skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: A community-led calibration of the Zr isotope reference materials: NIST candidate RM 8299 and SRM 3169
As the field of zirconium (Zr) stable isotopes is rapidly expanding from the study of mass-independent to that of mass-dependent isotope effects, a variety of Zr standards have appeared in the literature. While several of these standards have been proposed as the ideal isotope reference material (iRM) against which all data should be reported, none of them have been shown to meet the compositional and/or conflict-of-interest-free distribution requirements put forth by the community. To remedy this situation, we report on a community-led effort to develop and calibrate a scale defining iRM for Zr isotopes: NIST RM 8299. Developed in partnership with the National Institute of Standards and Technology (NIST) from the widely used SRM 3169 Zirconium Standard Solution (certified for mass fraction), the candidate RM 8299 was calibrated through an inter-laboratory study involving three laboratories. Our data show that candidate RM 8299 meets all requirements of an ideal iRM. It is an isotopically homogeneous, high-purity reference material, that is free of isotope anomalies, and whose composition is identical to that of a major geological reservoir (Ocean Island Basalts). Furthermore, RM 8299 will be curated and distributed by NIST, a neutral, conflict-of-interest free organization, and was produced in sufficient quantities to last multiple decades. We recommend that all Zr isotope data be reported against RM 8299. Our results also show that SRM 3169 lots #130920 and #071226 have indistinguishable composition compared to candidate RM 8299. Therefore, using RM 8299 as the scale defining iRM will enable direct comparison of all future data with the vast majority of the existing literature data, both for mass-independent and mass-dependent isotope effects. To facilitate conversion of δ94/90Zr values reported against other Zr standards, we provide high-precision conversion factors to the RM 8299 scale obtained using the double-spike method.  more » « less
Award ID(s):
2143168
PAR ID:
10490364
Author(s) / Creator(s):
; ; ; ; ; ; ; ;
Publisher / Repository:
Journal of Analytical Atomic Spectrometry
Date Published:
Journal Name:
Journal of Analytical Atomic Spectrometry
Volume:
38
Issue:
10
ISSN:
0267-9477
Page Range / eLocation ID:
2087 to 2104
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; (, Journal of Analytical Atomic Spectrometry)
    Zirconium (Zr) plays a key role in the development of phases like zircon (ZrSiO 4 ) and baddeleyite (ZrO 2 ) in magmatic systems. These minerals are crucial for the study of geologic time and crustal evolution, and their high resistivity to weathering and erosion results in their preservation on timescales of billions of years. Although zircon and baddeleyite may also preserve a robust record of Zr isotope behavior in high-temperature terrestrial environments, little is known about the factors that control Zr isotope partitioning in magmatic systems, the petrogenetic significance of fractionated compositions, or how these variations are recorded in Zr-rich accessory phases. Here, we describe a new analytical protocol for accurately determining the Zr stable isotope composition of zircon by multicollector-inductively coupled plasma-mass spectrometry (MC-ICP-MS), using the double-spike method to correct for procedural and instrumental mass bias. We apply this technique to test whether zircon crystallization in carbonatite magmatic systems is a driver of Zr isotope fractionation by interrogating the internal zonation of a zircon megacryst from the Mud Tank carbonatite (MTUR1). We find the MTUR1 megacryst to lack internal zoning within analytical uncertainties with a mean μ 94/90 Zr NIST = −55 ± 28 ppm (2 SD, n = 151), which suggests that zircon crystallization is not a driver of Zr isotope fractionation in carbonatite magmas. This observation is in stark contrast with those made in silicate magmatic systems, raising the possibility that the bonding environment of Zr 4+ ions may be fundamentally different in carbonatite vs. silicate melts. Because of its remarkable homogeneity, the MTUR1 megacryst is an ideal natural reference material for Zr isotopic analysis of zircon using both solution and spatially resolved methods. The reproducibility of a pure Zr solution and our chemically purified zircon fractions indicate that the external reproducibility of our method is on the order of ±28 ppm for μ 94/90 Zr, or ±7 ppm per amu, at 95% confidence. 
    more » « less
  2. ; (, Science Advances)
    Zirconium is a commonly used elemental tracer of silicate differentiation, yet its stable isotope systematics remain poorly known. Accessory phases rich in Zr 4+ such as zircon and baddeleyite may preserve a unique record of Zr isotope behavior in magmatic environments, acting both as potential drivers of isotopic fractionation and recorders of melt compositional evolution. To test this potential, we measured the stable Zr isotope composition of 70 single zircon and baddeleyite crystals from a well-characterized gabbroic igneous cumulate. We show that (i) closed-system magmatic crystallization can fractionate Zr stable isotopes at the >0.5% level, and (ii) zircon and baddeleyite are isotopically heavy relative to the melt from which they crystallize, thus driving chemically differentiated liquids toward isotopically light compositions. Because these effects are contrary to first-order expectations based on mineral-melt bonding environment differences, Zr stable isotope fractionation during zircon crystallization may not solely be a result of closed-system thermodynamic equilibrium. 
    more » « less
  3. ; ; ; ; (, Geostandards and geoanalytical research)
    Secondary ion mass spectrometry techniques are used to study trace elements in organic samples where matrix compositions vary spatially. This study was conducted to develop calibrations for lithium content and lithium isotope measurements in kerogen. Known concentrations of Li ions (6Li and 7Li) were implanted into organic polymers, with a range of H/C and O/C ratios similar to kerogen, along with glassy carbon (SPI Glas‐22) and silicate glass (NIST SRM 612). Results show that Li content calibration factors (K*) are similar for carbonaceous samples when analysed using a 5kV secondary ion accelerating voltage. Using a 9 kV secondary ion accelerating voltage, K* factors are negatively correlated with the sample O content, changing ~ 30% between 0 and 15 oxygen atomic %. Thus, to avoid the matrix effect related to O content, using a 5 kV secondary ion accelerating voltage is best for quantification of Li contents based on 7Li+/12C+ ratios. Under these analytical conditions, Li ppm (atomic) = (132 (  8) × 7Li+/12C+) × 12C atom fraction of the sample measured. Lithium isotope ratio measurements of SPI Glas‐22 and NIST SRM 612 are within uncertainty; however, the organic polymer samples as a group show a 10‰ higher δ7Li than NIST SRM 612. 
    more » « less
  4. ; ; ; ; (, Geostandards and Geoanalytical Research)
    Secondary ion mass spectrometry techniques are used to study trace elements in organic samples where matrix compositions vary spatially. This study was conducted to develop calibrations for lithium content and lithium isotope measurements in kerogen. Known concentrations of Li ions (6Li and7Li) were implanted into organic polymers, with a range of H/C and O/C ratios similar to kerogen, along with glassy carbon (SPI Glas‐22) and silicate glass (NIST SRM 612). Results show that Li content calibration factors (K*) are similar for carbonaceous samples when analysed using a 5 kV secondary ion accelerating voltage. Using a 9 kV secondary ion accelerating voltage,K* factors are negatively correlated with the sample O content, changing ~ 30% between 0 and 15 oxygen atomic %. Thus, to avoid the matrix effect related to O content, using a 5 kV secondary ion accelerating voltage is best for quantification of Li contents based on7Li+/12C+ratios. Under these analytical conditions, Li ppm (atomic) = (132 (± 8) × 7Li+/12C+) × 12C atom fraction of the sample measured. Lithium isotope ratio measurements of SPI Glas‐22 and NIST SRM 612 are within uncertainty; however, the organic polymer samples as a group show a 10‰ higher δ7Li than NIST SRM 612. 
    more » « less
  5. ; ; ; ; ; ; (, Geochimica et Cosmochimica Acta)
    Zirconium (Zr) stable isotopes recently emerged as potential tracers of magmatic processes and, as a result, their behavior in high-temperature environments have been the focus of extensive characterization. In contrast, few studies have focused on Zr behavior and isotopic fractionation in low temperature or aqueous environments. Here, we describe a new analytical routine for highly precise and accurate analysis of Zr isotopes of water samples, using a combination of double-spike and iron co-precipitation methods. To assess the impact of potential systematic biases a series of experiments were conducted on natural and synthetic water samples. Our results show that the spike-to-sample ratio, matrix composition, and high field-strength element (HFSE) concentration have negligible effects on measured seawater Zr isotopic compositions, and that the Fe co-precipitation method used yields accurate and precise Zr isotope data. We thus apply this method to natural seawater samples collected from a water column profile in the Pacific Ocean off the coast of California, with depths ranging from 5 to 711 m. We find that the natural seawater samples are highly fractionated relative to solid-Earth values and display marked variability in δ94/90Zr as a function of depth, ranging from ∼ +0.650 ‰ near the surface, to + 1.530 ‰ near the profile bottom, with an analytical uncertainty of ± ∼0.045 ‰ (2 SE, external reproducibility). The δ94/90Zr value of seawater is much higher than that of Earth’s mantle and continental crust, which has a δ94/90Zr value near zero, indicating the presence of processes in the hydrosphere capable of inducing large mass-dependent fractionation. Furthermore, the seawater δ94/90Zr value exhibits systematic variations with respect to water depth and salinity, suggesting that Zr isotopic compositions may be sensitive to seawater chemical properties and source highlighting its potential utility as a tracer of biogeochemical processes within the ocean. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email