A major challenge in tissue engineering is the formation of vasculature in tissue and organs. Recent studies have shown that positively charged microspheres promote vascularization, while also supporting the controlled release of bioactive molecules. This study investigated the development of gelatin-coated pectin microspheres for incorporation into a novel bioink. Electrospray was used to produce the microspheres. The process was optimized using Design-Expert® software. Microspheres underwent gelatin coating and EDC catalysis modifications. The results showed that the concentration of pectin solution impacted roundness and uniformity primarily, while flow rate affected size most significantly. The optimal gelatin concentration for microsphere coating was determined to be 0.75%, and gelatin coating led to a positively charged surface. When incorporated into bioink, the microspheres did not significantly alter viscosity, and they distributed evenly in bioink. These microspheres show great promise for incorporation into bioink for tissue engineering applications.
more »
« less
This content will become publicly available on September 1, 2024
Design of Pectin-Based Hydrogel Microspheres for Targeted Pulmonary Delivery
Pulmonary drug delivery via microspheres has gained growing interest as a noninvasive method for therapy. However, drug delivery through the lungs via inhalation faces great challenges due to the natural defense mechanisms of the respiratory tract, such as the removal or deactivation of drugs. This study aims to develop a natural polymer-based microsphere system with a diameter of around 3 μm for encapsulating pulmonary drugs and facilitating their delivery to the deep lungs. Pectin was chosen as the foundational material due to its biocompatibility and degradability in physiological environments. Electrospray was used to produce the pectin-based hydrogel microspheres, and Design-Expert software was used to optimize the production process for microsphere size and uniformity. The optimized conditions were determined to be as follows: pectin/PEO ratio of 3:1, voltage of 14.4 kV, distance of 18.2 cm, and flow rate of 0.95 mL/h. The stability and responsiveness of the pectin-based hydrogel microspheres can be altered through coatings such as gelatin. Furthermore, the potential of the microspheres for pulmonary drug delivery (i.e., their responsiveness to the deep lung environment) was investigated. Successfully coated microspheres with 0.75% gelatin in 0.3 M mannitol exhibited improved stability while retaining high responsiveness in the simulated lung fluid (Gamble’s solution). A gelatin-coated pectin-based microsphere system was developed, which could potentially be used for targeted drug delivery to reach the deep lungs and rapid release of the drug.
more » « less- Award ID(s):
- 2045738
- NSF-PAR ID:
- 10494461
- Publisher / Repository:
- Gels
- Date Published:
- Journal Name:
- Gels
- Volume:
- 9
- Issue:
- 9
- ISSN:
- 2310-2861
- Page Range / eLocation ID:
- 707
- Subject(s) / Keyword(s):
- ["pectin","gelatin","hydrogel","microspheres","electrospray","drug delivery","pulmonary drug delivery","targeted drug delivery"]
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
more » « less
Abstract This study establishes a novel microfluidic platform for rapid encapsulation of cells at high densities in photocrosslinkable microspherical hydrogels including poly(ethylene glycol)‐diacrylate, poly(ethylene glycol)‐fibrinogen, and gelatin methacrylate. Cell‐laden hydrogel microspheres are advantageous for many applications from drug screening to regenerative medicine. Employing microfluidic systems is considered the most efficient method for scale‐up production of uniform microspheres. However, existing platforms have been constrained by traditional microfabrication techniques for device fabrication, restricting microsphere diameter to below 200 µm and making iterative design changes time‐consuming and costly. Using a new molding technique, the microfluidic device employs a modified T‐junction design with readily adjustable channel sizes, enabling production of highly uniform microspheres with cell densities (10–60 million cells mL−1) and a wide range of diameters (300–1100 µm), which are critical for realizing downstream applications, through rapid photocrosslinking (≈1 s per microsphere). Multiple cell types are encapsulated at rates of up to 1 million cells per min, are evenly distributed throughout the microspheres, and maintain high viability and appropriate cellular activities in long‐term culture. This microfluidic encapsulation platform is a valuable and readily adoptable tool for numerous applications, including supporting injectable cell therapy, bioreactor‐based cell expansion and differentiation, and high throughput tissue sphere‐based drug testing assays.
-
Abstract There is a need for new in vitro systems that enable pharmaceutical companies to collect more physiologically-relevant information on drug response in a low-cost and high-throughput manner. For this purpose, three-dimensional (3D) spheroidal models have been established as more effective than two-dimensional models. Current commercial techniques, however, rely heavily on self-aggregation of dissociated cells and are unable to replicate key features of the native tumor microenvironment, particularly due to a lack of control over extracellular matrix components and heterogeneity in shape, size, and aggregate forming tendencies. In this study, we overcome these challenges by coupling tissue engineering toolsets with microfluidics technologies to create engineered cancer microspheres. Specifically, we employ biosynthetic hydrogels composed of conjugated poly(ethylene glycol) (PEG) and fibrinogen protein (PEG-Fb) to create engineered breast and colorectal cancer tissue microspheres for 3D culture, tumorigenic characterization, and examination of potential for high-throughput screening (HTS). MCF7 and MDA-MB-231 cell lines were used to create breast cancer microspheres and the HT29 cell line and cells from a stage II patient-derived xenograft (PDX) were encapsulated to produce colorectal cancer (CRC) microspheres. Using our previously developed microfluidic system, highly uniform cancer microspheres (intra-batch coefficient of variation (CV) ≤ 5%, inter-batch CV < 2%) with high cell densities (>20×106 cells/ml) were produced rapidly, which is critical for use in drug testing. Encapsulated cells maintained high viability and displayed cell type-specific differences in morphology, proliferation, metabolic activity, ultrastructure, and overall microsphere size distribution and bulk stiffness. For PDX CRC microspheres, the percentage of human (70%) and CRC (30%) cells was maintained over time and similar to the original PDX tumor, and the mechanical stiffness also exhibited a similar order of magnitude (103 Pa) to the original tumor. The cancer microsphere system was shown to be compatible with an automated liquid handling system for administration of drug compounds; MDA-MB-231 microspheres were distributed in 384 well plates and treated with staurosporine (1 μM) and doxorubicin (10 μM). Expected responses were quantified using CellTiter-Glo® 3D, demonstrating initial applicability to HTS drug discovery. PDX CRC microspheres were treated with Fluorouracil (5FU) (10 to 500 μM) and displayed a decreasing trend in metabolic activity with increasing drug concentration. Providing a more physiologically relevant tumor microenvironment in a high-throughput and low-cost manner, the PF hydrogel-based cancer microspheres could potentially improve the translational success of drug candidates by providing more accurate in vitro prediction of in vivo drug efficacy. Citation Format: Elizabeth A. Lipke, Wen J. Seeto, Yuan Tian, Mohammadjafar Hashemi, Iman Hassani, Benjamin Anbiah, Nicole L. Habbit, Michael W. Greene, Dmitriy Minond, Shantanu Pradhan. Production of cancer tissue-engineered microspheres for high-throughput screening [abstract]. In: Proceedings of the American Association for Cancer Research Annual Meeting 2022; 2022 Apr 8-13. Philadelphia (PA): AACR; Cancer Res 2022;82(12_Suppl):Abstract nr 175.more » « less
-
more » « less
Abstract Susceptibility of mammalian cells against harsh processing conditions limit their use in cell transplantation and tissue engineering applications. Besides modulation of the cell microenvironment, encapsulation of mammalian cells within hydrogel microbeads attract attention for cytoprotection through physical isolation of the encapsulated cells. The hydrogel formulations used for cell microencapsulation are largely dominated by ionically crosslinked alginate (Alg), which suffer from low structural stability under physiological culture conditions and poor cell–matrix interactions. Here the fabrication of Alg templated silk and silk/gelatin composite hydrogel microspheres with permanent or on‐demand cleavable enzymatic crosslinks using simple and cost‐effective centrifugation‐based droplet processing are demonstrated. The composite microbeads display structural stability under ion exchange conditions with improved mechanical properties compared to ionically crosslinked Alg microspheres. Human mesenchymal stem and neural progenitor cells are successfully encapsulated in the composite beads and protected against environmental factors, including exposure to polycations, extracellular acidosis, apoptotic cytokines, ultraviolet (UV) irradiation, anoikis, immune recognition, and particularly mechanical stress. The microbeads preserve viability, growth, and differentiation of encapsulated stem and progenitor cells after extrusion in viscous polyethylene oxide solution through a 27‐gauge fine needle, suggesting potential applications in injection‐based delivery and three‐dimensional bioprinting of mammalian cells with higher success rates.
-
more » « less
Key points Imaging techniques such as contrast echocardiography suggest that anatomical intra‐pulmonary arteriovenous anastomoses (IPAVAs) are present at rest and are recruited to a greater extent in conditions such as exercise. IPAVAs have the potential to act as a shunt, although gas exchange methods have not demonstrated significant shunt in the normal lung.
To evaluate this discrepancy, we compared anatomical shunt with 25‐µm microspheres to contrast echocardiography, and gas exchange shunt measured by the multiple inert gas elimination technique (MIGET).
Intra‐pulmonary shunt measured by 25‐µm microspheres was not significantly different from gas exchange shunt determined by MIGET, suggesting that MIGET does not underestimate the gas exchange consequences of anatomical shunt.
A positive agitated saline contrast echocardiography score was associated with anatomical shunt measured by microspheres. Agitated saline contrast echocardiography had high sensitivity but low specificity to detect a ≥1% anatomical shunt, frequently detecting small shunts inconsequential for gas exchange.
Abstract The echocardiographic visualization of transpulmonary agitated saline microbubbles suggests that anatomical intra‐pulmonary arteriovenous anastomoses are recruited during exercise, in hypoxia, and when cardiac output is increased pharmacologically. However, the multiple inert gas elimination technique (MIGET) shows insignificant right‐to‐left gas exchange shunt in normal humans and canines. To evaluate this discrepancy, we measured anatomical shunt with 25‐µm microspheres and compared the results to contrast echocardiography and MIGET‐determined gas exchange shunt in nine anaesthetized, ventilated canines. Data were acquired under the following conditions: (1) at baseline, (2) 2 µg kg−1 min−1
i.v. dopamine, (3) 10 µg kg−1 min−1i.v. dobutamine, and (4) following creation of an intra‐atrial shunt (in four animals). Right to left anatomical shunt was quantified by the number of 25‐µm microspheres recovered in systemic arterial blood. Ventilation–perfusion mismatch and gas exchange shunt were quantified by MIGET and cardiac output by direct Fick. Left ventricular contrast scores were assessed by agitated saline bubble counts, and separately by appearance of 25‐µm microspheres. Across all conditions, anatomical shunt measured by 25‐µm microspheres was not different from gas exchange shunt measured by MIGET (microspheres: 2.3 ± 7.4%; MIGET: 2.6 ± 6.1%,P = 0.64). Saline contrast bubble score was associated with microsphere shunt (ρ = 0.60,P < 0.001). Agitated saline contrast score had high sensitivity (100%) to detect a ≥1% shunt, but low specificity (22–48%). Gas exchange shunt by MIGET does not underestimate anatomical shunt measured using 25‐µm microspheres. Contrast echocardiography is extremely sensitive, but not specific, often detecting small anatomical shunts which are inconsequential for gas exchange.
