An official website of the United States government
Biomass fast pyrolysis has emerged as a highly promising technology for producing renewable fuels and chemicals. However, the inherent multi-scale and multiphase nature of the process and the heterogeneous nature of biomass feedstocks typically lead to low selectivity toward each bio-oil molecule, posing significant commercialization challenges. Molecular-level understanding of the biomass pyrolysis reaction kinetics considering the interactions between the main constituents (i.e., cellulose, hemicellulose, and lignin) is essential to advance the macroscopic design, scale-up, and optimization of the process. In this work, microreactor experiments were conducted to determine the effects of lignin structures on the yields of cellulose-derived products during pyrolysis. We show that levoglucosan formation is inhibited by the β-O-4 lignin linkages or catalyzed by the 5-5 linkages, glycolaldehyde formation is catalyzed by the β-O-4 linkages or inhibited by the 5-5 linkages, and 5-hydroxymethylfurfural formation is inhibited by either linkage. Density functional theory calculations reveal that these catalytic and inhibitory effects on cellulose fast pyrolysis are induced by noncovalent interactions between cellulose and lignin. The molecular-level picture of cellulose–lignin interactions uncovered in this work paves the way for further use of genetic engineering to grow new genotypes of biomass for selective production of value-added chemicals and machine learning approaches to obtain correlations between biomass structures and product yields for biomass fast pyrolysis.
more »
« less
Molten Plastic Induced Noncovalent Interactions for Tunable Cellulose Fast Pyrolysis
Fast pyrolysis of lignocellulosic biomass is a promising approach for producing biofuels and renewable chemicals, but the resultant bio-oil quality and diverse product distributions limit its widespread adaptation. Concurrently, the accumulation of waste plastics in the environment, particularly polyolefin thermoplastics, is becoming a growing threat. Co-pyrolysis of biomass with hydrogen-rich thermoplastics has shown promise for producing high-quality bio-oils, presenting an attractive solution to waste management. However, a molecular-level understanding of the synergy of the two components in the molten phase during co-pyrolysis is still lacking. In this work, we report the discovery of catalytic and inhibitory effects on cellulose fast pyrolysis caused by noncovalent interactions (NCIs) induced by molten plastics. Our microreactor experiments demonstrated that selectivity toward cellulose-derived anhydrosugars, small oxygenates, or furans increased due to the presence of polyketone, polyethylene glycol, or polystyrene, respectively, which are three thermoplastics with distinct functional groups. Density functional theory calculations reveal that key cellulose pyrolysis pathways leading to major products are catalyzed or inhibited due to perturbations of transition state geometries and partial charges caused by the NCIs induced by plastic functional groups. This discovery offers insights and opportunities for tuning cellulose fast pyrolysis via NCIs using a new family of unconventional molten plastic catalysts or inhibitors
more »
« less
- Award ID(s):
- 1847289
- PAR ID:
- 10497726
- Publisher / Repository:
- Royal Society of Chemistry
- Date Published:
- Journal Name:
- Green Chemistry
- Volume:
- 25
- Issue:
- 23
- ISSN:
- 1463-9262
- Page Range / eLocation ID:
- 10010 to 10019
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Despite the promise of waste-to-energy conversions, bio-oils produced via thermochemical techniques such as pyrolysis suf- fer from high viscosity and acidity, which render the oils unstable and corrosive. While pyrolysis biocrude can be upgraded downstream, the use of precious metal catalysts limits the economic feasibility of biomass to biofuel conversions. To address these economic limitations, the present work explores the use of clay minerals as inexpensive catalysts to upgrade bio-oils in situ. Cherry pits, a representative carbonaceous agro-industrial waste, were pyrolyzed at 600 °C for 1 h in the presence of a series of clay minerals. For some clays, the bio-oils produced from catalyzed pyrolysis exhibited lower oxygen and fatty acid content than bio-oil from non-catalyzed pyrolysis. The heterogeneous clay-cherry pit biochar mixtures had higher surface areas and surface chemistries with increased free and intermolecularly bonded hydroxyl groups relative to those of pure cherry pit biochar. However, adsorption studies using methylene blue as a model organic contaminant showed that these heterogenous chars had a decreased adsorption capacity, likely due to a loss of surface functional groups. The addition of clay materials to the pyrolysis stream yields a biocrude more amendable to downstream upgrading and a heterogeneous biochar-clay mixture capable of (though certainly not optimized for) adsorbing a model organic compound.more » « less
-
Subramaniam, B. Executive Editor (Ed.)This research presents pioneering work on transforming a variety of waste plastic into synthetic graphite of high quality and purity. Six recycled plastics in various forms were obtained – including reprocessed polypropylene, high-density polyethylene flakes, shredded polyethylene films, reprocessed polyethylene (all obtained from Pennsylvania Recycling Markets Center), polystyrene foams and polyethylene terephthalate bottles (both sourced from a local recycling bin). The waste plastics were carbonized in sealed tubing reactors. The study shows that this versatile process can be used on a mix of waste plastics in a variety of recycled forms to obtain a uniform graphitic carbon phase, hence addressing the challenges of separation and transportation faced by the plastic recycling industry. The conversion yield to elemental carbon for recycled plastics was improved by up to 250% by using graphene oxide (GO) additives. Five different grades of GO and graphene were used to gain insights into the interaction mechanisms between plastics and GO during pyrolysis. The effect of GO additives on carbonization was analyzed using thermogravimetric analysis / differential scanning calorimetry and ReaxFF-based reactive molecular dynamics simulations. The obtained cokes were graphitized at 2500 ℃ and the graphitic quality of the synthetic graphites was analyzed using X-ray diffraction, transmission electron microscopy, and Raman spectroscopy. The plastic waste-derived synthetic graphites exhibit remarkable graphitic quality with crystallite sizes comparable with a model graphitizable material – anthracene coke. The thin, flake-like morphology and nanostructure featuring well-stacked contiguous lamellae make these graphitic carbons highly promising candidates for energy storage applications. Based on our experiments and atomistic-scale simulations we propose interaction mechanisms between the plastic polymers and the graphenic additives that explain the chemical conversion pathways for GO-assisted waste plastic carbonization and graphitization.more » « less
-
Determination of olefins in pyrolysis oils from waste plastics and tires is crucial for optimizing the pyrolysis process and especially for the further advanced valorization of these oils in terms of the circular economy. Identifying olefins, even using high-resolution techniques like GC×GC, is challenging without TOF-MS, which allows modification of the ionization step. Currently, the only method for determining olefins in plastic pyrolysis oils is GC-VUV, recently standardized as ASTM D8519. However, TOF-MS and VUV are not affordable instruments for many research teams working on plastics recycling. This paper introduces a simple method for the selective micro-scale adsorption of olefins over AgNO3/SiO2, followed by the GC×GC-FID analysis. Olefins are determined indirectly from the loss of chromatographic area in respective hydrocarbon groups before and after removal. Only 50 μL sample and 15 min of sample separation are needed. Our method was extensively validated and provides a reliable determination of olefin content in a wide range of pyrolysis oils from plastics and tires and their products after mild hydrotreatment. It is affordable to all researchers and industrial companies working on plastics recycling by thermochemical processes as it does not require an MS detector.more » « less
-
Atmospheric pressure nonthermal plasma treatment can be a novel, green and low energy method to convert biomass to biobased chemicals. The unique physiochemistry of plasma discharge enables reactions within biomass that otherwise could not possibly occur under traditional conditions. In this study, we present a simple method of producing a high yield of levoglucosan from cellulose without using any catalysts, chemicals, solvents or vacuum, but by using plasma treatment to control the depolymerization mechanism of cellulose. Cellulose was first pretreated in a dielectric barrier discharge reactor operating in ambient air or argon for 10–60 s, followed by pyrolysis at 350–450 °C to produce up to 78.6% of levoglucosan. Without the plasma pretreatment, the maximum yield of levoglucosan from cellulose pyrolysis was 58.2%. The results of this study showed that the plasma pretreatment led to homolytic cleavage of glycosidic bonds. The resulting free radicals were then trapped within the cellulose structure when the plasma discharge stopped, allowing subsequent pyrolysis of the plasma-pretreated cellulose to proceed through a radical-based mechanism. The present results also revealed that although the radical-based mechanism is highly selective to levoglucosan formation, this pathway is usually discouraged when the untreated cellulose is pyrolyzed due to the high energy barrier for homolytic cleavage. Initiating homolytic cleavage during the plasma pretreatment also helped the pretreated cellulose to produce higher yields of levoglucosan using lower pyrolysis temperatures. At 375 °C, the levoglucosan yield was only 53.2% for the untreated cellulose, whereas the yield reached 77.6% for the argon-plasma pretreated cellulose.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1039/D3GC01312J
