An official website of the United States government
ABSTRACT Radiative cooling and active galactic nucleus heating are thought to form a feedback loop that regulates the evolution of low-redshift cool-core galaxy clusters. Numerical simulations suggest that the formation of multiphase gas in the cluster core imposes a floor on the ratio of cooling time (tcool) to free-fall time (tff) at min(tcool/tff) ≈ 10. Observations of galaxy clusters show evidence for such a floor, and usually the cluster cores with min(tcool/tff) ≲ 30 contain abundant multiphase gas. However, there are important outliers. One of them is Abell 2029 (A2029), a massive galaxy cluster (M200 ≳ 1015 M⊙) with min(tcool/tff) ∼ 20, but little apparent multiphase gas. In this paper, we present high-resolution 3D hydrodynamic adaptive mesh refinement simulations of a cluster similar to A2029 and study how it evolves over a period of 1–2 Gyr. Those simulations suggest that A2029 self-regulates without producing multiphase gas because the mass of its central black hole ($${\sim} 5 \times 10^{10} \, \mathrm{ M}_\odot$$) is great enough for Bondi accretion of hot ambient gas to produce enough feedback energy to compensate for radiative cooling.
more »
« less
Accretion onto disc galaxies via hot and rotating CGM inflows
ABSTRACT Observed accretion rates onto the Milky Way and other local spirals fall short of that required to sustain star formation for cosmological timescales. A potential avenue for this unseen accretion is a rotating inflow in the volume-filling hot phase ($$\sim 10^6\, {\rm K}$$) of the circumgalactic medium (CGM), as suggested by some cosmological simulations. Using hydrodynamic simulations and a new analytic solution valid in the slow-rotation limit, we show that a hot inflow spins up as it approaches the galaxy, while remaining hot, subsonic, and quasi-spherical. Within the radius of angular momentum support ($$\sim 15\, {\rm kpc}$$ for the Milky Way) the hot flow flattens into a disc geometry and then cools from $$\sim 10^6$$ to $$\sim 10^4\, {\rm K}$$ at the disc–halo interface. Cooling affects all hot gas, rather than just a subset of individual gas clouds, implying that accretion via hot inflows does not rely on local thermal instability in contrast with ‘precipitation’ models for galaxy accretion. Prior to cooling and accretion the inflow completes ≈tcool/tff radians of rotation, where tcool/tff is the cooling time to free-fall time ratio in hot gas immediately outside the galaxy. The ratio tcool/tff may thus govern the development of turbulence and enhancement of magnetic fields in gas accreting onto low-redshift spirals. We show that if rotating hot inflows are common in Milky-Way-size disc galaxies, as predicted, then signatures of the expected hot gas rotation profile should be observable with X-ray telescopes and fast radio burst surveys.
more »
« less
- PAR ID:
- 10501228
- Publisher / Repository:
- Oxford University Press
- Date Published:
- Journal Name:
- Monthly Notices of the Royal Astronomical Society
- Volume:
- 530
- Issue:
- 2
- ISSN:
- 0035-8711
- Format(s):
- Medium: X Size: p. 1711-1731
- Size(s):
- p. 1711-1731
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
null (Ed.)ABSTRACT We examine the thermodynamic state and cooling of the low-z circumgalactic medium (CGM) in five FIRE-2 galaxy formation simulations of Milky Way-mass galaxies. We find that the CGM in these simulations is generally multiphase and dynamic, with a wide spectrum of largely non-linear density perturbations sourced by the accretion of gas from the intergalactic medium (IGM) and outflows from both the central and satellite galaxies. We investigate the origin of the multiphase structure of the CGM with a particle-tracking analysis and find that most of the low-entropy gas has cooled from the hot halo as a result of thermal instability triggered by these perturbations. The ratio of cooling to free-fall time-scales tcool/tff in the hot component of the CGM spans a wide range of ∼1−100 at a given radius but exhibits approximately constant median values of ∼5−20 at all radii 0.1Rvir < r < Rvir. These are similar to the ≈10−20 value typically adopted as the thermal instability threshold in ‘precipitation’ models of the ICM. Consequently, a one-dimensional model based on the assumption of a constant tcool/tff and hydrostatic equilibrium approximately reproduces the number density and entropy profiles of each simulation but only if it assumes the metallicity profile and temperature boundary condition taken directly from the simulation. We explicitly show that the tcool/tff value of a gas parcel in the hot component of the CGM does not predict its probability of subsequently accreting on to the central galaxy. This suggests that the value of tcool/tff is a poor predictor of thermal stability in gaseous haloes in which large-amplitude density perturbations are prevalent.more » « less
-
ABSTRACT We use FIRE simulations to study disc formation in z ∼ 0, Milky Way-mass galaxies, and conclude that a key ingredient for the formation of thin stellar discs is the ability for accreting gas to develop an aligned angular momentum distribution via internal cancellation prior to joining the galaxy. Among galaxies with a high fraction ($$\gt 70{{\ \rm per\ cent}}$$) of their young stars in a thin disc (h/R ∼ 0.1), we find that: (i) hot, virial-temperature gas dominates the inflowing gas mass on halo scales (≳20 kpc), with radiative losses offset by compression heating; (ii) this hot accretion proceeds until angular momentum support slows inward motion, at which point the gas cools to $$\lesssim 10^4\, {\rm K}$$; (iii) prior to cooling, the accreting gas develops an angular momentum distribution that is aligned with the galaxy disc, and while cooling transitions from a quasi-spherical spatial configuration to a more-flattened, disc-like configuration. We show that the existence of this ‘rotating cooling flow’ accretion mode is strongly correlated with the fraction of stars forming in a thin disc, using a sample of 17 z ∼ 0 galaxies spanning a halo mass range of 1010.5 M⊙ ≲ Mh ≲ 1012 M⊙ and stellar mass range of 108 M⊙ ≲ M⋆ ≲ 1011 M⊙. Notably, galaxies with a thick disc or irregular morphology do not undergo significant angular momentum alignment of gas prior to accretion and show no correspondence between halo gas cooling and flattening. Our results suggest that rotating cooling flows (or, more generally, rotating subsonic flows) that become coherent and angular momentum-supported prior to accretion on to the galaxy are likely a necessary condition for the formation of thin, star-forming disc galaxies in a ΛCDM universe.more » « less
-
ABSTRACT In several models of galaxy formation feedback occurs in cycles or mainly at high redshift. At times and in regions where feedback heating is ineffective, hot gas in the galaxy halo is expected to form a cooling flow, where the gas advects inward on a cooling timescale. Cooling flow solutions can thus be used as a benchmark for observations and simulations to constrain the timing and extent of feedback heating. Using analytic calculations and idealized 3D hydrodynamic simulations, we show that for a given halo mass and cooling function, steady-state cooling flows form a single-parameter family of solutions, while initially hydrostatic gaseous haloes converge on one of these solutions within a cooling time. The solution is thus fully determined once either the mass inflow rate $${\dot{M}}$$ or the total halo gas mass are known. In the Milky Way halo, a cooling flow with $${\dot{M}}$$ equal to the star formation rate predicts a ratio of the cooling time to the free-fall time of ∼10, similar to some feedback-regulated models. This solution also correctly predicts observed $$\rm{O\,{\small VII}}$$ and $$\rm{O\,{\small VIII}}$$ absorption columns, and the gas density profile implied by $$\rm{O\,{\small VII}}$$ and $$\rm{O\,{\small VIII}}$$ emission. These results suggest ongoing heating by feedback may be negligible in the inner Milky-Way halo. Extending similar solutions out to the cooling radius however underpredicts observed $$\rm{O\,{\small VI}}$$ columns around the Milky-Way and around other low-redshift star-forming galaxies. This can be reconciled with the successes of the cooling flow model with either a mechanism which preferentially heats the $$\rm{O\,{\small VI}}$$-bearing outer halo, or alternatively if $$\rm{O\,{\small VI}}$$ traces cool photoionized gas beyond the accretion shock. We also demonstrate that the entropy profiles of some of the most relaxed clusters are reasonably well described by a cooling flow solution.more » « less
-
ABSTRACT Understanding the survival, growth, and dynamics of cold gas is fundamental to galaxy formation. While there has been a plethora of work on ‘wind tunnel’ simulations that study such cold gas in winds, the infall of this gas under gravity is at least equally important, and fundamentally different since cold gas can never entrain. Instead, velocity shear increases and remains unrelenting. If these clouds are growing, they can experience a drag force due to the accretion of low-momentum gas, which dominates over ram pressure drag. This leads to subvirial terminal velocities, in line with observations. We develop simple analytic theory and predictions based on turbulent radiative mixing layers. We test these scalings in 3D hydrodynamic simulations, both for an artificial constant background and a more realistic stratified background. We find that the survival criterion for infalling gas is more stringent than in a wind, requiring that clouds grow faster than they are destroyed ($$t_{\rm grow} \lt 4\, t_{\rm cc}$$). This can be translated to a critical pressure, which for Milky Way-like conditions is $$P \sim 3000 \, {k}_\mathrm{ B} \, {\rm K}\, {\rm cm}^{-3}$$. Cold gas that forms via linear thermal instability (tcool/tff < 1) in planar geometry meets the survival threshold. In stratified environments, larger clouds need only survive infall until cooling becomes effective. We discuss applications to high-velocity clouds and filaments in galaxy clusters.more » « less
