skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Transport of carboxylate salts of varying chain lengths in crosslinked polyether membranes
Carboxylate anions of various chain lengths are important molecules for many applications such as CO2 reduction, membrane-based bioreactors, etc. Also, carboxylate anions are ubiquitous in biological molecules such as amino acids, fatty acids, etc. Therefore, understanding the transport behavior of carboxylates of different chain lengths in polymer materials is important both as a fundamental phenomenon but also for designing materials for applications. Here, we characterized transport behavior by measuring the permeability (P), and total partition coefficient (K) for a series of polymer membranes for four model carboxylate salts—sodium salts of formate (NaOFm), acetate (NaOAc), propionate (NaOPr), and butanoate (NaOBu)—at varied upstream salt concentrations (0.1–1 M) or a series of polyethylene glycol diacrylate (PEGDA)-based membranes with 1) varying pre-polymerization water content; 2) varying uncharged side chain comonomer (polyethylene glycol methacrylate, PEGMA), and 3) varying charged comonomer)2-acrylamido-2-methyl-1-propanesulfonic acid, AMPS). Also, diffusivity values of the four salts through the membranes have been calculated based on the solution diffusion model equation (Pdouble bondK × D), experimentally obtained permeability, and total partition coefficients. For a majority of these membranes, NaOFm's permeability is much higher than the other three carboxylate salts (NaOAc, NaOPr, and NaOBu) seemingly due to the lower chain length and thereby smaller hydrated diameter. In terms of total partition coefficient, a size-based trend is not observed. For example, NaOBu's total partition coefficient (K) is generally the largest among the four, and at higher upstream salt concentrations (1 M), the values of the total partition coefficients of the four salts converge. From this we conclude that the carboxylate salt transport through these PEGDA-based non-porous dense membranes to be primarily driven by kinetics and not sorption.  more » « less
Award ID(s):
1936146
PAR ID:
10498869
Author(s) / Creator(s):
; ;
Publisher / Repository:
Elsevier
Date Published:
Journal Name:
Journal of Membrane Science
Volume:
699
Issue:
C
ISSN:
0376-7388
Page Range / eLocation ID:
122584
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; (, Membranes)
    Understanding multi-component transport through polymer membranes is critical for separation applications such as water purification, energy devices, etc. Specifically for CO2 reduction cells, where the CO2 reduction products (alcohols and carboxylate salts), crossover of these species is undesirable and improving the design of ion exchange membranes to prevent this behavior is needed. Previously, it was observed that acetate transport increased in copermeation with alcohols for cation exchange membranes consisting of poly(ethylene glycol) diacrylate (PEGDA) and 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS) and that the inclusion of poly(ethylene glycol) methacrylate (PEGMA) (n = 5, n represents the number of ethylene oxide repeat units) could suppress this behavior. Here, we further investigate the role of PEGMA in modulating fractional free volume and transport behavior of alcohols and carboxylates. PEGDA-PEGMA membranes of varied membranes are fabricated with both varied pre −polymerization water content at constant PEGMA (n = 9) content and varied PEGMA content at two pre −polymerization water contents (20 and 60 wt.% water). Permeability to sodium acetate also decreases in these charge-neutral PEGDA-PEGMA membranes compared to PEGMA-free films. Therefore, incorporation of comonomers such as PEGMA with long side chains may provide a useful membrane chemistry structural motif for preventing undesirable carboxylate crossover in polymer membranes. 
    more » « less
  2. ; ; ; ; (, Journal of Membrane Science Letters)
    Understanding the mechanisms of molecular transport in polyamide membranes is imperative to improve their solute-specific selectivity. We explored the partitioning behaviors of water and salts in polyamide membranes to elucidate the role of ion-membrane interactions in the transport. Quartz crystal microbalance (QCM) was employed to quantify the mass uptake at different temperatures and determine partition energies (Ek) for water and salts under two different pH values. Zeta potential and permeability tests were conducted to support the ionmembrane affinity trends observed with QCM and link these trends to ion-ion selectivity. Our results demonstrate a high affinity of water to the polyamide membrane (Ek < 0), with a significant swelling effect attributed to dipole interactions and hydrogen bonding. Ion partitioning revealed distinct differences between monovalent and divalent cations, as well as between kosmotropic and chaotropic anions. Specifically, divalent cations (Ca2+ and Mg2+) exhibited considerably lower partition energies (-0.99 and 0.29 kcal mol-1, respectively) and more efficient charge neutralization, indicating stronger interactions with the membrane compared to monovalent cations (~2.2 kcal mol-1). The partition energies of the chaotropic iodide and kosmotropic sulphate anions were substantially different (-5.5 and 4.0 kcal mol-1, respectively), likely due to the different tendency of these anions to shed their hydration shell and stick to the polymer. Last, our permeability tests indicate the potential existence of an intrinsic tradeoff between ion partitioning and intrapore diffusion, presumably due to the opposite effects that ion-membrane interactions have on these transport steps. Overall, our work underscores the role of ionspecific interactions in membrane transport and selectivity. 
    more » « less
  3. ; ; ; ; ; (, Organometallics)
    We report the design and synthesis of an α-diimine PdII catalyst that copolymerizes functionalized and long chain α-olefins to produce semicrystalline polyethylene materials. Through a chain-straightening polymerization mechanism, the catalyst afforded high-melting point polymers with Tm values of up to 120 °C. The chain-straightening polymerization operates with high [ω,1]-insertion selectivity at high alkene concentrations and with varying α-olefin chain lengths, including propylene. The Pd catalyst can copolymerize 1-decene and methyl decenoate into semicrystalline ester-functionalized polymers with incorporation percentages proportional to the comonomer ratio (up to 13 mol %). 13C nuclear magnetic resonance and isotope labeling studies revealed that the improved selectivity relative to those of other systems arises from a high selectivity for [2,1]-insertion (96%) coupled with rapid chain-walking for a total of 90 mol % of 1-decene undergoing net [10,1]-insertion. 
    more » « less
  4. ; (, Talanta)
    Cation exchange membranes (CEMs) are widely used in many applications. The fixed anionic groups e.g., COO􀀀 , –SO3 - , etc. in the polymer matrix ideally allows the passage only of oppositely charged cations, driven by a potential or a concentration gradient. Anions, charged negative, the same as the membrane matrix, cannot pass through the membrane due to electrostatic repulsion. Such “Donnan-forbidden” passage can, however, occur to some degree, if the electrical or concentration gradient is high enough to overcome the “Donnan barrier”. Except for salt uptake/transport in concentrated salt solutions, the factors that govern such Forbidden Ion Transport (FIT) have rarely been studied. In most applications of transmembrane ion transport, whether electrically driven as in electrodialysis, or concentration-driven, it is the transport of the counterion to the fixed charged groups, such as that of the proton through a CEM, that is usually of interest. Nevertheless, CEMs are also of interest in analytical chemistry, specifically in suppressed ion chromatography. As used in membrane suppressors, both transport of permitted ions and rejection of forbidden ions are important. If the latter is indeed governed by electrostatic factors, other things being equal, the primary governing factor should be the charge density of the membrane, tantamount to its ion exchange capacity (IEC). In fabricating microscale suppressors, we found useful to synthesize a new ion exchange polymer that can be easily molded to make tubular microconduits. Despite a high IEC of this material, FIT was also found to be surprisingly high. We measured several relevant properties for thirteen commercial and four custom-made membranes to discover that while FIT is indeed linearly related to 1/ IEC for a significant number of these membranes, for very high water-content membranes, FIT may be overwhelmingly governed by the water content of the membrane. In addition, FIT through all CEMs differ greatly among strong acids, they may still be transported as the molecular acids and the extent is in the same order as the expected activity of the molecular acid in the CEM. These results are discussed with the perspective that even for strong acids, the transport does take place as un-ionized molecular acids. 
    more » « less
  5. ; ; ; (, Acta Crystallographica Section C Structural Chemistry)
    2,4,6-Triaminopyrimidine is an interesting and challenging molecule due to the presence of multiple hydrogen-bond donors and acceptors. Its noncovalent interactions with a variety of carboxylic acids provide several supramolecular aggregates with frequently occurring molecular synthons. The present work focuses on the supramolecular interactions of 2,4,6-triaminopyrimidinium 3-(indol-3-yl)propionate–3-(indol-3-yl)propionic acid (1/1), C4H8N5+·C11H10NO2−·C11H11NO2, (I), 2,4,6-triaminopyrimidinium 2-(indol-3-yl)acetate, C4H8N5+·C10H8NO2−, (II), 2,4,6-triaminopyrimidinium 5-bromothiophene-2-carboxylate, C4H8N5+·C5H2BrO2S−, (III), and 2,4,6-triaminopyrimidinium 5-chlorothiophene-2-carboxylate, C4H8N5+·C5H2ClO2S−, (IV). All four salts exhibit robust homomeric and heteromericR22(8) ring motifs. Salts (I) and (II) develop sextuple [in (I)] and quadruple [in (I) and (II)] hydrogen-bonded arrays through fused-ring motifs. Salt (II) exhibits a rosette-like architecture. Salt (IV) is isostructural and isomorphous with salt (III), exhibiting an identical crystal structure with a different composition and an identical supramolecular architecture. In salts (III) and (IV), a linear hetero-tetrameric motif is formed and, in addition, both salts exhibit halogen–π interactions which enhance the crystal stability. All four salts develop a supramolecular hydrogen-bonded pattern facilitated by several N—H...O and N—H...N hydrogen bonds with multiple furcated donors and acceptors. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email