An official website of the United States government
Abstract Three drivers of subsidence are recognized in the Western Interior Basin: Mesozoic–early Cenozoic flexure adjacent to the thin‐skinned, eastward propagating Sevier Orogeny, Late Cretaceous–Eocene flexure associated with thick‐skinned Laramide Uplifts and Late Cretaceous dynamic subsidence. This study combines outcrop lithofacies, palaeocurrent measurements, detrital zircon geochronology, biostratigraphy, stratigraphic correlations and isopach maps of Coniacian–Maastrichtian (89–66 Ma) units to identify these subsidence mechanisms impact on basin geometry and stratigraphic architecture in the northern Utah to southwestern Wyoming segment of the North American Cordillera. Detrital zircon maximum depositional ages and biostratigraphy support that the Maastrichtian Hams Fork Conglomerate was deposited above the Moxa unconformity in the wedgetop and foredeep depozones. The Moxa unconformity underlies the progradational Ericson Formation in the distal foredeep. The Hams Fork, however, is younger than the Ericson Formation, and instead equivalent to upper Almond Formation. Therefore, the hiatus associated with the Moxa unconformity continued for several million years longer in the fold belt and proximal basin than in the distal foredeep, with Ericson Formation‐equivalent strata onlapping the Moxa unconformity towards the west. Regional thickness patterns record and constrain the timing of the transition from Sevier to Laramide‐style tectonic regimes. From 88 to 83 Ma (upper Baxter Formation) a westward‐thickening stratigraphic wedge characterized the foredeep developed by lithospheric flexure by thrust‐belt loading. Nevertheless, the presence of >500 m of subsidence >200 km from the thrust front suggests a long‐wavelength subsidence mechanism consistent with dynamic subsidence. By 83 Ma (Blair Formation) the long‐wavelength depocentre shifted away from the thrust belt, with no evidence of a Sevier foredeep. This depocentre continued migrating eastward during the early‐mid Campanian (ca. 81–77 Ma). The late Campanian–Maastrichtian (ca. 74–66 Ma) is marked by narrow sedimentary wedges adjacent to the Wind River, Granite and Uinta Mountain uplifts and attributed to flexural loading by Laramide deformation.
more »
« less
The Manantiales Basin, Southern Central Andes (∼32°S), Preserves a Record of Late Eocene–Miocene Episodic Growth of an East‐Vergent Orogenic Wedge
Abstract The Manantiales basin contains >4 km of nonmarine sedimentary strata that accumulated at 31.75–32.5°S during construction of the High Andes. We report field and analytical data from the underexplored northern portion of this basin. The basin contains upper Eocene–middle Miocene strata that accumulated in back‐bulge or distal foredeep through inner‐wedge‐top depozones of the Andean foreland basin as it migrated through this region. A revised accumulation history for the basin‐filling Río de los Patos and Chinches Formations supports a regional pattern of flexure in front of an east‐vergent orogenic wedge. The former formation consists of eolian and localized fluviolacustrine deposits which accumulated between ca. 38 Ma and ≤34 Ma during thrust belt development in Chile. A subsequent ≤12 Myr hiatus may reflect passage of the flexural forebulge or cessation of subsidence during orogenic quiescence. The overlying Chinches Formation records a transition from the foredeep to wedge‐top depozones. Foredeep deposits of east‐flowing, meandering streams were incised prior to ca. 18 Ma, after which deposits of axial rivers, playas, and perennial lakes ponded in a depression behind orogenic topography to the east. After ca. 15 Ma, alluvial‐fan deposits were syndepositionally deformed adjacent to growing thrust‐belt structures along the western basin margin. Although the basin record supports a westward step in the locus of deformation during Early–Middle Miocene time, it conflicts with models involving west‐vergence of the orogenic wedge. Rather, this pattern can be explained as out‐of‐sequence deformation alternating with wedge forward propagation, consistent with Coulomb wedge models incorporating syntectonic sedimentation.
more »
« less
- Award ID(s):
- 2020935
- PAR ID:
- 10493505
- Publisher / Repository:
- DOI PREFIX: 10.1029
- Date Published:
- Journal Name:
- Tectonics
- Volume:
- 43
- Issue:
- 3
- ISSN:
- 0278-7407
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
The south-central Chile and Argentina margin experienced a regional phase of extensional tectonics during the Oligocene–early Miocene, forming several basins across the forearc, Andean Cordillera, and retroarc regions. These basins accumulated thick successions of volcanic and sedimentary rocks. Subsequently, Neogene contractional tectonics led to the development of the current Andean Cordillera and the deposition of synorogenic clastic deposits in foreland basins. Traditionally, the Cura Mallín Formation, comprising a lower volcanic unit (CMV) and an upper sedimentary unit (CMS), has been interpreted to have formed during the Oligocene–early Miocene extensional phase. However, some studies propose deposition of the CMS in a foreland basin during the early–late Miocene. To unravel the transition from extensional to contractional tectonics in the Andes of south-central Chile and Argentina, we conducted new geochronological analyses (U-Pb, LA-ICP-MS) and integrated these results with structural, stratigraphic, and sedimentological observations in key sections within the CMS and the overlying Trapa-Trapa Formation in the Principal Cordillera along the Chile-Argentina border (37°–38°S). Our findings indicate that only the lower part of the CMS was deposited in an extensional setting, as evidenced by the presence of an inverted extensional wedge dated at ∼20 Ma. The middle-upper CMS (∼19 to 9 Ma) and contemporaneous units to the east exhibit evidence of syncontractional deformation, suggesting deposition in a foreland basin generated by shortening of the western Principal Cordillera. Around 9 Ma, uplift of the Agrio and Chos Malal fold and thrust belts, east of the Principal Cordillera, led to segmentation of the foreland basin. The Trapa Trapa Formation was deposited in a hinterland basin, with sediment sourced from the east. After ∼6.5 Ma, major contractional deformation shifted westward, resulting in intense folding of the CMS and Trapa Trapa Formation and subsequent thrusting of the western Principal Cordillera over the Central Depression. Our study suggests that deformation progressed toward the eastern foreland during the early to late Miocene and then shifted toward the western forearc during the late Miocene to Pleistocene.more » « less
-
Abstract The timing of deformation and deposition within syntectonic basins provides critical information for understanding the evolution of strain in mountain belts. In the U.S. Cordillera, contractional deformation was partitioned between the Sevier thrust belt in Utah and several structural provinces in the hinterland in Nevada. One hinterland province, the Central Nevada thrust belt (CNTB), accommodated up to ∼15 km of shortening; however, in most places, this deformation can only be bracketed between Permian and Eocene. Cretaceous deposits of the Newark Canyon Formation (NCF), which are sparsely exposed along the length of the CNTB, offer the opportunity to constrain deformation timing. Here, we present mapping and U-Pb zircon geochronology from the NCF in the Diamond Mountains, which demonstrate deposition of the NCF during proximal CNTB deformation. Deposition of the basal NCF member was under way no earlier than ca. 114 Ma, a tuff in the middle part of the section was deposited at ca. 103 Ma, and the youngest member was deposited no earlier than ca. 99 Ma. Intraformational angular unconformities and abrupt along- and across-strike thickness changes indicate that NCF deposition was related to growth of an east-vergent fault-propagation fold. Clast compositions define unroofing of upper Paleozoic sedimentary rocks, which we interpret as the progressive erosion of an anticline ∼10 km to the west. CNTB deformation was contemporaneous with shortening in the Sevier thrust belt, which defines middle Cretaceous strain partitioning between frontal and interior components of the Cordillera. Strain partitioning may have been promoted by renewed underthrusting during a period of high-flux magmatism.more » « less
-
Cenozoic deformation in the eastern domain of the North Qaidam thrust belt, northern Tibetan PlateauThe present topography of the northern Tibetan Plateau is characterized by the northwest-trending Eastern Kunlun Range, Qaidam Basin, and Qilian Shan, which figure importantly into the evolution and mechanism of Tibetan plateau development during Cenozoic Indo-Asian convergence. Understanding the Cenozoic deformation history and the source-to-sink relationship through time has significant implications for deciphering the growth history of the northern Tibetan Plateau. Despite decades of study, the timing, pattern, and mechanisms of deformation across the northern Tibetan Plateau are still vigorously debated. The North Qaidam thrust belt, located between the Qaidam Basin and Qilian Shan thrust belt, provides a valuable record of Cenozoic deformation in the northern Tibetan Plateau. Here, we present the results of new geologic mapping, structural and sedimentology analysis, and apatite fission track thermochronology to constrain the Cenozoic evolution history and reconstruct the paleogeomorphology of the eastern domain of the North Qaidam thrust belt and its foreland, the Wulan Basin. Our analyses reveal the North Qaidam thrust belt experienced multi-phase exhumation since the Cretaceous. A period of Eocene localized thrust-related uplift of the North Qaidam thrust belt initiated shortly after India-Asia collision, and lower erosion rates in the Oligocene allowed the thrust belt to expand along-strike eastward. Local uplift shed sediments to the southwest, directly into the Qaidam Basin. Reactivation of the proximal thrust faults and initiation of the northwest-striking right-slip Elashan fault at ca. 15−10 Ma drove the final accelerated mid-Miocene cooling and denudation to the surface. This phase of deformation established the overall framework morphology of the northeastern margin of the Tibetan Plateau, including the overall structure of the basins and ranges.more » « less
-
Abstract Lithospheric foundering is an important mechanism of crustal deformation and recycling, basin subsidence, and surface uplift in orogenic systems. The Arizaro Basin, in the Puna region of NW Argentina, is a place where foundering was proposed to have taken place during the late Miocene. The Arizaro Basin has been described as a “bobber” basin produced by Miocene lithospheric foundering. The geometry, sedimentology, deformation, and paleoelevation history of the Arizaro Basin and surrounding arc suggest dynamic processes associated with lithospheric removal. Although analogue and numerical models support this hypothesis, the history of crustal thickness in response to lithospheric removal remains unconstrained. Here, we used a novel approach exploiting the geochemistry of detrital zircons from volcanic ashes intercalated within the Arizaro Basin stratigraphy to reconstruct the paleocrustal thickness of the neighboring magmatic sources throughout the Cenozoic. Our data indicate that the sources of volcanism for the Arizaro Basin were characterized by relatively thick crust (~53 km) since ca. 36 Ma. Thickening between ca. 20 and 13 Ma and thinning after ca. 13 Ma are consistent with formation and subsequent removal of a crustal root under the nearby arc and Aguas Calientes caldera.more » « less
