An official website of the United States government
Background:Tumors infiltrating the precentral gyrus remain a unique operative challenge. In this study, we explored a novel approach for awake craniotomy involving a patient playing a drum pad during resection of low‐grade glioma, with the use of preoperative navigated transcranial magnetic stimulation (nTMS)–generated diffusion tensor imaging (DTI) and high‐density real‐time electrocorticography (ECoG). Observation:A 36‐year‐old left‐handed male with a low‐grade glioma in the left hemisphere hand knob region had a grand mal seizure. We combined preoperative nTMS‐DTI with intraoperative passive functional mapping using high‐density real‐time ECoG. During an awake craniotomy, the patient played a drum pad while we assessed somatosensory‐evoked potentials (SSEPs) using a 64‐channel ECoG grid. This confirmed the absence of motor‐evoked potentials (MEPs) over the tumor area, consistent with nTMS findings. Continuous monitoring of the patient’s drum pad performance during the resection allowed for a gross total resection (GTR) of the tumor. Following the resection, he experienced some weakness in the intrinsic muscles of his right hand, which returned to full normal function at 6 months. At the end of 1 year, he remained seizure‐free. Conclusion:A multimodal mapping strategy combined with awake monitoring of drum playing enabled preservation of function while achieving GTR in a patient with a motor‐eloquent glioma.
more »
« less
Intraoperative language mapping guided by real-time visualization of gamma band modulation electrocorticograms: Case report and proof of concept
Abstract BackgroundElectrocorticography (ECoG) language mapping is often performed extraoperatively, frequently involves offline processing, and relationships with direct cortical stimulation (DCS) remain variable. We sought to determine the feasibility and preliminary utility of an intraoperative language mapping approach guided by real-time visualization of electrocorticograms. MethodsA patient with astrocytoma underwent awake craniotomy with intraoperative language mapping, utilizing a dual iPad stimulus presentation system coupled to a real-time neural signal processing platform capable of both ECoG recording and delivery of DCS. Gamma band modulations in response to 4 language tasks at each electrode were visualized in real-time. Next, DCS was conducted for each neighboring electrode pair during language tasks. ResultsAll language tasks resulted in strongest heat map activation at an electrode pair in the anterior to mid superior temporal gyrus. Consistent speech arrest during DCS was observed for Object and Action naming tasks at these same electrodes, indicating good correspondence with ECoG heat map recordings. This region corresponded well with posterior language representation via preoperative functional MRI. ConclusionsIntraoperative real-time visualization of language task-based ECoG gamma band modulation is feasible and may help identify targets for DCS. If validated, this may improve the efficiency and accuracy of intraoperative language mapping.
more »
« less
- Award ID(s):
- 2124705
- PAR ID:
- 10485624
- Publisher / Repository:
- Oxford University Press
- Date Published:
- Journal Name:
- Neuro-Oncology Practice
- Volume:
- 11
- Issue:
- 1
- ISSN:
- 2054-2577
- Format(s):
- Medium: X Size: p. 92-100
- Size(s):
- p. 92-100
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
BackgroundAlthough conventional prediction models for surgical patients often ignore intraoperative time-series data, deep learning approaches are well-suited to incorporate time-varying and non-linear data with complex interactions. Blood lactate concentration is one important clinical marker that can reflect the adequacy of systemic perfusion during cardiac surgery. During cardiac surgery and cardiopulmonary bypass, minute-level data is available on key parameters that affect perfusion. The goal of this study was to use machine learning and deep learning approaches to predict maximum blood lactate concentrations after cardiac surgery. We hypothesized that models using minute-level intraoperative data as inputs would have the best predictive performance. MethodsAdults who underwent cardiac surgery with cardiopulmonary bypass were eligible. The primary outcome was maximum lactate concentration within 24 h postoperatively. We considered three classes of predictive models, using the performance metric of mean absolute error across testing folds: (1) static models using baseline preoperative variables, (2) augmentation of the static models with intraoperative statistics, and (3) a dynamic approach that integrates preoperative variables with intraoperative time series data. Results2,187 patients were included. For three models that only used baseline characteristics (linear regression, random forest, artificial neural network) to predict maximum postoperative lactate concentration, the prediction error ranged from a median of 2.52 mmol/L (IQR 2.46, 2.56) to 2.58 mmol/L (IQR 2.54, 2.60). The inclusion of intraoperative summary statistics (including intraoperative lactate concentration) improved model performance, with the prediction error ranging from a median of 2.09 mmol/L (IQR 2.04, 2.14) to 2.12 mmol/L (IQR 2.06, 2.16). For two modelling approaches (recurrent neural network, transformer) that can utilize intraoperative time-series data, the lowest prediction error was obtained with a range of median 1.96 mmol/L (IQR 1.87, 2.05) to 1.97 mmol/L (IQR 1.92, 2.05). Intraoperative lactate concentration was the most important predictive feature based on Shapley additive values. Anemia and weight were also important predictors, but there was heterogeneity in the importance of other features. ConclusionPostoperative lactate concentrations can be predicted using baseline and intraoperative data with moderate accuracy. These results reflect the value of intraoperative data in the prediction of clinically relevant outcomes to guide perioperative management.more » « less
-
Introduction:Current brain-computer interfaces (BCIs) primarily rely on visual feedback. However, visual feedback may not be sufficient for applications such as movement restoration, where somatosensory feedback plays a crucial role. For electrocorticography (ECoG)-based BCIs, somatosensory feedback can be elicited by cortical surface electro-stimulation [1]. However, simultaneous cortical stimulation and recording is challenging due to stimulation artifacts. Depending on the orientation of stimulating electrodes, their distance to the recording site, and the stimulation intensity, these artifacts may overwhelm the neural signals of interest and saturate the recording bioamplifiers, making it impossible to recover the underlying information [2]. To understand how these factors affect artifact propagation, we performed a preliminary characterization of ECoG signals during cortical stimulation.Materials/Methods/ResultsECoG electrodes were implanted in a 39-year old epilepsy patient as shown in Fig. 1. Pairs of adjacent electrodes were stimulated as a part of language cortical mapping. For each stimulating pair, a charge-balanced biphasic square pulse train of current at 50 Hz was delivered for five seconds at 2, 4, 6, 8 and 10 mA. ECoG signals were recorded at 512 Hz. The signals were then high-pass filtered (≥1.5 Hz, zero phase), and the 5-second stimulation epochs were segmented. Within each epoch, artifact-induced peaks were detected for each electrode, except the stimulating pair, where signals were clipped due to amplifier saturation. These peaks were phase-locked across electrodes and were 20 ms apart, thus matching the pulse train frequency. The response was characterized by calculating the median peak within the 5-second epochs. Fig. 1 shows a representative response of the right temporal grid (RTG), with the stimulation channel at RTG electrodes 14 and 15. It also shows a hypothetical amplifier saturation contour of an implantable, bi-directional, ECoG-based BCI prototype [2], assuming the supply voltage of 2.2 V and a gain of 66 dB. Finally, we quantify the worstcase scenario by calculating the largest distance between the saturation contour and the midpoint of each stimulating channel.Discussion:Our results indicate that artifact propagation follows a dipole potential distribution with the extent of the saturation region (the interior of the white contour) proportional to the stimulation amplitude. In general, the artifacts propagated farthest when a 10 mA current was applied with the saturation regions extending from 17 to 32 mm away from the midpoint of the dipole. Consistent with the electric dipole model, this maximum spread happened along the direction of the dipole moment. An exception occurred at stimulation channel RTG11-16, for which an additional saturation contour emerged away from the dipole contour (not shown), extending the saturation region to 41 mm. Also, the worst-case scenario was observed at 6 mA stimulation amplitude. This departure could be a sign of a nonlinear, switch-like behavior, wherein additional conduction pathways could become engaged in response to sufficiently high stimulation.Significance:While ECoG stimulation is routinely performed in the clinical setting, quantitative studies of the resulting signals are lacking. Our preliminary study demonstrates that stimulation artifacts largely obey dipole distributions, suggesting that the dipole model could be used to predict artifact propagation. Further studies are necessary to ascertain whether these results hold across other subjects and combinations of stimulation/recording grids. Once completed, these studies will reveal practical design constraints for future implantable bi-directional ECoG-based BCIs. These include parameters such as the distances between and relative orientations of the stimulating and recording electrodes, the choice of the stimulating electrodes, the optimal placement of the reference electrode, and the maximum stimulation amplitude. These findings would also have important implications for the design of custom, low-power bioamplifiers for implantable bi-directional ECoG-based BCIs.References:[1] Hiremath, S. V., et al. "Human perception of electrical stimulation on the surface of somatosensory cortex." PloS one 12.5 (2017): e0176020.[2] Rouse, A. G., et al. "A chronic generalized bi-directional brain-machine interface." Journal of Neural Engineering 8.3 (2011): 036018more » « less
-
ObjectiveThe goal of this study was to assess how different real-time gaze sharing visualization techniques affect eye tracking metrics, workload, team situation awareness (TSA), and team performance. BackgroundGaze sharing is a real-time visualization technique that allows teams to know where their team members are looking on a shared display. Gaze sharing visualization techniques are a promising means to improve collaborative performance on simple tasks; however, there needs to be validation of gaze sharing with more complex and dynamic tasks. MethodsThis study evaluated the effect of gaze sharing on eye tracking metrics, workload, team SA, and team performance in a simulated unmanned aerial vehicle (UAV) command-and-control task. Thirty-five teams of two performed UAV tasks under three conditions: one with no gaze sharing and two with gaze sharing. Gaze sharing was presented using a fixation dot (i.e., a translucent colored dot) and a fixation trail (i.e., a trail of the most recent fixations). ResultsThe results showed that the fixation trail significantly reduced saccadic activity, lowered workload, supported team SA at all levels, and improved performance compared to no gaze sharing; however, the fixation dot had the opposite effect on performance and SA. In fact, having no gaze sharing outperformed the fixation dot. Participants also preferred the fixation trail for its visibility and ability to track and monitor the history of their partner’s gaze. ConclusionThe results showed that gaze sharing has the potential to support collaboration, but its effectiveness depends highly on the design and context of use. ApplicationThe findings suggest that gaze sharing visualization techniques, like the fixation trail, have the potential to improve teamwork in complex UAV tasks and could have broader applicability in a variety of collaborative settings.more » « less
-
Understanding urban heat exposure dynamics is critical for public health, urban management, and climate change resilience. Near real-time analysis of urban heat enables quick decision-making and timely resource allocation, thereby enhancing the well-being of urban residents, especially during heatwaves or electricity shortages. To serve this purpose, we develop a cyberGIS framework to analyze and visualize human sentiments of heat exposure dynamically based on near real-time location-based social media (LBSM) data. Large volumes and low-cost LBSM data, together with a content analysis algorithm based on natural language processing are used effectively to generate near real-time heat exposure maps from human sentiments on social media at both city and national scales with km spatial resolution and census tract spatial unit. We conducted a case study to visualize and analyze human sentiments of heat exposure in Chicago and the United States in September 2021. Enabled with high-performance computing, dynamic visualization of heat exposure is achieved with fine spatiotemporal scales while heat exposure detected from social media data can be used to understand heat exposure from a human perspective and allow timely responses to extreme heat.more » « less
