An official website of the United States government
Incorporation of nanoparticles into polymer blend films can lead to a synergistic combination of properties and functionalities. Adding a large concentration of nanoparticles into a polymer blend matrix via conventional melting or solution blending techniques, however, is challenging due to the tendency of particles to aggregate. Herein, we report a straightforward approach to generate polymer blend/nanoparticle ternary composite films with extremely high loadings of nanoparticles based on monomer-driven infiltration of polymer and photopolymerization. The fabrication process consists of three steps: (1) preparing a bilayer with a nanoparticle (NP) layer atop a polymer layer, (2) annealing of the bilayer with a vapour mixture of a monomer and a photoinitiator, which undergoes capillary condensation and imparts mobility to the polymer layer and (3) exposing this film to UV light to induce photopolymerization of the monomer. The monomer used in this process is chemically different from the repeat unit of the polymer in the bilayer and is a good solvent for the polymer. The second step leads to the infiltration of the plasticized polymer, and the third step results in a blend of two polymers in the interstices of the nanoparticle layer. By varying the thickness ratio of the polymer and nanoparticle layers in the initial bilayers and changing the UV exposure duration, the volume fraction of the two polymers in the composite films can be adjusted. This versatile approach enables the design and engineering of a new class of nanocomposite films that contain a nanoscale-blend of two polymers in the interstices of a nanoparticle film, which could have combinations of unique mechanical and transport properties desirable for advanced applications such as membrane separations, conductive composite films and solar cells. Moreover, these polymer blend-filled nanoparticle films could serve as model systems to study the effect of confinement on the miscibility and morphology of polymer blends.
more »
« less
Blends of Conjugated and Adhesive Polymers for Sticky Organic Thin‐Film Transistors
Abstract Here, a polymer blend active layer that exhibits both electronic and adhesive properties is introduced. Various conjugated polymers are blended with a catechol‐based polymer that shows high adhesion, such that blends serve as the active layer of multifunctional sticky organic thin‐film transistors (OTFTs). Blend films maintain relatively constant field‐effect charge carrier mobility in OTFTs regardless of composition. Lap shear adhesion strength tests show that all blend films exhibit adhesive properties with adhesion values ranging from 0.05 to 4.30 MPa. With relatively consistent mobility and the presence of adhesive properties at different compositions, blends of conjugated and adhesive polymers can lead to next‐generation organic transistors for stable 3D stacking and waterproof adhesive sensors.
more »
« less
- Award ID(s):
- 1921854
- PAR ID:
- 10478789
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Electronic Materials
- Volume:
- 9
- Issue:
- 12
- ISSN:
- 2199-160X
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Highly crystalline thin films in organic semiconductors are important for applications in high‐performance organic optoelectronics. Here, the effect of grain boundaries on the Hall effect and charge transport properties of organic transistors based on two exemplary benchmark systems is elucidated: (1) solution‐processed blends of 2,7‐dioctyl[1]benzothieno[3,2‐b][1]benzothiophene (C8‐BTBT) small molecule and indacenodithiophene‐benzothiadiazole (C16IDT‐BT) conjugated polymer, and (2) large‐area vacuum evaporated polycrystalline thin films of rubrene (C42H28). It is discovered that, despite the high field‐effect mobilities of up to 6 cm2V−1s−1and the evidence of a delocalized band‐like charge transport, the Hall effect in polycrystalline organic transistors is systematically and significantly underdeveloped, with the carrier coherence factor α < 1 (i.e., yields an underestimated Hall mobility and an overestimated carrier density). A model based on capacitively charged grain boundaries explaining this unusual behavior is described. This work significantly advances the understanding of magneto‐transport properties of organic semiconductor thin films.more » « less
-
Although high-temperature operation (i.e., beyond 150°C) is of great interest for many electronics applications, achieving stable carrier mobilities for organic semiconductors at elevated temperatures is fundamentally challenging. We report a general strategy to make thermally stable high-temperature semiconducting polymer blends, composed of interpenetrating semicrystalline conjugated polymers and high glass-transition temperature insulating matrices. When properly engineered, such polymer blends display a temperature-insensitive charge transport behavior with hole mobility exceeding 2.0 cm2/V·s across a wide temperature range from room temperature up to 220°C in thin-film transistors.more » « less
-
Spin casting has become an attractive method to fabricate polymer thin films found in organic electronic devices such as field-effect transistors, and light emitting diodes. Many studies have shown that altering spin casting parameters can improve device performance, which has been directly correlated to the degree of polymer alignment, crystallinity, and morphology of the thin film. To provide a thorough understanding of the balance of thermodynamic and kinetic factors that influence the stratification of polymer blend thin films, we monitor stratified polymer blend thin films developed from poly(3-hexylthiophene-2,5-diyl) and poly(methyl methacrylate) blends at controlled loading ratios, relative molecular weights, and casting speed. The structures of these thin films were characterized via neutron reflectivity, and the results show that at the fastest casting speed, polymer–polymer interactions and surface energy of the polymers in the blend dictate the final film structure, and at the slowest casting speed, there is less control over the film layering due to the polymer–polymer interactions, surface energy, and entropy simultaneously driving stratification. As well, the relative solubility limits of the polymers in the pre-deposition solution play a role in the stratification process at the slowest casting speed. These results broaden the current understanding of the relationship between spin casting conditions and vertical phase separation in polymer blend thin films and provide a foundation for improved rational design of polymer thin film fabrication processes to attain targeted stratification, and thus performance.more » « less
-
The nanoscale structure and macroscopic morphology of π-conjugated polymers are very important for their electronic application. While ordered single crystals of small molecules have been obtained via solution deposition, macroscopically aligned films of π-conjugated polymers deposited directly from solution have always required surface modification or complex pre-deposition processing of the solution. Here, ordered nanowires were obtained via shear-enhanced crystallization of π-conjugated polymers at the air–liquid–solid interface using simple deposition of the polymer solution onto an inclined substrate. The formation of macroscopically aligned nanowire arrays was found to be due to the synergy between intrinsic (π-conjugated backbone) and external (crystallization conditions) effects. The oriented nanowires showed remarkable improvement in the charge carrier mobility compared to spin-coated films as characterized in organic field-effect transistors (OFETs). Considering the simplicity and large-scale applicability, shear-enhanced crystallization of π-conjugated polymers provides a promising strategy to achieve high-performance polymer semiconductor films for electronics applications.more » « less
