The ability to manufacture ordered mesoporous materials using low-cost precursors and scalable processes is essential for unlocking their enormous potential to enable advancement in nanotechnology. While templating-based methods play a central role in the development of mesoporous materials, several limitations exist in conventional system design, including cost, volatile solvent consumption, and attainable pore sizes from commercial templating agents. This work pioneers a new manufacturing platform for producing ordered mesoporous materials through direct pyrolysis of crosslinked thermoplastic elastomer-based block copolymers. Specifically, olefinic majority phases are selectively crosslinked through sulfonation reactions and subsequently converted to carbon, while the minority block can be decomposed to form ordered mesopores. We demonstrate that this process can be extended to different polymer precursors for synthesizing mesoporous polymer, carbon, and silica. Furthermore, the obtained carbons possess large mesopores, sulfur-doped carbon framework, with tailorable pore textures upon varying the precursor identities.
Precursor design for efficient synthesis of large-pore, sulfur-doped ordered mesoporous carbon through direct pyrolysis
The production of ordered mesoporous carbons (OMCs) can be achieved by direct pyrolysis of self-assembled polymers. Typically, these systems require a majority phase capable of producing carbon, and a minority phase to form pores through a thermal decomposition step. While polyacrylonitrile (PAN)-based block copolymers (BCPs) have been broadly reported as OMC precursors, these materials have a relatively narrow processing window for developing ordered nanostructures and often require sophisticated chemistry for BCP synthesis, followed by long crosslinking times at high temperatures. Alternatively, olefinic thermoplastic elastomers (TPEs) can be convered to large-pore OMCs after two steps of sulfonation-induced crosslinking and carbonization. Building on this platform, this work focuses on the precursor design concept for the efficient synthesis of OMCs through employing low-cost and widely available polystyrene-block-polybutadiene-block-polystyrene (SBS), which contains unsaturated bonds along the polymer backbone. As a result, the presence of alkene groups greatly enhances the kinetics of sulfonation-induced crosslinking reaction, which can be completed within only 20 min at 150 °C, nearly an order of magnitude faster than a recently reported TPE system containing a fully saturated polymer backbone. The crosslinking reaction enables the production of OMCs with pore sizes (∼9.5 nm) larger than most conventional soft-templating systems, while also doping sulfur heteroatoms into the carbon framework of the final products. This work demonstrates efficient synthesis of OMCs from TPE precursors which have a great potential for scaled production, and the resulting products may have broad applications such as for drug delivery and energy storage.
more »
« less
- Award ID(s):
- 2239408
- NSF-PAR ID:
- 10491929
- Publisher / Repository:
- RSC
- Date Published:
- Journal Name:
- Molecular Systems Design & Engineering
- Volume:
- 8
- Issue:
- 9
- ISSN:
- 2058-9689
- Page Range / eLocation ID:
- 1156 to 1164
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract -
The ability to change polymer properties has in the past largely been a factor of modulating the molecular weight, molecular weight distribution breadth, crosslinking, or branching. The use of controlled MWD shape has recently emerged as a promising avenue towards modifying polymer properties. Taking advantage of molecular weight distribution shape, we report a simple and efficient approach for tuning material properties in polystyrene- block -polyisoprene- block -polystyrene (SIS) thermoplastic elastomers (TPEs). We find that the skew of the MWD function governs tensile properties and can be used as a handle to predictably vary polymer toughness while reducing energy dissipation.more » « less
-
Porous nanoscale carbonaceous materials are widely employed for catalysis, separations, and electrochemical devices where device performance often relies upon specific and well-defined regular feature sizes. The use of block polymers as templates has enabled affordable and scalable production of diverse porous carbons. However, popular carbon preparations use equilibrating micelles which can change dimensions in response to the processing environment. Thus, polymer methods have not yet demonstrated carbon nanomaterials with constant average template diameter and tailored wall thickness. In contrast, persistent micelle templates (PMTs) use kinetic control to preserve constant micelle template diameters, and thus PMT has enabled constant pore diameter metrics. With PMT, the wall thickness is independently adjustable via the amount of material precursor added to the micelle templates. Previous PMT demonstrations relied upon thermodynamic barriers to inhibit chain exchange while in solution, followed by rapid evaporation and cross-linking of material precursors to mitigate micelle reorganization once the solvent evaporated. It is shown here that this approach, however, fails to deliver kinetic micelle control when used with slowly cross-linking material precursors such as those for porous carbons. A new modality for kinetic control over micelle templates, glassy-PMTs, is shown using an immobilized glassy micelle core composed of polystyrene (PS). Although PS based polymers have been used to template carbon materials before, all prior reports included plasticizers that prevented kinetic micelle control. Here the key synthetic conditions for carbon materials with glassy-PMT control are enumerated, including dependencies upon polymer block selection, block molecular mass, solvent selection, and micelle processing timeline. The use of glassy-PMTs also enables the direct observation of micelle cores by TEM which are shown to be commensurate with template dimensions. Glassy-PMTs are thus robust and insensitive to material processing kinetics, broadly enabling tailored nanomaterials with diverse chemistries.more » « less
-
Polymer templates play an essential role in the robust infiltration-based synthesis of functional multicomponent heterostructures with controlled structure, porosity, and composition. Such heterostructures are be used as hybrid organic–inorganic composites or as all-inorganic systems once the polymer templates are removed. Using iron oxide/alumina heterostructures formed by two-step infiltration of polystyrene-block-polyvinyl pyridine block copolymer with iron and aluminum precursors from the solution and vapor-phases, respectively, we show that the phase and morphology of iron oxide nanoparticles dramatically depend on the approach used to remove the polymer. We demonstrate that thermal and plasma oxidative treatments result in iron oxide nanoparticles with either solid or hollow morphologies, respectively, that lead to different magnetic properties of the resulting materials. Our study extends the boundaries of structure manipulations in multicomponent heterostructures synthesized using polymer infiltration synthesis, and hence their properties.more » « less
-
more » « less
Abstract Aqueous self‐assembly of amphiphilic block copolymers form diverse nanostructured morphologies depending on block volume fraction and solvophilicity. Stimuli‐responsive motifs have been combined with self‐assembled micelles to afford spatiotemporal, on‐demand encapsulation and payload release. However, the role of modular polymer architecture (i.e., bottlebrushes) in stimuli‐responsive aqueous self‐assembly is not fully understood. The synthesis, aqueous self‐assembly, and photoirradiation of photolabile, amphiphilic bottlebrush block copolymers is presented herein. Specifically, the efficient photoscission of
o ‐nitrobenzene motifs at the junction of a poly(norborneneo ‐nitrobenzene polystyrene)‐block ‐poly(norbornene polyethylene glycol) diblock bottlebrush side chain and backbone cleaved away hydrophobic polystyrene side chains and artificially increased the volume fraction of poly(ethylene glycol) (f PEG). In doing so, self‐assembled micelles readily degrade to micelle‐to‐micelle and micelle‐to‐aggregate structures after photoirradiation. Finally, this bottlebrush micelle system is used to demonstrate the efficient encapsulation and stimuli‐responsive release of Nile Red that is monitored by fluorescence spectroscopy and dynamic light scattering. The contribution of this work expands the utility of amphiphilic bottlebrush systems as highly efficient and responsive, hierarchically assembled nanomaterials.
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1039/D3ME00043E
