An official website of the United States government
Degrading cellulose is a key step in the processing of lignocellulosic biomass into bioethanol. Cellobiose, the disaccharide product of cellulose degradation, has been shown to inhibit cellulase activity, but the mechanisms underlying product inhibition are not clear. We combined single-molecule imaging and biochemical investigations with the goal of revealing the mechanism by which cellobiose inhibits the activity ofTrichoderma reeseiCel7A, a well-characterized exo-cellulase. We find that cellobiose slows the processive velocity of Cel7A and shortens the distance moved per encounter; effects that can be explained by cellobiose binding to the product release site of the enzyme. Cellobiose also strongly inhibits the binding of Cel7A to immobilized cellulose, with a Kiof 2.1 mM. The isolated catalytic domain (CD) of Cel7A was also inhibited to a similar degree by cellobiose, and binding of an isolated carbohydrate-binding module to cellulose was not inhibited by cellobiose, suggesting that cellobiose acts on the CD alone. Finally, cellopentaose inhibited Cel7A binding at micromolar concentrations without affecting the enzyme’s velocity of movement along cellulose. Together, these results suggest that cellobiose inhibits Cel7A activity both by binding to the “back door” product release site to slow activity and to the “front door” substrate-binding tunnel to inhibit interaction with cellulose. These findings point to strategies for engineering cellulases to reduce product inhibition and enhance cellulose degradation, supporting the growth of a sustainable bioeconomy.
more »
« less
Xylan inhibition of cellulase binding and processivity observed at single-molecule resolution
Efficient cellulose degradation by cellulase enzymes is crucial for using lignocellulosic biomass in bioenergy production. Single-molecule microscopy showed that xylan hinders the efficiency of cellulase by inhibiting its binding to cellulose and impeding the processivity of bound enzyme molecules.
more »
« less
- Award ID(s):
- 2301377
- PAR ID:
- 10498166
- Publisher / Repository:
- Royal Society of Chemistry
- Date Published:
- Journal Name:
- RSC Sustainability
- ISSN:
- 2753-8125
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Phosphoethanolamine (pEtN) cellulose is a naturally occurring modified cellulose produced by several Enterobacteriaceae. The minimal components of theE. colicellulose synthase complex include the catalytically active BcsA enzyme, a hexameric semicircle of the periplasmic BcsB protein, and the outer membrane (OM)-integrated BcsC subunit containing periplasmic tetratricopeptide repeats (TPR). Additional subunits include BcsG, a membrane-anchored periplasmic pEtN transferase associated with BcsA, and BcsZ, a periplasmic cellulase of unknown biological function. While cellulose synthesis and translocation by BcsA are well described, little is known about its pEtN modification and translocation across the cell envelope. We show that the N-terminal cytosolic domain of BcsA positions three BcsG copies near the nascent cellulose polymer. Further, the semicircle’s terminal BcsB subunit tethers the N-terminus of a single BcsC protein in a trans-envelope secretion system. BcsC’s TPR motifs bind a putative cello-oligosaccharide near the entrance to its OM pore. Additionally, we show that only the hydrolytic activity of BcsZ but not the subunit itself is necessary for cellulose secretion, suggesting a secretion mechanism based on enzymatic removal of translocation incompetent cellulose. Lastly, protein engineering introduces cellulose pEtN modification in orthogonal cellulose biosynthetic systems. These findings advance our understanding of pEtN cellulose modification and secretion.more » « less
-
Abstract BackgroundCellulose degradation by cellulases has been studied for decades due to the potential of using lignocellulosic biomass as a sustainable source of bioethanol. In plant cell walls, cellulose is bonded together and strengthened by the polyphenolic polymer, lignin. Because lignin is tightly linked to cellulose and is not digestible by cellulases, is thought to play a dominant role in limiting the efficient enzymatic degradation of plant biomass. Removal of lignin via pretreatments currently limits the cost-efficient production of ethanol from cellulose, motivating the need for a better understanding of how lignin inhibits cellulase-catalyzed degradation of lignocellulose. Work to date using bulk assays has suggested three possible inhibition mechanisms: lignin blocks access of the enzyme to cellulose, lignin impedes progress of the enzyme along cellulose, or lignin binds cellulases directly and acts as a sink. ResultsWe used single-molecule fluorescence microscopy to investigate the nanoscale dynamics of Cel7A fromTrichoderma reesei, as it binds to and moves along purified bacterial cellulose in vitro. Lignified cellulose was generated by polymerizing coniferyl alcohol onto purified bacterial cellulose, and the degree of lignin incorporation into the cellulose meshwork was analyzed by optical and electron microscopy. We found that Cel7A preferentially bound to regions of cellulose where lignin was absent, and that in regions of high lignin density, Cel7A binding was inhibited. With increasing degrees of lignification, there was a decrease in the fraction of Cel7A that moved along cellulose rather than statically binding. Furthermore, with increasing lignification, the velocity of processive Cel7A movement decreased, as did the distance that individual Cel7A molecules moved during processive runs. ConclusionsIn an in vitro system that mimics lignified cellulose in plant cell walls, lignin did not act as a sink to sequester Cel7A and prevent it from interacting with cellulose. Instead, lignin both blocked access of Cel7A to cellulose and impeded the processive movement of Cel7A along cellulose. This work implies that strategies for improving biofuel production efficiency should target weakening interactions between lignin and cellulose surface, and further suggest that nonspecific adsorption of Cel7A to lignin is likely not a dominant mechanism of inhibition.more » « less
-
Development of efficient catalytic methods for the hydrolysis of cellulose is a major research challenge in sustainable biofuel and polymer areas. In this study five hydroxy sulfonic acids were studied as simple model compounds for cellulase enzyme for the hydrolysis of cellulose. The catalytic activities were measured by analysis of total reducing sugar (TRS) yields produced in a series of reactions carried out at 150–190 °C using 0.050 M aqueous hydroxy sulfonic acid solutions. The highest catalytic activity was observed with isethionic acid, producing 62.7% TRS yield at 180 °C after 4 hr. In the second phase of the work, Density Functional Theory (DFT) calculations were used to study the interactions between hydroxy sulfonic acids and cellulose model compound D-cellobiose to supplement the experimental results. The D-cellobiose – hydroxy sulfonic binding energies and the distance between glycosidic oxygen and -SO3H acidic H were evaluated and the -SO3H to glycosidic oxygen distance was identified as the more important parameter co-related to the catalytic activity. The isethionic acid with highest cellulose hydrolysis activity showed the shortest -SO3H to glycosidic oxygen distance of 1.744 Å.more » « less
-
Background:Polycarboxylic acids are of interest as simple mimics for cellulase enzyme catalyzed depolymerization of cellulose. In this study, DFT calculations were used to investigate the effect of structure on dicarboxylic acid organo-catalyzed hydrolysis of cellulose model compound D-cellobiose to D-glucose. Methods:Binding energy of the complex formed between D-cellobiose and acid (Ebind), as well as glycosidic oxygen to dicarboxylic acid closest acidic H distance were studied as key parameters affecting the turn over frequency of hydrolysis in water. Result:α-D-cellobiose - dicarboxylic acid catalyst down face approach showed high Ebind values for five of the six acids studied; indicating the favorability of down face approach. Maleic, cis-1,2-cyclohexane dicarboxylic, and phthalic acids with the highest catalytic activities showed glycosidic oxygen to dicarboxylic acid acidic H distances 3.5-3.6 Å in the preferred configuration. Conclusion:The high catalytic activities of these acids may be due to the rigid structure, where acid groups are held in a fixed geometry.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1039/D4SU00006D
