An official website of the United States government
Plastic is ubiquitous across all aspects of modern life. Despite its usefulness, only 9% of all plastic waste ever produced has been recycled, leaving a tremendous amount that ends up in landfills and the environment. New strategies need to investigate using this waste plastic. This report analyzes upcycling waste plastics into membranes for water and gas separations. Polyethylene terephthalate, polystyrene, poly(vinyl chloride), polyethylene, polypropylene, and tire rubber have been studied for use as membranes. Future work needs to investigate greener solvents, health and safety aspects, costs, supply and demand, and life cycle assessments for upcycling plastic waste into membranes.
more »
« less
Chlorinated Plastics Offer Unique Opportunities and Challenges in Upcycling
Abstract Chlorinated plastics are part of the everyday lives of consumers and producers alike. They can be found in buildings, automobiles, fashion, packaging, and many other places. This prevalence makes them a considerable part of the plastic waste crisis. Interest in “upcycling” (as opposed to recycling) has grown recently to augment the possibilities of managing plastic waste. The advances made in plastic upcycling have focused on polyethylene (PE), polypropylene (PP), polyethylene terephthalate (PET) and polystyrene (PS) while chlorinated plastics, chiefly polyvinyl chloride (PVC), have received much less attention. The release of chlorine‐containing molecules during treatment of chlorinated plastic greatly complicates cross‐method upcycling, or even the treatment of plastic mixes containing chlorinated plastics. This review presents a case for extracting value from chlorinated plastics by highlighting appealing upcycling products made owing to, or despite, the C‐Cl bond via depolymerization, carbonization and modification. This article is protected by copyright. All rights reserved.
more »
« less
- Award ID(s):
- 2132133
- PAR ID:
- 10491530
- Publisher / Repository:
- Wiley
- Date Published:
- Journal Name:
- Polymer International
- ISSN:
- 0959-8103
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Researchers have made headway against challenges of increasing cement infrastructure and low plastic recycling rates by using waste plastic in cementitious materials. Past studies indicate that microbially induced calcium carbonate precipitation (MICP) to coat plastic in calcium carbonate may improve the strength. The objective of this study was to increase the amount of clean and contaminated waste plastic that can be added to mortar and to assess whether MICP treatment enhances the strength. The performance of plastic-filled mortar was investigated at 5%, 10%, and 20% volume replacement for cement. Untreated, clean plastics at a 20% cement replacement produced compressive strengths acceptable for several applications. However, a coating of MICP on clean waste plastic did not improve the strengths. At 10% replacement, both MICP treatment and washing of contaminated plastics recovered compressive strengths by approximately 28%, relative to mortar containing oil-coated plastics. By incorporating greater volumes of waste plastics into mortar, the sustainability of cementitious composites has the potential of being improved by the dual mechanisms of reduced cement production and repurposing plastic waste.more » « less
-
With the ever-increasing demand for plastics, sustainable recycling methods are key necessities. The current plastics industry can manage to recycle only 10% of the 400 million metric tons of plastic produced globally. Waste plastics, in the current infrastructure, land up mostly in landfills. Although a lot of research efforts have been spent on processing and recycling co-mingled mixed plastics, energy-efficient sustainable and scalable routes for plastic upcycling are still lacking. Catalytic valorization of waste plastic feedstock is one of the potential scalable routes for plastic upcycling. Silica-alumina based materials, and zeolites have shown a lot of promise. A major interest lies in restricting catalyst deactivation, and refining product selectivity and yield for such catalytic processes. This article highlights ChemPren technology as a clean energy solution to waste plastic recycling. Co-mingled, mixed plastic feedstock along with spray dried, attrition resistant, ZSM-5 containing catalysts is preprocessed with an extruder to form optimally sized particles and fed into a fluidized bed reactor for short contact times to produce selectively and in high yields ethylenes, propylenes and butylenes. This techno-economic perspective indicates that the ChemPren technology can produce propylene at $0.16 per lb, whereas the current selling price of virgin propylene is $0.54 per lb. This technology can serve as a platform for mixed plastic upcycling, with more advancements necessary in the form of robust and resilient catalysts and reactor operation strategies for tuning product selectivity.more » « less
-
The global utilization of single-use, non-biodegradable plastics, such as bottles made of polyethylene terephthalate (PET), has contributed to catastrophic levels of plastic pollution. Fortu- nately, microbial communities are adapting to assimilate plastic waste. Previously, our work showed a full consortium of five bacteria capable of synergistically degrading PET. Using omics approaches, we identified the key genes implicated in PET degradation within the consortium’s pangenome and transcriptome. This analysis led to the discovery of a novel PETase, EstB, which has been observed to hydrolyze the oligomer BHET and the polymer PET. Besides the genes implicated in PET degradation, many other biodegradation genes were discovered. Over 200 plastic and plasticizer degradation-related genes were discovered through the Plastic Microbial Biodegradation Database (PMBD). Diverse carbon source utilization was observed by a microbial community-based assay, which, paired with an abundant number of plastic- and plasticizer-degrading enzymes, indicates a promising possibility for mixed plastic degradation. Using RNAseq differential analysis, several genes were predicted to be involved in PET degradation, including aldehyde dehydrogenases and several classes of hydrolases. Active transcription of PET monomer metabolism was also observed, including the generation of polyhydroxyalkanoate (PHA)/polyhydroxybutyrate (PHB) biopolymers. These results present an exciting opportunity for the bio-recycling of mixed plastic waste with upcycling potential.more » « less
-
While tremendous progress has been made in the dynamic crosslinking of polypropylene (PP) for plastics upcycling, their efficacy in addressing low molecular weight (MW) PP waste remains untapped. In this work, we demonstrate a simple and scalable method to convert brittle low MW PP to vitrimer materials with enhanced thermal and mechanical properties, enabling their use in circular upcycling. Different from most previous work employing small molecule crosslinkers, we prepare PP vitrimers (PPv) using polymeric crosslinkers, containing polyethylene glycol segments (PEG), which lead to altered crystalline structures and network formation. Importantly, by increasing the MW of crosslinkers from 200 Da to 1000 Da, the PPv exhibit more than 50 times increase in their fracture energy with strong ductility, which can be attributed to combined effects of strengthened amorphous regions of semi-crystalline PP domains and the phase separation between soft PEG segments and PP matrix. Moreover, when blending the PPv with high MW PP (PPh), the PPh/PPv blends show comparable elastic modulus, yield strength, and stretchability to the PPh, in sharp contrast to the widely-known embrittlement of low MW PP/PPh blends. These results demonstrate the use of polymeric dynamic crosslinkers as an important strategy for upcycling low MW PP waste to value-added products.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1002/pi.6621
