Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • Mo2P Monolayer as a Superior Electrocatalyst for Urea Synthesis from Nitrogen and Carbon Dioxide Fixation: A Computational Study
Title: Mo2P Monolayer as a Superior Electrocatalyst for Urea Synthesis from Nitrogen and Carbon Dioxide Fixation: A Computational Study
Urea synthesis through the simultaneous electrocatalytic reduction of N2and CO2molecules under ambient conditions holds great promises as a sustainable alternative to its industrial production, in which the development of stable, highly efficient, and highly selective catalysts to boost the chemisorption, activation, and coupling of inert N2and CO2molecules remains rather challenging. Herein, by means of density functional theory computations, we proposed a new class of two‐dimensional nanomaterials, namely, transition‐metal phosphide monolayers (TM2P, TM = Ti, Fe, Zr, Mo, and W), as the potential electrocatalysts for urea production. Our results showed that these TM2P materials exhibit outstanding stability and excellent metallic properties. Interestingly, the Mo2P monolayer was screened out as the best catalyst for urea synthesis due to its small kinetic energy barrier (0.35 eV) for C–N coupling, low limiting potential (−0.39 V), and significant suppressing effects on the competing side reactions. The outstanding catalytic activity of the Mo2P monolayer can be ascribed to its optimal adsorption strength with the key *NCON species due to its moderate positive charges on the Mo active sites. Our findings not only propose a novel catalyst with high‐efficiency and high‐selectivity for urea production but also further widen the potential applications of metal phosphides in electrocatalysis.  more » « less
Award ID(s):
1736093
PAR ID:
10497658
Author(s) / Creator(s):
; ; ; ; ; ;
Publisher / Repository:
Wiley
Date Published:
Journal Name:
ENERGY & ENVIRONMENTAL MATERIALS
Volume:
7
Issue:
1
ISSN:
2575-0356
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; (, ChemSusChem)
    Urea is an essential fertilizer produced through the industrial synthesis of ammonia (NH3) via the Haber–Bosch process, which contributes ≈1.2% of global annual CO2emissions. Electrocatalytic urea synthesis under ambient conditions via CN coupling from CO2and nitrogen species such as nitrate (NO3−), nitrite (NO2−), nitric oxide (NO), and nitrogen gas (N2) has gained interest as a more sustainable route. However, challenges remain due to the unclear reaction pathways for urea formation, competing reactions, and the complexity of the resulting product matrix. This review highlights recent advances in catalyst design, urea quantification, and intermediate identification in the CN coupling reaction for electrocatalytic urea synthesis. Furthermore, this review explores future prospects for industrial CN coupling, considering potential nitrogen and carbon sources and examining alternative CN coupling products, such as amides and amines. 
    more » « less
  2. ; ; (, Biofuels, Bioproducts and Biorefining)
    Abstract The catalytic hydrothermal liquefaction of biomass under a hydrogen atmosphere is a promising technology to produce stable biocrude oil as a sustainable alternative to petroleum crude. A series of iron‐based non‐noble mix metal‐oxide‐on‐silica catalysts were evaluated to mimic the natural transformation that may have led to the conversion of terrestrial biomass to fossilized fuels. Switchgrass powder was liquefied to a stable bio‐oil with a 71.2% yield by using FeOx/SiO2catalyst in ethanol under a 5.5 MPa hydrogen atmosphere at 210 °C. The use of Fe‐MOx/SiO2(M = V, Mn, Co, Ni, Cu and Mo) type bimetallic oxide catalysts instead of FeOx/SiO2can produce improvements in liquefaction yields by using Mn, Co, Ni, and Cu as the second metal. The highest liquefaction yield of 78.8% was observed with the Fe‐CuOx/SiO2catalyst. Liquefaction oils were formed that were composed of complex mixtures of C6‐C12 alcohols, esters, aldehydes, and phenols. The lignin products:holocellulose products ratio changed in the range 0.35 to 0.15 and the composition of oils changed significantly with the use of mixed metal oxides in place of single metal FeOx/SiO2The most effective catalyst, Fe‐CuOx/SiO2could be reused in five cycles with a small loss in liquefaction yield from 78.8% to 70.0% after four reuse cycles and after regeneration of the catalyst at 500 °C for 3 h in air. 
    more » « less
  3. ; ; ; ; ; ; ; ; ; ; et al (, Angewandte Chemie International Edition)
    Abstract Aldehyde‐assisted water electrolysis offers an attractive pathway for energy‐saving bipolar hydrogen production with combined faradaic efficiency (FE) of 200% while converting formaldehyde into value‐added formate. Herein we report the design and synthesis of noble metal‐free Cu6Sn5alloy as a highly effective electrocatalyst for formaldehyde electro‐oxidative dehydrogenation, demonstrating a geometric current density of 915 ± 46 mA cm−2at 0.4 V versus reversible hydrogen electrode, outperforming many noble metal electrocatalysts reported previously. The formaldehyde‐assisted water electrolyzer delivers 100 mA cm−2at a low cell voltage of 0.124 V, and a current density of 486 ± 20 mA cm−2at a cell voltage of 0.6 V without any iR compensation and exhibits nearly 200% faradaic efficiency for bipolar hydrogen production at 100 mA cm−2in 88 h long‐term operation. Density functional theory calculations further confirm the notably lowered barriers for dehydrogenation and Tafel steps on the Cu₆Sn₅ surface compared to Cu, underscoring its potential as a highly active catalyst. 
    more » « less
  4. ; (, Nanoscale)
    By means of density functional theory (DFT) computations, we systemically investigated CO/O 2 adsorption and CO oxidation pathways on a bi-atom catalyst, namely, a copper dimer anchored on a C 2 N monolayer (Cu 2 @C 2 N), and we compared it with its monometallic counterpart Cu 1 @C 2 N. The Cu dimer could be stably embedded into the porous C 2 N monolayer. The reactions between the adsorbed O 2 and CO via both bi-molecular and tri-molecular Langmuir–Hinshelwood (L–H) and Eley–Rideal (E–R) mechanisms were comparably studied, and we found that the bi-atom catalyst Cu 2 @C 2 N possessed superior performance toward CO oxidation as compared to the single-atom catalyst Cu 1 @C 2 N. Our comparative study suggested that the newly predicted bi-atom catalyst, i.e. , a copper dimer anchored on a suitable support is highly active for CO oxidation, which can provide a useful guideline for further developing highly effective and low-cost green nanocatalysts. 
    more » « less
  5. ; ; ; ; (, ECS Transactions)
    Doped perovskite metal oxide catalysts of the form A(BxM1-x)O3-δhave been instrumental in the development of solid oxide electrolyzers/fuel cells. In addition, this material class has also been demonstrated to be effective as a heterogeneous catalyst. Co-doped barium niobate perovskites have shown remarkable stability in highly acidic CO2sensing measurements/environments (1). However, the reason for their chemical stability is not well understood. Doping with transition metal cations for B site cations often leads to exsolution under reducing conditions. Many perovskites used for the oxidative coupling of methane (OCM) or the electrochemical oxidative coupling of methane (E-OCM) either lack long term stability, or catalytic activity within these highly reducing methane environments. The Mg and Fe co-doped barium niobate BaMg0.33Nb0.67-xFexO3-δshown activity in E-OCM reactors over long periods (2) (>100 hrs) with no iron metal exsolution observed by diffraction or STEM EDX measurements. In contrast, iron decorated BaMg0.33Nb0.67O3showed little C2 conversion activity. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Text Encoded Conversion
  • XML
  • Save / Share this Record
  • Send to Email