An official website of the United States government
Droplet dispersion in liquid–liquid systems is a crucial step in many unit operations throughout the chemical, food, and pharmaceutic industries, where improper operation causes billions of dollars of loss annually. A theoretical background for the description of droplet breakup has been established, but many assumptions are still unconfirmed by experimental observations. In this investigation, a von Kármán swirling flow device was used to produce homogeneous, low-intensity turbulence suitable for carrying out droplet breakage experiments using optical image analysis. Individual droplets of known, adjustable, and repeatable sizes were introduced into an isotropic turbulent flow field providing novel control over two of the most important factors impacting droplet breakage: turbulence dissipation rate and parent droplet size. Introducing droplets one at a time, large data sets were gathered using canola, safflower, and sesame oils for the droplet phase and water as the continuous phase. Automated image analysis was used to determine breakage time, breakage probability, and child droplet size distribution for various turbulence intensities. Breakage time and breakage probability were observed to increase with increasing parent droplet size, consistent with the classic and widely used Coulaloglou–Tavlarides breakage model (C–T model). The shape of the child drop size distribution function was found to depend upon the size of the parent droplet.
more »
« less
Design and operation of a von Kármán reactor for droplet breakage experiments
The dispersion of an immiscible fluid in a turbulent liquid flow is a frequent occurrence in various natural and technical processes, with particular importance in the chemical, pharmaceutical, mining, petroleum, and food industries. Understanding the dynamics and breakup of liquid droplets is crucial in many scientific and engineering applications, as poor control and optimization of droplet systems results in significant financial losses annually. Although a theoretical background for describing droplet breakup exists, many assumptions still require experimental verification. Numerous mathematical models have been proposed to describe the rate coefficient of droplet breakup and child distribution functions. However, the validation and discrimination between models have been hindered by the lack of experimental data gathered under well-controlled and well characterized conditions. Thus, to validate the current models, novel equipment and methodology for optical droplet breakage research are required. In this work, a von K´arm´an swirling flow apparatus was designed and constructed to carry out optical based droplet breakage experiments under low-intensity, homogeneous turbulent flow. The methodology presented here describes the procedure for generating and controlling the size of the droplets being injected into the homogeneous turbulent flow field. The experiments involved introducing single droplets into the test section, using peanut oil to be the droplet phase and the continuous phase is water. Automated image analysis algorithms were utilized to determine breakage time, breakage probability, and child droplet size distribution for different turbulence intensities.
more »
« less
- Award ID(s):
- 2201707
- PAR ID:
- 10488828
- Publisher / Repository:
- Elsevier
- Date Published:
- Journal Name:
- Flow Measurement and Instrumentation
- Volume:
- 95
- Issue:
- C
- ISSN:
- 0955-5986
- Page Range / eLocation ID:
- 102517
- Subject(s) / Keyword(s):
- droplet breakage turbulence experimental design von Karman reactor
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Chemical process engineering unit operations such as solvent extraction, liquid–liquid chemical reactions, and emulsion processing are all dependent on turbulent liquid–liquid droplet flow dynamics. The design and operation of equipment used in these applications is often guided by theoretical models for droplet breakup. Although several models for droplet breakage in agitated liquid emulsions have been developed, their utility is limited because they incorporate fitting factors that must be determined empirically by performing experiments using a specific fluid pairing and relevant flow configuration. The need to acquire experimental data to determine model constants is a significant drawback that hinders widespread use of breakage models to design and optimize process equipment. In this work, analytical expressions are formulated to predict the value of a fitting parameter associated with droplet breakage time for two commonly used breakage rate models without having to perform empirical studies. These equations were derived by using the underlying assumptions within each of the two breakage models considered, namely, that droplet breakage is a result of the competition between relevant deformation and restorative stresses. Data from experiments conducted in a homogeneous turbulent von Kármán box as well as from previously published investigations of droplet breakage in heterogeneous flow devices were utilized to validate the derived equations for the breakage time parameters. In general, good agreement was observed between predictions obtained using the derived equations for fitting parameters and those obtained from experiments.more » « less
-
null (Ed.)Liquid-in-air generation of monodisperse, microscale droplets is an alternative to conventional liquid-in-liquid methods. Previous work has validated the use of a highly inertial gaseous continuous phase in the production of monodisperse droplets in the dripping regime using planar, flow-focusing, PDMS microchannels. The jetting flow regime, characteristic of small droplet size and high generation rates, is studied here in novel microfluidic geometries. The region associated with the jetting regime is characterized using the liquid Weber number (Wel) and the gas Reynolds number (Reg). We explore the effects of microchannel confinement on the development and subsequent breakup of the liquid jet as well as the physical interactions between the jet and continuous gaseous flow. Droplet breakup in the jetting regime is also studied numerically and the influence of different geometrical parameters is investigated. Numerical simulations of the jetting regime include axisymmetric cases where the jet diameter and length are studied. This work represents a vital investigation into the physics of droplet breakup in the jetting regime subject to a confined gaseous co-flow. By understanding the effects that different flow and geometry conditions have on the generation of droplets, the use of this system can be optimized for specific high-demand applications in the aerospace, material, and biological industries.more » « less
-
Droplet breakup is a complex process involving interfacial instability and transport across a wide range of length and time scales. Fundamental studies of shock-droplet interaction provide valuable insight into the physical processes behind droplet breakup at high Weber and Reynolds numbers. Many high-speed applications such as liquid-fueled detonations and hypersonic hydrometeor impacts involve small droplets under high Weber numbers and/or unsteady conditions. The work presented here will explore deformation and hydrodynamics leading to breakup for small droplets (< 200μm) at high Weber numbers. An experimental campaign is presented whereby droplet deformation is measured at high temporal and spatial resolution. Small rapidly evaporating droplets (≈ 150μm) at Weber numbers in excess of 1000 are studied. High-speed (sub-microsecond image times) shadowgraphy provides measurement of the droplet deformation rate, acceleration, and breakup timing. DNS results are presented to further explore deformation rates for smaller droplets (≈ 5μm). Deformation rates are compared with existing models for both experimental and simulation cases. This ongoing work will provide additional data from which our understanding of complex droplet phenomena may be advanced and applied to physical systems.more » « less
-
null (Ed.)Evaporation and breakup of liquid droplets are common in many applications of the shock-driven multiphase instability (SDMI), such as in liquid-fuelled detonation engines, multiphase ejector pumps and turbines and explosive dispersal of liquid particles (i.e. chemical or biological agents). In this paper, the effects of evaporation and breakup of droplets on the mixing induced by the SDMI are considered through simulations and compared with experimental results. The evaporation model is validated against previous experimental data. The capabilities of the simulations and particle models are then demonstrated through a qualitative comparison with experimental results where breakup effects are negligible (i.e. small droplets). The simulation results are explored further to quantify the effects of evaporation (i.e. mixing enhancement) in the SDMI, providing further insight into the experimental results. A new breakup model, derived from previous works, is then presented for low Reynolds number (below 500), low Weber number (below 100) droplets in a shock-driven multiphase instability. The breakup model capabilities are then demonstrated through a comparison with experimental results where breakup effects are significant (larger droplet sizes). Finally, the simulation results are used to highlight the importance of breakup parameters on the evaporation rate and large-scale mixing in the SDMI. Overall, it is shown that evaporation is enhanced by the large-scale hydrodynamics instability, the SDMI, and that breakup of the droplets significantly increases the strength of the instability, and rate of droplet evaporation.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1016/j.flowmeasinst.2023.102517
