An official website of the United States government
Abstract Block copolymer brushes are of great interest due to their rich phase behavior and value‐added properties compared to homopolymer brushes. Traditional synthesis involves grafting‐to and grafting‐from methods. In this work, a recently developed “polymer‐single‐crystal‐assisted‐grafting‐to” method is applied for the preparation of block copolymer brushes on flat glass surfaces. Triblock copolymer poly(ethylene oxide)‐b‐poly(l‐lactide)‐b‐poly(3‐(triethoxysilyl)propyl methacrylate) (PEO‐b‐PLLA‐b‐PTESPMA) is synthesized with PLLA as the brush morphology‐directing component and PTESPMA as the anchoring block. PEO‐b‐PLLA block copolymer brushes are obtained by chemical grafting of the triblock copolymer single crystals onto a glass surface. The tethering point and overall brush pattern are determined by the single crystal morphology. The grafting density is calculated to be ≈0.36 nm−2from the atomic force microscopy results and is consistent with the theoretic calculation based on the PLLA crystalline lattice. This work provides a new strategy to synthesize well‐defined block copolymer brushes.
more »
« less
Synthesis and applications of a Y‐inimer with two orthogonal controlled free radical polymerization initiators
Abstract We report the synthesis of a Y‐shaped inimer that contains two orthogonal initiators for ATRP and NMP. The inimer is synthesized through a one‐pot multi‐component reaction that vastly simplifies the typically cumbersome synthesis of similar compounds. The Y‐inimer has the versatility to be homopolymerized into a backbone for A/B Janus bottlebrush synthesis or copolymerized with glycidyl methacrylate (GMA) and cross‐linked into an ultra‐thin coating for mixed A/B brush growth from planar surfaces. Importantly, the Y‐shaped nature of the inimer ensures growth of A and B brushes are consistently in a 1:1 ratio. We demonstrate the application of the Y‐inimer in the synthesis of a PMMA/PS Janus bottlebrush as well as two different mixed A/B polymer brushes, one with the ability to microphase separate, and a second mixed polyelectrolyte brush with opposite charges. The inimer is compatible with various A/B monomer systems and offers a universal approach to the “grafting‐from” polymerization of dual vinyl polymer side chains. This study provides a unique way of utilizing multi‐component reactions in polymer chemistry to access complex functional architectures.
more »
« less
- Award ID(s):
- 2003891
- PAR ID:
- 10479965
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Journal of Polymer Science
- Volume:
- 61
- Issue:
- 24
- ISSN:
- 2642-4150
- Format(s):
- Medium: X Size: p. 3295-3306
- Size(s):
- p. 3295-3306
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Bottlebrush polymers, macromolecules consisting of dense polymer side chains grafted from a central polymer backbone, have unique properties resulting from this well-defined molecular architecture. With the advent of controlled radical polymerization techniques, access to these architectures has become more readily available. However, synthetic challenges remain, including the need for intermediate purification, the use of toxic solvents, and challenges with achieving long bottlebrush architectures due to backbone entanglements. Herein, we report hybrid bonding bottlebrush polymers (systems integrating covalent and noncovalent bonding of structural units) consisting of poly(sodium 4-styrenesulfonate) (p(NaSS)) brushes grafted from a peptide amphiphile (PA) supramolecular polymer backbone. This was achieved using photoinitiated electron/energy transfer-reversible addition–fragmentation chain transfer (PET-RAFT) polymerization in water. The structure of the hybrid bonding bottlebrush architecture was characterized using cryogenic transmission electron microscopy, and its properties were probed using rheological measurements. We observed that hybrid bonding bottlebrush polymers were able to organize into block architectures containing domains with high brush grafting density and others with no observable brushes. This finding is possibly a result of dynamic behavior unique to supramolecular polymer backbones, enabling molecular exchange or translational diffusion of monomers along the length of the assemblies. The hybrid bottlebrush polymers exhibited higher solution viscosity at moderate shear, protected supramolecular polymer backbones from disassembly at high shear, and supported self-healing capabilities, depending on grafting densities. Our results demonstrate an opportunity for novel properties in easily synthesized bottlebrush polymer architectures built with supramolecular polymers that might be useful in biomedical applications or for aqueous lubrication.more » « less
-
Abstract The challenge of fabricating transparent and conductive (T/C) films and patterns for applications in flexible electronics, touch screens, solar cells, and smart windows remains largely unsolved. Traditional fabrication techniques are complex, costly, time‐consuming, and struggle to achieve the necessary precision and accuracy over electronic and optical properties. Here, hypersurface photolithography (HP), which integrates microfluidics, a digital micromirror device, and photochemical surface‐initiated polymerizations is used to create polymer brush patterns. The high‐throughput optimization enabled by HP provides conditions to fabricate patterns composed of cross‐linked polymer brushes containing Au‐binding 2‐vinylpyrrolidine (2VP) groups with precise control over the height and the composition at each pixel. Au nanoparticles (AuNPs) are incorporated into the polymer brush patterns through in situ reduction of Au ions, resulting in T/C composite AuNP/polymer brush patterns. The sheet resistance at 100 mA of a 2VP‐AuNP‐functionalized patterns on a glass substrate is 0.42 Ω sq−1with 86% transmittance of visible light. Additional patterns demonstrate multiplexing by copatterning rhodamine B functionalized fluorescent polymer brushes and AuNP/polymer brush conductive domains. This work solves the challenge of creating T/C films by forming metal‐polymer composites from polymer brush patterns, offering a scalable solution for electronic and optical device development and fabrication.more » « less
-
null (Ed.)Networks formed by crosslinking bottlebrush polymers are a class of soft materials with stiffnesses matching that of ‘watery’ hydrogels and biological tissues but contain no solvents. Because of their extreme softness, bottlebrush polymer networks are often subject to large deformations. However, it is poorly understood how molecular architecture determines the extensibility of the networks. Using a combination of experimental and theoretical approaches, we discover that the yield strain γ y of the network equals the ratio of the contour length L max to the end-to-end distance R of the bottlebrush between two neighboring crosslinks: γ y = L max / R − 1. This relation suggests two regimes: (1) for stiff bottlebrush polymers, γ y is inversely proportional to the network shear modulus G , γ y ∼ G −1 , which represents a previously unrecognized regime; (2) for flexible bottlebrush polymers, γ y ∼ G −1/2 , which recovers the behavior of conventional polymer networks. Our findings provide a new molecular understanding of the nonlinear mechanics for soft bottlebrush polymer networks.more » « less
-
Abstract Chemical heterogeneity on biomaterial surfaces can transform its interfacial properties, rendering nanoscale heterogeneity profoundly consequential during bioadhesion. To examine the role played by chemical heterogeneity in the adsorption of viruses on synthetic surfaces, a range of novel coatings is developed wherein a tunable mixture of electrostatic tethers for viral binding, and carbohydrate brushes, bearing pendant α‐mannose, β‐galactose, or β‐glucose groups, is incorporated. The effects of binding site density, brush composition, and brush architecture on viral adsorption, with the goal of formulating design specifications for virus‐resistant coatings are experimentally evaluated. It is concluded that virus‐coating interactions are shaped by the interplay between brush architecture and binding site density, after quantifying the adsorption of adenoviruses, influenza, and fibrinogen on a library of carbohydrate brushes co‐immobilized with different ratios of binding sites. These insights will be of utility in guiding the design of polymer coatings in realistic settings where they will be populated with defects.more » « less
