An official website of the United States government
Whether Earth materials exhibit frictional creep or catastrophic failure is a crucial but unresolved problem in predicting landslide and earthquake hazards. Here, we show that field-scale observations of sliding velocity and pore water pressure at two creeping landslides are explained by velocity-strengthening friction, in close agreement with laboratory measurements on similar materials. This suggests that the rate-strengthening friction commonly measured in clay-rich materials may govern episodic slow slip in landslides, in addition to tectonic faults. Further, our results show more generally that transient slow slip can arise in velocity-strengthening materials from modulation of effective normal stress through pore pressure fluctuations. This challenges the idea that episodic slow slip requires a narrow range of transitional frictional properties near the stability threshold, or pore pressure feedbacks operating on initially unstable frictional slip.
more »
« less
Modelling seasonal landslide motion: Does it only depend on fluctuations in normal effective stress?
Abstract Landslide motion is often simulated with interface‐like laws able to capture changes in frictional strength caused by the growth of the pore water pressure and the consequent reduction of the effective stress normal to the plane of sliding. Here it is argued that, although often neglected, the evolution of all the 3D stress components within the basal shear zone of landslides also contributes to changes in frictional strength and must be accounted for to predict changes in seasonal velocity. For this purpose, an augmented sliding‐consolidation model is proposed which allows for the computation of excess pore pressure development and downslope sliding with any constitutive law with 3D stress evolution. Simulations of idealised infinite slope models subjected to hydrologic forcing are used to study the role of in‐situ stress conditions and stress rate multiaxiality. Specifically, a Drucker‐Prager perfectly plastic model is used to replicate frictional failure and shear deformation at the base of landslides. The model reveals that conditions amenable to the shearing of a frictional interface are met only after numerous rainfall cycles, that is, when multiaxial stress rates are suppressed. In this case, the landslide is predicted to move through a seasonal ratcheting controlled only by the effective stress component normal to the plane of sliding. By contrast, in newly formed landslides, the multiaxial stress evolution is found to produce further regimes of motion, from plastic shakedown to cyclic failure, neither of which can be captured by interface‐like frictional laws. Notably, the model suggests that a transition across these regimes can emerge in response to an aggravation of the magnitude of forcing, implying that (i) fluctuations in climate may alter the seasonal trends of motion observed today; (ii) our ability to quantify landslide‐induced risks is impaired unless proper geomechanical models are used to examine their long‐term dynamics.
more »
« less
- Award ID(s):
- 1854951
- PAR ID:
- 10473995
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- International Journal for Numerical and Analytical Methods in Geomechanics
- Volume:
- 47
- Issue:
- 18
- ISSN:
- 0363-9061
- Format(s):
- Medium: X Size: p. 3331-3350
- Size(s):
- p. 3331-3350
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Predicting rainfall‐induced landslide motion is challenging because shallow groundwater flow is extremely sensitive to the preexisting moisture content in the ground. Here, we use groundwater hydrology theory and numerical modeling combined with five years of field monitoring to illustrate how unsaturated groundwater flow processes modulate the seasonal pore water pressure rise and therefore the onset of motion for slow‐moving landslides. The onset of landslide motion at Oak Ridge earthflow in California’s Diablo Range occurs after an abrupt water table rise to near the landslide surface 52–129 days after seasonal rainfall commences. Model results and theory suggest that this abrupt rise occurs from the advection of a nearly saturated wetting front, which marks the leading edge of the integrated downward flux of seasonal rainfall, to the water table. Prior to this abrupt rise, we observe little measured pore water pressure response within the landslide due to rainfall. However, once the wetting front reaches the water table, we observe nearly instantaneous pore water pressure transmission within the landslide body that is accompanied by landslide acceleration. We cast the timescale to reach a critical pore water pressure threshold using a simple mass balance model that considers variable moisture storage with depth and explains the onset of seasonal landslide motion with a rainfall intensity‐duration threshold. Our model shows that the seasonal response time of slow‐moving landslides is controlled by the dry season vadose zone depth rather than the total landslide thickness.more » « less
-
Abstract Frictional sliding along grain boundaries in brittle shear zones can result in the fragmentation of individual grains, which ultimately can impact slip dynamics. During deformation at small scales, stick–slip motion can occur between grains when existing force chains break due to grain rearrangement or failure, resulting in frictional sliding of granular material. The rearrangement of the grains leads to dilation of the granular package, reducing the shear stress and subsequently leading to slip. Here, we conduct physical experiments employing HydroOrbs, an elasto-plastic material, to investigate grain comminution in granular media under simple shear conditions. Our findings demonstrate that the degree of grain comminution is dependent on both the normal force and the size of the grains. Using the experimental setup, we benchmark Discrete Element Method (DEM) numerical models, which are capable of simulating the movement, rotation, and fracturing of elasto-plastic grains subjected to simple shear. The DEM models successfully replicate both grain comminution patterns and horizontal force fluctuations observed in our physical experiments. They show that increasing normal forces correlate with higher horizontal forces and more fractured grains. The ability of our DEM models to accurately reproduce experimental results opens up new avenues for investigating various parameter spaces that may not be accessible through traditional laboratory experiments, for example, in assessing how internal friction or cohesion affect deformation in granular systems.more » « less
-
Abstract Like faults, landslides can slip slowly for decades or accelerate catastrophically. However, whereas experimentally derived friction laws provide mechanistically based explanations for similarly diverse behavior on faults, little monitoring exists over the temporal and spatial scales required to more clearly illuminate the mechanics of landslide friction. Here we show that displacement of an active slow landslide is accommodated primarily through mm‐scale stick‐slip events that recur on timescales of minutes to hours on asperities that are small (<100 m) relative to the landslide. The frequency of slip events tracks both landslide velocity and pore fluid pressure. The stick‐slip nature demonstrates by itself that slow slip is governed, at least in part, by velocity‐weakening frictional asperities. This observation, in combination with the sensitivity of slow slip to pore fluid pressure and the small relative scale of asperities, suggests similarities between slow slip in landslides and episodic slow slip along faults.more » « less
-
Abstract Regional‐scale characterization of shallow landslide hazards is important for reducing their destructive impact on society. These hazards are commonly characterized by (a) their location and likelihood using susceptibility maps, (b) landslide size and frequency using geomorphic scaling laws, and (c) the magnitude of disturbance required to cause landslides using initiation thresholds. Typically, this is accomplished through the use of inventories documenting the locations and triggering conditions of previous landslides. In the absence of comprehensive landslide inventories, physics‐based slope stability models can be used to estimate landslide initiation potential and provide plausible distributions of landslide characteristics for a range of environmental and forcing conditions. However, these models are sometimes limited in their ability to capture key mechanisms tied to discrete three‐dimensional (3D) landslide mechanics while possessing the computational efficiency required for broad‐scale application. In this study, the RegionGrow3D (RG3D) model is developed to broadly simulate the area, volume, and location of landslides on a regional scale (≥1,000 km2) using 3D, limit‐equilibrium (LE)‐based slope stability modeling. Furthermore, RG3D is incorporated into a susceptibility framework that quantifies landsliding uncertainty using a distribution of soil shear strengths and their associated probabilities, back‐calculated from inventoried landslides using 3D LE‐based landslide forensics. This framework is used to evaluate the influence of uncertainty tied to shear strength, rainfall scenarios, and antecedent soil moisture on potential landsliding and rainfall thresholds over a large region of the Oregon Coast Range, USA.more » « less
