An official website of the United States government
New Zealand's Hikurangi margin is known for recurring shallow slow slip, numerous forearc seeps, and a productive volcanic arc. Fluids derived from the subducting slab are implicated in these processes. However, prior studies lacked evidence of basic crustal structure of the slab, or of its water content that would allow an assessment of fluid budgets. We review several recent studies that place bounds on the fluid reservoirs within the subducting Hikurangi Plateau that could be released between the forearc and backarc regions. Subducting sediments are thickest (> 1 km) in the southern Hikurangi margin, where there is a unit of turbidites beneath the regional proto decollement. These subducting sediments begin draining near the deformation front, resulting in a 20-30 % loss of volumetric fluid content. In contrast, the central and northern Hikurangi margins lack a continuous unit of subducting sediment. Here, lenses of poorly drained sediment underthrust the forearc in the wakes of seamount collisions. The Hikurangi Plateau's crustal structure resembles normal oceanic crust with a doubled upper crust of basalt and diabase. Above this upper crust is a ~1.5 km thick unit of hydrated volcaniclastic conglomerates. Seamounts can locally increase the upper crust's thickness by an extra ~1-3 km, raising the amount of porous, altered volcanic material. Finally, P-wave velocity models of the slab's upper mantle show velocity changes that could indicate moderate differences in serpentinization. Active bend-faults that could circulate fluids to the upper mantle are sparse prior to subduction. However, upon subduction the upper mantle seismic velocities of the Hikurangi Plateau are significantly less in the north compared to the south, possibly due to enhanced slab faulting beneath the forearc. Separate thermo-petrologic models for the shallow forearc and deeper subduction system suggests that fluid release from volcaniclastic units and the thickened Hikurangi Plateau upper crust is expected to occur over a range of depths extending from ~12 km to ~130 km, providing fluids for onshore seep systems and hydrous melting of the mantle wedge, whereas dehydration of serpentinite is greatest beyond the arc front. Subducting sediments and volcaniclastic units are the most readily available source of fluids for shallow slow slip.
more »
« less
3D Crustal Structure of the Hikurangi Subduction Zone revealed by Two Decades of Onshore-Offshore and Multi-Channel Seismic Data: Implications for Megathrust Slip Behaviour
Two decades of onshore-offshore, ocean bottom seismometer and marine multi-channel seismic data are integrated to constrain the crustal structure of the entire Hikurangi subduction zone. Our method provides refined 3-D constraints on the width and properties of the frontal prism, the thickness and geological architecture of the forearc crust, and the crustal structure and geometry of the subducting Hikurangi Plateau to 40 km depth. Our results reveal significant along-strike changes in the distribution of rigid crustal rocks in the overthrusting plate and along-strike changes in the crustal thickness of the subducting Hikurangi Plateau. We also provide regional constraints on seismic structure in the vicinity of the subduction interface. In this presentation, we will describe our observations and integrate our tomographic model with residual gravity anomalies, onshore geology, and geodetic observations to describe the relationship between crustal structure and fault-slip behavior along the Hikurangi margin.
more »
« less
- Award ID(s):
- 1949171
- PAR ID:
- 10593415
- Publisher / Repository:
- AGU
- Date Published:
- Edition / Version:
- 1
- Page Range / eLocation ID:
- 1
- Format(s):
- Medium: X
- Location:
- San Francisco
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Marine multichannel and wide‐angle seismic data constrain the distribution of seamounts, sediment cover sequence and crustal structure along a 460 km margin‐parallel transect of the Hikurangi Plateau. Seismic reflection data reveals five seamount up‐to 4.5 km high and 35–75 km wide, with heterogeneous internal velocity structure. Sediment cover decreases south‐to‐north from ∼4.5 km to ∼1–2 km. The Hikurangi Plateau crust (VP5.5–7.5 km/s) is 11 ± 1 km thick in the south, but thins by 3–4 km further north (∼7–8 km). Gravity models constructed along two seismic lines show the reduction in crustal thickness persists further east, coinciding with a bathymetric scarp. Gravity data suggest the transition in crustal thickness may reflect spatial variability in deformation and lithospheric extension associated with plateau breakup. Variability in the thickness of subducting crust may contribute to differences in megathrust geometry, upper‐plate stress state and high‐rates of contraction and uplift along the southern Hikurangi margin.more » « less
-
The Hikurangi margin has been an important global focus for subduction zone research for the last decade. International Ocean Discovery Program drilling and geophysical investigations have advanced our understanding of megathrust slip behavior. Along and across the margin, detailed imaging reveals that the megathrust structure varies spatially and evolves over time. Heterogeneous properties of the plate boundary zone and overriding plate are impacted by the evolving nature of regional tectonics and inherited overriding plate structure. Along-strike variability in thickness of subducting sediment and northward increasing influence of seamount subduction strongly influence mega-thrust lithologies, fluid pressure, and permeability structure. Together, these exert strong control on spatial variations in coupling, slow slip, and seismicity distribution. Thicker incoming sediment, combined with a compressional upper plate, influences deeper coupling at southern Hikurangi, where paleoseismic investigations reveal recurring great (Mw> 8.0) earthquakes.▪The Hikurangi Subduction Zone is marked by large-scale changes in the subducting Pacific Plate and the overlying plate, with varied tectonic stress, crustal thickness, and sediment cover.▪The roughness of the lower plate influences the variability in megathrust slip behavior, particularly where seamounts enhance subduction of fluid-rich sediments.▪Variations in sediment composition impact the strength of the subduction interface, with the southern Hikurangi Subduction Zone exhibiting a more uniform megathrust fault.▪Properties of the upper plate influence fluid pressures and contribute to the observed along-strike variations in Hikurangi plate coupling and slip behavior.more » « less
-
This study addresses a significant gap in understanding the features of the south‐central Cascadia subduction zone, a region characterized by complex geologic, tectonic, and seismic transitions both offshore and onshore. Unlike other segments along this margin, this area lacks a 3‐D velocity model to delineate its structural and geological features on a fine scale. To address this void, we developed a high‐resolution 3‐D P‐wave velocity model using active source seismic data from ship‐borne seismic shots recorded on temporary and permanent onshore seismic stations and ocean‐bottom seismometers. Our model shows velocity variations across the region with distinct velocity‐depth profiles for the Siletz, Franciscan, and Klamath terranes in the overlying plate. We identified seaward dipping high‐velocity static backstops associated with the Siletz and Klamath terranes, situated near the shoreline and further inland, respectively. Regions of reduced crustal velocity are associated with crustal faults. Moreover, there is significant along‐strike depth variation in the subducting slab, which is about 4 km deeper near the thick, dense Siletz terrane and becomes shallower near the predominantly less‐dense Franciscan terrane. This highlights a sudden tectonic and geologic transition at the southern boundary of the Siletz terrane. Our velocity model also indicates slightly increased hydration, though still minimal, in both the oceanic crust and the upper mantle of the subducting plate compared to other parts of the margin.more » « less
-
Abstract The southern Hikurangi subduction zone exhibits significant along‐strike variation in convergence rate and obliquity, sediment thickness and, uniquely, the increasing proximity of southern Hikurangi to, and impingement on, the incoming continental Chatham Rise, an ancient Gondwana accretionary complex. There are corresponding changes in the morphology and structure of the Hikurangi accretionary prism. We combine widely spaced multichannel seismic reflection profiles with high resolution bathymetry and previous interpretations to characterize the structure and the history of the accretionary prism since 2 Ma. The southern Hikurangi margin can be divided into three segments. A northeastern segment (A) characterized by a moderately wide (∼70 km), low taper (∼5°) prism recording uninhibited outward growth in the last ∼1 Myr. Deformation resolvable in seismic reflection data accounts for ∼20 % of plate convergence, comparable with the central Hikurangi margin further North. A central segment (B) characterized by a narrow (∼30 km), moderate taper (∼8°) prism, with earlier (∼2‐∼1 Ma) shortening than segment A. Outward prism growth ceased coincidentally with development of major strike‐slip faults in the prism interior, reduced margin‐normal convergence rate, and the onset of impingement on the incoming Chatham Rise to the south. A southwestern segment (C) marks the approximate southern termination of subduction but widens to ∼50 km due to rapid outward migration of the deformation front via fault reactivation within the now‐underthrusting corner of the Chatham Rise. Segment C exhibits minimal shortening as margin‐normal subduction velocity decreases and plate motion is increasingly taken up by interior thrusts and strike‐slip faults.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- The DOI is not currently available.
