An official website of the United States government
Two decades of onshore-offshore, ocean bottom seismometer and marine multi-channel seismic data are integrated to constrain the crustal structure of the entire Hikurangi subduction zone. Our method provides refined 3-D constraints on the width and properties of the frontal prism, the thickness and geological architecture of the forearc crust, and the crustal structure and geometry of the subducting Hikurangi Plateau to 40 km depth. Our results reveal significant along-strike changes in the distribution of rigid crustal rocks in the overthrusting plate and along-strike changes in the crustal thickness of the subducting Hikurangi Plateau. We also provide regional constraints on seismic structure in the vicinity of the subduction interface. In this presentation, we will describe our observations and integrate our tomographic model with residual gravity anomalies, onshore geology, and geodetic observations to describe the relationship between crustal structure and fault-slip behavior along the Hikurangi margin.
more »
« less
Heterogeneous Crustal Structure of the Hikurangi Plateau Revealed by SHIRE Seismic Data: Origin and Implications for Plate Boundary Tectonics
Abstract Marine multichannel and wide‐angle seismic data constrain the distribution of seamounts, sediment cover sequence and crustal structure along a 460 km margin‐parallel transect of the Hikurangi Plateau. Seismic reflection data reveals five seamount up‐to 4.5 km high and 35–75 km wide, with heterogeneous internal velocity structure. Sediment cover decreases south‐to‐north from ∼4.5 km to ∼1–2 km. The Hikurangi Plateau crust (VP5.5–7.5 km/s) is 11 ± 1 km thick in the south, but thins by 3–4 km further north (∼7–8 km). Gravity models constructed along two seismic lines show the reduction in crustal thickness persists further east, coinciding with a bathymetric scarp. Gravity data suggest the transition in crustal thickness may reflect spatial variability in deformation and lithospheric extension associated with plateau breakup. Variability in the thickness of subducting crust may contribute to differences in megathrust geometry, upper‐plate stress state and high‐rates of contraction and uplift along the southern Hikurangi margin.
more »
« less
- Award ID(s):
- 1949171
- PAR ID:
- 10476049
- Publisher / Repository:
- DOI PREFIX: 10.1029
- Date Published:
- Journal Name:
- Geophysical Research Letters
- Volume:
- 50
- Issue:
- 22
- ISSN:
- 0094-8276
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
NA (Ed.)Abstract Four decades of seismic reflection, onshore‐offshore and ocean‐bottom seismic data are integrated to constrain a high‐resolution 3‐D P‐wave velocity model of the Hikurangi subduction zone. Our model shows wavespeeds in the offshore forearc to be 0.5–1 km/s higher in south Hikurangi than in the central and northern segments (VP ≤ 4.5 km/s). Correlation with onshore geology and seismic reflection data sets suggest wavespeed variability in the overthrusting plate reflects the spatial distribution of Late Jurassic basement terranes. The crustal backstop is 25–35 km from the deformation front in south Hikurangi, but this distance abruptly increases to ∼105 km near Cape Turnagain. This change in backstop position coincides with the southern extent of shallow slow‐slip, most of which occurs updip of the backstop along the central and northern margin. These relationships suggest the crustal backstop may impact the down‐dip extent of shallow conditional stability on the megathrust and imply a high likelihood of near/trench‐breaching rupture in south Hikurangi. North of Cape Turnagain, the more landward position of the backstop, in conjunction with a possible reduction in the depth of the brittle ductile transition, reduces the down‐dip width of frictional locking between the southern (∼100 km) and central Hikurangi margin by up‐to 50%. Abrupt transitions in overthrusting plate structure are resolved near Cook Strait, Gisborne and across the northern Raukumara Peninsula, and appear related to tectonic inheritance and the evolution of the Hikurangi margin. Extremely low forearc wavespeeds resolved north of Gisborne played a key role in producing long durations of long‐period earthquake ground motions.more » « less
-
New Zealand's Hikurangi margin is known for recurring shallow slow slip, numerous forearc seeps, and a productive volcanic arc. Fluids derived from the subducting slab are implicated in these processes. However, prior studies lacked evidence of basic crustal structure of the slab, or of its water content that would allow an assessment of fluid budgets. We review several recent studies that place bounds on the fluid reservoirs within the subducting Hikurangi Plateau that could be released between the forearc and backarc regions. Subducting sediments are thickest (> 1 km) in the southern Hikurangi margin, where there is a unit of turbidites beneath the regional proto decollement. These subducting sediments begin draining near the deformation front, resulting in a 20-30 % loss of volumetric fluid content. In contrast, the central and northern Hikurangi margins lack a continuous unit of subducting sediment. Here, lenses of poorly drained sediment underthrust the forearc in the wakes of seamount collisions. The Hikurangi Plateau's crustal structure resembles normal oceanic crust with a doubled upper crust of basalt and diabase. Above this upper crust is a ~1.5 km thick unit of hydrated volcaniclastic conglomerates. Seamounts can locally increase the upper crust's thickness by an extra ~1-3 km, raising the amount of porous, altered volcanic material. Finally, P-wave velocity models of the slab's upper mantle show velocity changes that could indicate moderate differences in serpentinization. Active bend-faults that could circulate fluids to the upper mantle are sparse prior to subduction. However, upon subduction the upper mantle seismic velocities of the Hikurangi Plateau are significantly less in the north compared to the south, possibly due to enhanced slab faulting beneath the forearc. Separate thermo-petrologic models for the shallow forearc and deeper subduction system suggests that fluid release from volcaniclastic units and the thickened Hikurangi Plateau upper crust is expected to occur over a range of depths extending from ~12 km to ~130 km, providing fluids for onshore seep systems and hydrous melting of the mantle wedge, whereas dehydration of serpentinite is greatest beyond the arc front. Subducting sediments and volcaniclastic units are the most readily available source of fluids for shallow slow slip.more » « less
-
The Hikurangi margin of New Zealand exhibits contrasting slip behavior from south to north. Whereas the southern Hikurangi margin has a locked plate boundary that can potentially produce large megathrust earthquakes, the northern section of this margin accommodates plate motion by creep and recurring shallow slow-slip events. To investigate these different modes of slip we use marine seismic reflection data to image the reflectivity and seismic velocity structure along profiles across the accretionary wedge. Seismic veloc¬ity images up to 12 km deep and prestack depth migrations together charac¬terize the nature of incoming basement, sediment subduction and accretion, and faulting and compaction of the accretionary wedge. Our seismic velocity models show that a layer of sediment,with seismic wavespeeds of ~3.5 km/s, is entrained beneath the accretionary prism in the southern Hikurangi margin, but there is no coherent subducted sediment layer to the north. This is a significant result, because it implies that the sedi¬ment layer covers basement roughness and forms a smoother plate boundary in the south. In addition, the deepest sediments on the incoming plate in the southern Hikurangi margin are believed to be quartz-rich turbidites, which are prone to unstable slip along the plate boundary. In contrast, the accre¬tionary prism of the northern Hikurangi margin exhibits more variation in accretionary wedge thrust geometry due to interactions with large seamounts on the downgoing oceanic basement. These findings are consistent with the geodetically locked nature of a smooth, quartz-rich plate boundary along the southern Hikurangi subduction zone, and the creeping nature of a heteroge¬neous plate boundary along the Hikurangi margin to the north.more » « less
-
The Hikurangi margin of New Zealand exhibits contrasting slip behavior from south to north. Whereas the southern Hikurangi margin has a locked plate boundary that can potentially produce large megathrust earthquakes, the northern section of this margin accommodates plate motion by creep and episodic shallow slow-slip events. To investigate these different modes of slip we examine the geometry of the plate boundary and consolidation state of the materials along the plate interface. We use marine seismic reflection data from the SHIRE project to image the reflectivity and seismic velocity structure along 20 profiles across the accretionary wedge of the Hikurangi subduction zone of New Zealand. These active-source seismic data were gathered in 2017 with the R/V Marcus Langseth using a 6,600 in3 seismic source and 12 km long receiver array. We carried out streamer tomography on the SHIRE profiles where we integrated seismic velocity constraints from stacking the reflection data along all SHIRE transects. The seismic velocity images and prestack depth migrations together characterize the nature of incoming basement, sediment subduction and accretion, and faulting and compaction of the accretionary wedge. Our seismic velocity models show that a layer of sediment,with seismic wavespeeds of ~3.0 km/s, is entrained beneath the accretionary prism in the southern Hikurangi margin, but there is no coherent subducted sediment layer to the north. This is a significant result, because it implies that the sediment layer covers basement roughness and forms a smoother plate boundary in the south. In addition, the deepest sediments on the incoming plate in the southern Hikurangi margin are believed to be quartz-rich turbidites, which are prone to unstable slip along the plate boundary. In contrast, the accretionary prism of the northern Hikurangi margin exhibits more variation in accretionary wedge thrust geometry due to interactions with large seamounts on the downgoing oceanic basement. These findings are consistent with the geodetically locked nature of a smooth, quartz-rich plate boundary along the southern Hikurangi subduction zone, and the creeping nature of a heterogeneous plate boundary along the Hikurangi margin to the north.more » « less
