An official website of the United States government
Abstract Van der Waals (vdW) materials are an indispensable part of functional device technology due to their versatile physical properties and ease of exfoliating to the low‐dimensional limit. Among all the compounds investigated so far, the search for magnetic vdW materials has intensified in recent years, fueled by the realization of magnetism in 2D. However, metallic magnetic vdW systems are still uncommon. In addition, they rarely host high‐mobility charge carriers, which is an essential requirement for high‐speed electronic applications. Another shortcoming of 2D magnets is that they are highly air sensitive. Using chemical reasoning, TaCo2Te2is introduced as an air‐stable, high‐mobility, magnetic vdW material. It has a layered structure, which consists of Peierls distorted Co chains and a large vdW gap between the layers. It is found that the bulk crystals can be easily exfoliated and the obtained thin flakes are robust to ambient conditions after 4 months of monitoring using an optical microscope. Signatures of canted antiferromagntic behavior are also observed at low‐temperature. TaCo2Te2shows a metallic character and a large, nonsaturating, anisotropic magnetoresistance. Furthermore, the Hall data and quantum oscillation measurements reveal the presence of both electron‐ and hole‐type carriers and their high mobility.
more »
« less
Anisotropic and High‐Mobility Electronic Transport in a Quasi 2D Antiferromagnet NdSb 2
Abstract Advancements in low‐dimensional functional device technology heavily rely on the discovery of suitable materials which have interesting physical properties as well as can be exfoliated down to the 2D limit. Exfoliable high‐mobility magnets are one such class of materials that, not due to lack of effort, has been limited to only a handful of options. So far, most of the attention has been focused on the van der Waals (vdW) systems. However, even within the non‐vdW, layered materials, it is possible to find all these desirable features. Using chemical reasoning, it is found that NdSb2is an ideal example. Even with a relatively small interlayer distance, this material can be exfoliated down to few layers. NdSb2has an antiferromagnetic ground state with a quasi 2D spin arrangement. The bulk crystals show a very large, non‐saturating magnetoresistance along with highly anisotropic electronic transport properties. It is confirmed that this anisotropy originates from the 2D Fermi pockets which also imply a rather quasi 2D confinement of the charge carrier density. Both electron and hole‐type carriers show very high mobilities. The possible non‐collinear spin arrangement also results in an anomalous Hall effect.
more »
« less
- PAR ID:
- 10476578
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Functional Materials
- Volume:
- 34
- Issue:
- 10
- ISSN:
- 1616-301X
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Heterogeneous integrations of functionally and chemically distinct materials have been explored to develop promising building blocks for opto‐electronic device applications. Recently, the Van der Waals (vdW)‐assembly of near atom thickness materials has provided excellent opportunities beyond what has been previously been difficult to realize. However, its up‐to‐date demonstrations remain far from achieving the scalability and versatility demanded for practical device applications, that is, the integration is generally demonstrated with intrinsically layered 2D materials of very small lateral dimensions. Herein, the large centimeter‐scale vdW assembly of two different materials with structurally, chemically, and functionally distinct properties, that is, 2D platinum ditelluride (PtTe2) metallic multilayers and non‐layered 3D semiconducting platinum sulfide (PtS) are reported. Both materials are precisely delaminated from their growth wafers inside water and are subsequently integrated on unconventional substrates of desired functionalities. The large‐area vdW‐assembled 2D/3D PtTe2/PtS hetero‐materials on flexible substrates exhibit an excellent photodetection in a spectral range of visible‐to‐near infrared (NIR) wavelength, which is well preserved under severe mechanical deformation. This study paves the way for exploring large‐area flexible opto‐electronic devices solely based on near atom thickness materials.more » « less
-
Abstract Van der Waals (vdW) material Fe 5 GeTe 2 , with its long-range ferromagnetic ordering near room temperature, has significant potential to become an enabling platform for implementing novel spintronic and quantum devices. To pave the way for applications, it is crucial to determine the magnetic properties when the thickness of Fe 5 GeTe 2 reaches the few-layers regime. However, this is highly challenging due to the need for a characterization technique that is local, highly sensitive, artifact-free, and operational with minimal fabrication. Prior studies have indicated that Curie temperature T C can reach up to close to room temperature for exfoliated Fe 5 GeTe 2 flakes, as measured via electrical transport; there is a need to validate these results with a measurement that reveals magnetism more directly. In this work, we investigate the magnetic properties of exfoliated thin flakes of vdW magnet Fe 5 GeTe 2 via quantum magnetic imaging technique based on nitrogen vacancy centers in diamond. Through imaging the stray fields, we confirm room-temperature magnetic order in Fe 5 GeTe 2 thin flakes with thickness down to 7 units cell. The stray field patterns and their response to magnetizing fields with different polarities is consistent with previously reported perpendicular easy-axis anisotropy. Furthermore, we perform imaging at different temperatures and determine the Curie temperature of the flakes at ≈300 K. These results provide the basis for realizing a room-temperature monolayer ferromagnet with Fe 5 GeTe 2 . This work also demonstrates that the imaging technique enables rapid screening of multiple flakes simultaneously as well as time-resolved imaging for monitoring time-dependent magnetic behaviors, thereby paving the way towards high throughput characterization of potential two-dimensional (2D) magnets near room temperature and providing critical insights into the evolution of domain behaviors in 2D magnets due to degradation.more » « less
-
Van der Waals (vdW) materials have recently attracted significant interest in the context of orientation-dependent linear and nonlinear optical properties. Recently, arsenic trisulfide (As2S3) or orpiment is identified as a new vdW layered material having anisotropic vibrational and optomechanical responses due to the reduced in-plane crystal symmetry, but its nonlinear optical response is still not well understood yet. Herein, the anisotropic third-harmonic generation (THG) response of mechanically exfoliated As2S3thin flakes is reported. The polarization-dependent evolution of THG emission from butterfly-shaped pattern to four-lobe pattern is comprehensively explored. Moreover, the third-order nonlinear susceptibility of As2S3crystal is extracted by analyzing the thickness-dependent THG emission. We anticipate that the discussed results will not only update the existing understanding on the nonlinear light-matter interaction in anisotropic vdW materials, but also promote future applications in integrated photonic circuits, on-chip nonlinear signal processing, and polarization-sensitive optical devices.more » « less
-
Abstract The van der Waals magnets CrX3(X = I, Br, and Cl) exhibit highly tunable magnetic properties and are promising candidates for developing novel two‐dimensional (2D) spintronic devices such as magnetic tunnel junctions and spin tunneling transistors. Previous studies of the antiferromagnetic CrCl3have mainly focused on mechanically exfoliated samples. Controlled synthesis of high quality atomically thin flakes is critical for their technological implementation but has not been achieved to date. This work reports the growth of large CrCl3flakes down to monolayer thickness via the physical vapor transport technique. Both isolated flakes with well‐defined facets and long stripe samples with the trilayer portion exceeding 60 µm have been obtained. High‐resolution transmission electron microscopy studies show that the CrCl3flakes are single crystalline in the monoclinic structure, consistent with the Raman results. The room temperature stability of the CrCl3flakes decreases with decreasing thickness. The tunneling magnetoresistance of graphite/CrCl3/graphite tunnel junctions confirms that few‐layer CrCl3possesses in‐plane magnetic anisotropy and Néel temperature of 17 K. This study paves the path for developing CrCl3‐based scalable 2D spintronic applications.more » « less
