the United States government
The use of conventional in vitro and preclinical animal models often fail to properly recapitulate the complex nature of human diseases and hamper the success of translational therapies in humans [1-3] Consequently, research has moved towards organ-on-chip technology to better mimic human tissue interfaces and organ functionality. Herein, we describe a novel approach for the fabrication of a biocompatible membrane made of porous silicon (PSi) for use in organ-on-chip technology that provides key advantages when modeling complex tissue interfaces seen in vivo. By combining well-established methods in the semiconductor industry with organ-on-chip technology, we have developed a novel way of producing thin (25 μm) freestanding PSi biocompatible membranes with both nano (~15.5 nm diameter pores) and macroporous (~0.5 μm diameter pores) structures. To validate the proposed novel membrane, we chose to recapitulate the dynamic environment of the alveolar blood gas exchange interface in alveolar co-culture. Viability assays and immunofluorescence imaging indicate that human pulmonary cells remain viable on the PSi membrane during long-term culture (14 days). Interestingly, it was observed that macrophages can significantly remodel and degrade the PSi membrane substrate in culture. This degradation will allow for more intimate physiological cellular contact between cells, mimicking a true blood-gas exchange interface as observed in vivo. Broadly, we believe that this novel PSi membrane may be used in more complex organ-on-chip and lab-on-chip model systems to accurately recapitulate human anatomy and physiology to provide further insight into human disease pathology and pre-clinical response to therapeutics.
more »
« less
Morphological and mechanical characterization of a novel porous silicon membrane used in a lung-on-a-chip system
Abstract In the last decade, organ-on-a-chip technology has been researched as an alternative to animal and cell culture models (Buhidma et al. in NPJ Parkinson’s Dis, 2020; Pearce et al. in Eur Cells Mater 13:1–10, 2007; Huh et al. in Nat Protoc 8:2135–2157, 2013). While extensive research has focused on the biological functions of these chips, there has been limited exploration of functional materials that can accurately replicate the biological environment. Our group concentrated on a lung-on-a-chip featuring a newly fabricated porous silicon bio-membrane. This bio-membrane mimics the interstitial space found between epithelial and endothelial cells in vivo, with a thickness of approximately 1 μm (Ingber in Cell 164:1105–1109, 2016). This study aims to establish a fabrication method for producing a thin, uniform porous silicon membrane with a predictablereduced modulus. We conducted mechanical and morphological characterization using scanning electron microscopy and nanoindentation. A small, parametric study was conducted to determine the reduced modulus of the porous silicon and how it may relate to the morphological features of the membrane. We compare our results to other works. Graphical Abstract
more »
« less
- Award ID(s):
- 1827847
- PAR ID:
- 10470393
- Publisher / Repository:
- Cambridge University Press (CUP)
- Date Published:
- Journal Name:
- MRS Advances
- Volume:
- 8
- Issue:
- 17
- ISSN:
- 2059-8521
- Format(s):
- Medium: X Size: p. 996-1003
- Size(s):
- p. 996-1003
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Thinning silicon wafers via wet etching is a common practice in the microelectromechanical system (MEMS) industry to produce membranes and other structures Wang (Nano Lett 13(9): 4393–4398, 2013). Controlling the thickness of a membrane is a critical aspect to optimize the functionality of these devices. Our research specifically focuses on the production of bio-membranes for lung-on-a-chip (LoaC) applications. In our fabrication, it is crucial for us to determine the membranes’ thickness in a non-invasive way. This study aims to address this issue by attempting to develop a tool that uses the optical properties of light transmission through silicon to find a correlation with thickness. To find this correlation, we conducted a small experimental study where we fabricated ultra-thin membranes and captured images of the light transmission through these samples. This paper will report the correlation found between calculated average intensities of these images and measurements done using scanning electron microscopy (SEM). Graphical abstractmore » « less
-
SPIND(sparse-pattern indexing) is an auto-indexing algorithm for sparse snapshot diffraction patterns (`stills') that requires the positions of only five Bragg peaks in a single pattern, when provided with unit-cell parameters. The capability ofSPINDis demonstrated for the orientation determination of sparse diffraction patterns using simulated data from microcrystals of a small inorganic molecule containing three iodines, 5-amino-2,4,6-triiodoisophthalic acid monohydrate (I3C) [Beck & Sheldrick (2008),Acta Cryst.E64, o1286], which is challenging for commonly used indexing algorithms.SPIND, integrated withCrystFEL[Whiteet al.(2012),J. Appl. Cryst.45, 335–341], is then shown to improve the indexing rate and quality of merged serial femtosecond crystallography data from two membrane proteins, the human δ-opioid receptor in complex with a bi-functional peptide ligand DIPP-NH2and the NTQ chloride-pumping rhodopsin (CIR). The study demonstrates the suitability ofSPINDfor indexing sparse inorganic crystal data with smaller unit cells, and for improving the quality of serial femtosecond protein crystallography data, significantly reducing the amount of sample and beam time required by making better use of limited data sets.SPINDis written in Python and is publicly available under the GNU General Public License from https://github.com/LiuLab-CSRC/SPIND.more » « less
-
By mimicking biomimetic synaptic processes, the success of artificial intelligence (AI) has been astounding with various applications such as driving automation, big data analysis, and natural-language processing.[1-4] Due to a large quantity of data transmission between the separated memory unit and the logic unit, the classical computing system with von Neumann architecture consumes excessive energy and has a significant processing delay.[5] Furthermore, the speed difference between the two units also causes extra delay, which is referred to as the memory wall.[6, 7] To keep pace with the rapid growth of AI applications, enhanced hardware systems that particularly feature an energy-efficient and high-speed hardware system need to be secured. The novel neuromorphic computing system, an in-memory architecture with low power consumption, has been suggested as an alternative to the conventional system. Memristors with analog-type resistive switching behavior are a promising candidate for implementing the neuromorphic computing system since the devices can modulate the conductance with cycles that act as synaptic weights to process input signals and store information.[8, 9] The memristor has sparked tremendous interest due to its simple two-terminal structure, including top electrode (TE), bottom electrode (BE), and an intermediate resistive switching (RS) layer. Many oxide materials, including HfO2, Ta2O5, and IGZO, have extensively been studied as an RS layer of memristors. Silicon dioxide (SiO2) features 3D structural conformity with the conventional CMOS technology and high wafer-scale homogeneity, which has benefited modern microelectronic devices as dielectric and/or passivation layers. Therefore, the use of SiO2as a memristor RS layer for neuromorphic computing is expected to be compatible with current Si technology with minimal processing and material-related complexities. In this work, we proposed SiO2-based memristor and investigated switching behaviors metallized with different reduction potentials by applying pure Cu and Ag, and their alloys with varied ratios. Heavily doped p-type silicon was chosen as BE in order to exclude any effects of the BE ions on the memristor performance. We previously reported that the selection of TE is crucial for achieving a high memory window and stable switching performance. According to the study which compares the roles of Cu (switching stabilizer) and Ag (large switching window performer) TEs for oxide memristors, we have selected the TE materials and their alloys to engineer the SiO2-based memristor characteristics. The Ag TE leads to a larger memory window of the SiO2memristor, but the device shows relatively large variation and less reliability. On the other hand, the Cu TE device presents uniform gradual switching behavior which is in line with our previous report that Cu can be served as a stabilizer, but with small on/off ratio.[9] These distinct performances with Cu and Ag metallization leads us to utilize a Cu/Ag alloy as the TE. Various compositions of Cu/Ag were examined for the optimization of the memristor TEs. With a Cu/Ag alloying TE with optimized ratio, our SiO2based memristor demonstrates uniform switching behavior and memory window for analog switching applications. Also, it shows ideal potentiation and depression synaptic behavior under the positive/negative spikes (pulse train). In conclusion, the SiO2memristors with different metallization were established. To tune the property of RS layer, the sputtering conditions of RS were varied. To investigate the influence of TE selections on switching performance of memristor, we integrated Cu, Ag and Cu/Ag alloy as TEs and compared the switch characteristics. Our encouraging results clearly demonstrate that SiO2with Cu/Ag is a promising memristor device with synaptic switching behavior in neuromorphic computing applications. Acknowledgement This work was supported by the U.S. National Science Foundation (NSF) Award No. ECCS-1931088. S.L. and H.W.S. acknowledge the support from the Improvement of Measurement Standards and Technology for Mechanical Metrology (Grant No. 22011044) by KRISS. References [1] Younget al.,IEEE Computational Intelligence Magazine,vol. 13, no. 3, pp. 55-75, 2018. [2] Hadsellet al.,Journal of Field Robotics,vol. 26, no. 2, pp. 120-144, 2009. [3] Najafabadiet al.,Journal of Big Data,vol. 2, no. 1, p. 1, 2015. [4] Zhaoet al.,Applied Physics Reviews,vol. 7, no. 1, 2020. [5] Zidanet al.,Nature Electronics,vol. 1, no. 1, pp. 22-29, 2018. [6] Wulfet al.,SIGARCH Comput. Archit. News,vol. 23, no. 1, pp. 20–24, 1995. [7] Wilkes,SIGARCH Comput. Archit. News,vol. 23, no. 4, pp. 4–6, 1995. [8] Ielminiet al.,Nature Electronics,vol. 1, no. 6, pp. 333-343, 2018. [9] Changet al.,Nano Letters,vol. 10, no. 4, pp. 1297-1301, 2010. [10] Qinet al., Physica Status Solidi (RRL) - Rapid Research Letters, pssr.202200075R1, In press, 2022.more » « less
-
Bacterial spores have outstanding properties from the materials science perspective, which allow them to survive extreme environmental conditions. Recent work by [S. G. Harrellsonet al.,Nature619, 500–505 (2023)] studied the mechanical properties ofBacillus subtilisspores and the evolution of these properties with the change of humidity. The experimental measurements were interpreted assuming that the spores behave as water-filled porous solids, subjected to hydration forces. Here, we revisit their experimental data using literature data on vapor sorption on spores and ideas from polymer physics. We demonstrate that upon the change of humidity, the spores behave like rubber with respect to their swelling, elasticity, and relaxation times. This picture is consistent with the knowledge of the materials comprising the bacterial cell walls—cross-linked peptidoglycan. Our results provide an interpretation of the mechanics of bacterial spores and can help in developing synthetic materials mimicking the mechanical properties of the spores.more » « less
